Keep personnel safe from electric shock with ground fault protection.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

Create a tie down by attaching these hooks to elastic strap.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

This braided wire has a stiff construction for use as bracing and guy wires.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Flattened outer strands create a smooth surface area that spreads contact to reduce wear.

Create a choker loop around a supporting structure with the snap-hook end and use the loop to secure the suspended material.

Attach to a threaded anchor or hole for support and use the loop to secure the suspended material.

Attach the 90° eye to a surface for support and use the loop to secure the suspended material.

With a reinforced loop, also known as a thimble eye, installed on one end, quickly attach a hook or a shackle to a wire rope.

This steel wire rope includes a hook with latch on one end for use with winches.

The swivel hook with latch installed on one end, prevents the wire rope from twisting. It is for use with winches.

Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance.

Stronger than aluminum cord grips, these steel grips are zinc plated for corrosion resistance. They have a steel locknut and metal-reinforced O-ring that prevents liquid from entering the connection.

Pull one or more cables through conduit.

Pull wire and cable while maintaining tension until the line can be permanently anchored. Use these clamps with stranded bare steel wire and cable.

The loops tighten by the weight of your cable or by manual adjustment. These grips are often wrapped around a beam or pipe.

Remove the cap to connect a cord.