We will reply to your message within an hour.
Designed for indoor applications, these cords are often used to power appliances.
These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.
Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.
After a power failure, these cords must be manually reset, preventing unexpected equipment startup.
All cords have a country-specific plug to power equipment from international outlets.
Use these cords with computers, lab equipment, and office machines that have IEC connections.
All cords have a country-specific plug on one end and an IEC socket on the other end.
Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.
The shielding blocks signal interference from nearby equipment and devices.
Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.
Power multiple devices from one power source.
Plug these cords into fans that have quick-disconnect terminals.
These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.
Couple these adapters with a cord that matches your outlet and length requirements to run DC-powered electronics.
Plug these adapter cords into a standard outlet and they change AC voltage to DC voltage.
To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices.
Swap the plug to match the outlet of the region you’re in instead of using separate cords for each country. These adapter cords convert AC voltage to power DC electronics.
Power devices that require less than 120 volts AC.
Plug these cords into a vehicle socket to charge devices that run on AC voltage.
Plug these cords into computers, lab equipment, and office machines that have IEC connections.
Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other.
The insulation on these cords resists water, so they can be used outdoors.
The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.
Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.
Keep personnel safe from electric shock with these cords.
Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.
Designed for indoor use, these cords are often used to power appliances.
Power multiple devices with one extension cord.
In addition to an outlet on the end, these cords have multiple inline outlets.
These self-coiling cords return to their retracted length after stretching for tangle-free storage.
Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.
A locking lever on the female socket prevents your device from disconnecting.
Change the connection style between an outlet and your equipment.
Attach these splitters to an extension cord to power multiple devices from one cord.
Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.
Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.
Separately control each device plugged into these strips—each outlet has its own power switch.
The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.
Keep personnel safe from electric shock with ground fault protection.
An isolated ground connection on these outlets protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance.
A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.
Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.
With a rubber housing, these outlet strips withstand drops and other impact.
Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.
These curved outlet strips clamp onto a pole or table leg.
Install these extra-long strips onto the frame of an electrical cabinet.
Mount these strips into standard 19" wide electronics racks and enclosures.
Bring power to workstations that are not near a wall—these poles mount from the ceiling.
Power hydraulic and air-powered valves, motors, pumps, and pressure switches.
When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.
Play audio and 4K video from a single source on multiple displays. These HDMI splitters are handy for classrooms, conference rooms, factory floors, and trade shows.
The thermostat automatically turns these heaters on when the temperature drops below 38° F and turns them off when the temperature reaches 45° F.
Turn the dial to control the percentage of time that these heaters cycle on, from 5% to 100%. Commonly used to thaw pipes, prevent valves from freezing, and heat beakers and flasks in labs, they're good for temporary and occasional use where rapid heating is required but precise temperature control is not.
There’s no need for power-connection kits with these finished lengths of cable.
Rated for a maximum heat output of 900° F, these heaters are often used for thawing frozen pipes and rapid spot heating.
For demanding applications such as hot-melt transfer pipes, these heaters have a maximum heat output of 1400° F.
Before ice begins to form, install this constant-wattage heat cable on roofs and in gutters and downspouts to prevent damage caused by ice buildup.