Material Material |
---|
|
Temper Rating Temper Rating | Show |
---|
|
Temper Rating Temper Rating | Hide |
---|
|
|
Bendable Bendable |
---|
|
Form Form |
---|
|
For Use With For Use With |
---|
|
Compatible Tube Fittings Compatible Tube Fittings |
---|
![]() | ![]() |
Solder Connect | Compression |
![]() | ![]() |
Push to Connect | Flared |
Bending Method Bending Method |
---|
|
Specifications Met Specifications Met |
---|
|
Flareable Flareable |
---|
|
ID ID |
---|
Fabrication Fabrication |
---|
|
Maximum Pressure Maximum Pressure |
---|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Environment Environment |
---|
|
Exterior Finish Exterior Finish |
---|
|
More
This tubing has good corrosion resistance and excellent heat transfer qualities. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting. All tubing meets international standards for copper tubing.
Note: Tube size is an accepted industry designation, not an actual size.
For technical drawings and 3-D models, click on a part number.
Tube Size | OD | Wall Thick. | ID | Max. Pressure | Temper Rating | 10 ft. | 50 ft. | |
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||||
---|---|---|---|---|---|---|---|---|
1/8 | 1/4" | 0.049" | 0.152" | 2,200 psi @ 72° F | Soft | 00000000 | ||
1/8 | 1/4" | 0.065" | 0.12" | 2,900 psi @ 72° F | Soft | 00000000 | ||
__ | 5/16" | 0.049" | 0.215" | 1,700 psi @ 72° F | Soft | 00000000 | ||
__ | 5/16" | 0.065" | 0.183" | 2,200 psi @ 72° F | Soft | 00000000 | ||
1/4 | 3/8" | 0.049" | 0.277" | 1,400 psi @ 72° F | Soft | 00000000 | ||
1/4 | 3/8" | 0.065" | 0.245" | 1,800 psi @ 72° F | Soft | 00000000 | ||
3/8 | 1/2" | 0.049" | 0.402" | 1,000 psi @ 72° F | Soft | 00000000 | ||
3/8 | 1/2" | 0.065" | 0.37" | 1,400 psi @ 72° F | Soft | 00000000 | ||
1/2 | 5/8" | 0.065" | 0.495" | 1,000 psi @ 72° F | Soft | 00000000 | ||
5/8 | 3/4" | 0.065" | 0.62" | 890 psi @ 72° F | Soft | 00000000 | ||
__ | 1" | 0.065" | 0.87" | 640 psi @ 72° F | Soft | 00000000 |
10 m | ||||||
---|---|---|---|---|---|---|
OD, mm | Wall Thick., mm | ID, mm | Max. Pressure | Temper Rating | Each | |
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
4 | 1 | 2 | 3,400 psi @ 72° F | Soft | 0000000 | 0000000 |
6 | 1 | 4 | 2,000 psi @ 72° F | Soft | 0000000 | 000000 |
8 | 1 | 6 | 1,300 psi @ 72° F | Soft | 0000000 | 000000 |
10 | 1 | 8 | 1,000 psi @ 72° F | Soft | 0000000 | 000000 |
12 | 1 | 10 | 790 psi @ 72° F | Soft | 0000000 | 000000 |
14 | 1 | 12 | 840 psi @ 72° F | Soft | 0000000 | 000000 |
16 | 1 | 14 | 730 psi @ 72° F | Soft | 0000000 | 000000 |
18 | 1 | 16 | 730 psi @ 72° F | Soft | 0000000 | 000000 |
20 | 1 | 18 | 580 psi @ 72° F | Soft | 0000000 | 000000 |
This Type K tubing has the thickest walls of all our copper tubing for drinking water to handle the highest pressures. It is also known as copper pipe. Tubing has good corrosion resistance and excellent heat transfer qualities. It is seamless, so it has a smooth interior for unrestricted flow. It meets NSF/ANSI 61 safety standards for use with drinking water systems.
Coiled tubing can be flared without splitting.
Note: Tube size is an accepted industry designation, not an actual size.
For technical drawings and 3-D models, click on a part number.
Tube Size | OD | Wall Thick. | ID | Max. Pressure | Bendable | Temper Rating | Copper Tubing Type | Specifications Met | 60 ft. | 100 ft. | |
1/4 | 3/8" | 0.035" | 0.305" | 1,000 psi @ 72° F | Yes | Soft | K | ASTM B88, NSF/ANSI 61 | 00000000 | ||
3/8 | 1/2" | 0.049" | 0.402" | 1,100 psi @ 72° F | Yes | Soft | K | ASTM B88, NSF/ANSI 61 | 00000000 | ||
1/2 | 5/8" | 0.049" | 0.527" | 890 psi @ 72° F | Yes | Soft | K | ASTM B88, NSF/ANSI 61 | 00000000 | ||
5/8 | 3/4" | 0.049" | 0.652" | 730 psi @ 72° F | Yes | Soft | K | ASTM B88, NSF/ANSI 61 | 00000000 | ||
3/4 | 7/8" | 0.065" | 0.745" | 850 psi @ 72° F | Yes | Soft | K | ASTM B88, NSF/ANSI 61 | 00000000 | ||
1 | 1 1/8" | 0.065" | 0.995" | 650 psi @ 72° F | Yes | Soft | K | ASTM B88, NSF/ANSI 61 | 00000000 |
This Type L tubing has thicker walls than Type M tubing to handle higher pressures. It is also known as copper pipe. Tubing has good corrosion resistance and excellent heat transfer qualities. It is seamless, so it has a smooth interior for unrestricted flow. It meets NSF/ANSI 61 safety standards for use with drinking water systems.
Coiled tubing can be flared without splitting.
Note: Tube size is an accepted industry designation, not an actual size.
For technical drawings and 3-D models, click on a part number.
Tube Size | OD | Wall Thick. | ID | Max. Pressure | Temper Rating | Copper Tubing Type | Specifications Met | 60 ft. | 100 ft. | |
1/4 | 3/8" | 0.03" | 0.315" | 910 psi @ 72° F | Soft | L | ASTM B88, NSF/ANSI 61 | 00000000 | ||
3/8 | 1/2" | 0.035" | 0.43" | 770 psi @ 72° F | Soft | L | ASTM B88, NSF/ANSI 61 | 00000000 | ||
1/2 | 5/8" | 0.04" | 0.545" | 720 psi @ 72° F | Soft | L | ASTM B88, NSF/ANSI 61 | 00000000 | ||
5/8 | 3/4" | 0.042" | 0.666" | 630 psi @ 72° F | Soft | L | ASTM B88, NSF/ANSI 61 | 0000000 | ||
3/4 | 7/8" | 0.045" | 0.785" | 580 psi @ 72° F | Soft | L | ASTM B88, NSF/ANSI 61 | 00000000 | ||
1 | 1 1/8" | 0.05" | 1.025" | 490 psi @ 72° F | Soft | L | ASTM B88, NSF/ANSI 61 | 00000000 |
This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside. It is also known as refrigeration and air conditioning tubing. Tubing has good corrosion resistance and excellent heat transfer qualities. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.
Note: Tube size is an accepted industry designation, not an actual size.
For technical drawings and 3-D models, click on a part number.
Tube Size | OD | Wall Thick. | ID | Max. Pressure | Temper Rating | 50 ft. | 100 ft. | |
For Use With Natural Gas, Oil, R22 Refrigerant, Water | ||||||||
---|---|---|---|---|---|---|---|---|
__ | 1/8" | 0.03" | 0.065" | 3,000 psi @ 72° F | Soft | 000000 | ||
__ | 3/16" | 0.03" | 0.128" | 1,900 psi @ 72° F | Soft | 000000 | ||
1/8 | 1/4" | 0.03" | 0.19" | 1,400 psi @ 72° F | Soft | 0000000 | ||
__ | 5/16" | 0.032" | 0.248" | 1,100 psi @ 72° F | Soft | 0000000 | ||
1/4 | 3/8" | 0.032" | 0.311" | 980 psi @ 72° F | Soft | 0000000 | ||
3/8 | 1/2" | 0.032" | 0.436" | 720 psi @ 72° F | Soft | 0000000 | ||
1/2 | 5/8" | 0.035" | 0.555" | 610 psi @ 72° F | Soft | 0000000 | ||
5/8 | 3/4" | 0.035" | 0.68" | 510 psi @ 72° F | Soft | 0000000 | ||
3/4 | 7/8" | 0.045" | 0.785" | 580 psi @ 72° F | Soft | 0000000 | ||
1 | 1 1/8" | 0.05" | 1.025" | 490 psi @ 72° F | Soft | 0000000 | ||
1 1/4 | 1 3/8" | 0.055" | 1.265" | 430 psi @ 72° F | Soft | 0000000 | ||
1 1/2 | 1 5/8" | 0.06" | 1.505" | 400 psi @ 72° F | Soft | 0000000 |
Copper offers good corrosion resistance, and the polyethylene coating provides an additional protective layer. Tubing has markings to identify it as a gas line. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting. The tube OD dimension does not include the coating; you must remove the coating to attach fittings.
For technical drawings and 3-D models, click on a part number.
OD | Wall Thick. | ID | Max. Pressure | Form | Temper Rating | Color | 60 ft. | 100 ft. | |
3/8" | 0.03" | 0.315" | 910 psi @ 72° F | Coil | Soft | Yellow | 0000000 | ||
1/2" | 0.035" | 0.43" | 770 psi @ 72° F | Coil | Soft | Yellow | 0000000 | ||
5/8" | 0.04" | 0.545" | 720 psi @ 72° F | Coil | Soft | Yellow | 0000000 | ||
3/4" | 0.042" | 0.666" | 630 psi @ 72° F | Coil | Soft | Yellow | 0000000 | ||
7/8" | 0.045" | 0.785" | 580 psi @ 72° F | Coil | Soft | Yellow | 0000000 |
Copper offers good corrosion resistance, and the PVC coating provides an additional protective layer. The coating also meets UL 94V2 for flame retardance. Tubing is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting. The tube OD dimension does not include the coating; you must remove the coating to attach fittings.
For technical drawings and 3-D models, click on a part number.
The inside of this tubing is lined with 99% pure tin for added corrosion resistance. It is seamless, so it has a smooth interior for unrestricted flow.
For technical drawings and 3-D models, click on a part number.