These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.

Flexible enough for small bundles, these ties are often used for electronics.

The buckle allows you to cinch these ties tight.

Bundle cables outdoors with these ties that withstand exposure to UV rays and water.

The hook and loop on these ties holds more tightly than other hook and loop.

These ties stretch to hold material tightly without slipping.

Able to fit small bundles, these thin ties are more flexible than other ties.

Easily transport or hang cords, rope, and hose—these hook and loop cable ties include a handle.

Attach with a screw or other fastener.

Stick these ties to any smooth, clean surface.

Add a hook and loop cable tie to these mounts to secure a bundle.

The buckle allows you to cinch these ties tight.

Mount to a surface to secure and route cable.

Keep individual wires separate by laying them between the coils on these holders.

These ties are wide and flat for a no-slip grip.

Mount to a surface and add a cable tie to secure a bundle.

These mounts meet UL flammability requirements.

Use these plastic mounts with metal-detector-grade cable ties when detection and retrieval is essential, such as in food processing applications. Mounts are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Multiple tension settings ensure a precise fit around the bundle.

These ties are less likely to crack and break from dryness than regular cable ties.

The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.

Pull the tab to tear off these cable ties.

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

Bundle and secure cable, wire, and hose.

These cable ties come with a material certificate with traceable lot number and product shelf life.

Protect sensitive electronic equipment from static buildup.

These ties meet UL flammability requirements.

Identify bundles at a glance.

Attach these cable ties directly to a surface—no separate mount needed.

Keep an assortment of cable ties on hand.

These soft cable ties won’t damage delicate material. The ribs gently grip material while securely holding the tie.

These ties are less likely to crack and break from dryness than regular cable ties.

Mount to a surface and add a beaded cable tie to secure a bundle.

Create custom-length ties for bundling delicate materials.

Mount these ties where needed—a hard rubber coating and wire core helps them maintain their shape.

A hard rubber coating and wire core helps these ties maintain their shape.

Secure large bundles such as lumber, cardboard, and wire coils.

Bundle, close, and label bags and sacks.

For use in the harshest environments, these ties withstand chemicals and UV rays.

Use these mounts with stainless steel cable ties when working in corrosive environments.

Prevent metal cable ties from damaging cable with these cushions that cover the edges of a tie.

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Secure two pressurized hydraulic lines with a single clamp. Mount these clamps directly onto rails, no adhesive or welding required. They fit tightly around the lines to reduce vibration.

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

Organize multiple lines of pipe, tubing, or hose with a single clamp. They are polyethylene for good chemical and UV resistance.

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.

For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.

Quickly mount parallel lines of pipe, hose, or tubing by clicking them into these clamps. Made of acetal, they are UV-resistant and can be used outdoors.

Tighten the bolt for an exact fit around material. Clamps secure vertical pipes in sanitation drain applications and prevent them from coming in contact with the mounting surface.

These plastic rings won't conduct electricity. Also known as distribution rings, they have a large opening for routing multiple cables. A smooth surface prevents damage to wire and cable.

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

These hangers fit a range of material sizes. Push them closed to lock at the size you need. They provide a more secure hold on material than loop hangers.

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling.

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.