About Wire and Cable
More
Low-Voltage High-Temperature Wire
- Use for ovens and furnaces, panel and equipment (hook-up)
- Wire with FEP Plastic Insulation: Flexible
Wire with Silicone Rubber Insulation: Ultra Flexible - Temperature Range:
Wire with FEP Plastic Insulation: -239° to 390° F
Wire with Silicone Rubber Insulation: -100° to 400° F
Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It’s also known as hook-up wire.
Wire with FEP insulation is chemical resistant.
Wire with silicone rubber insulation is ultra-flexible for use in applications that require tight turns. It also withstands moisture.
Silver-plated wire is stronger and more corrosion resistant than bare wire.
For technical drawings and 3-D models, click on a part number.
| Wire Ga.  | Strand Count | Current | OD | Wire Material | Choose an Outer Insulation Color | 10 ft. | 25 ft. | 50 ft. | |
Stranded Wire with FEP Plastic Insulation | |||||||||
|---|---|---|---|---|---|---|---|---|---|
50V AC/50V DC | |||||||||
| 36 | 25/50 | 0.1 A @ 86° F | 0.01" | Silver-Plated Copper | 000000 | ||||
| 29 | 51/46 | 0.5 A @ 86° F | 0.02" | Silver-Plated Copper | 000000 | ||||
| 26 | 66/44 | 1 A @ 86° F | 0.02" | Silver-Plated Copper | 000000 | ||||
Stranded Wire with Silicone Rubber Insulation | |||||||||
50V AC/50V DC | |||||||||
| 36 | 25/50 | 0.1 A @ 86° F | 0.02" | Bare Copper | 000000 | ||||
| 29 | 51/46 | 0.5 A @ 86° F | 0.03" | Bare Copper | 000000 | ||||
| 26 | 66/44 | 1 A @ 86° F | 0.04" | Bare Copper | 000000 | ||||
Micro M12 Screw-Together Connectors
Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment. Their poles and keyways adhere to standard coding layouts, reducing the chance you’ll mismatch connectors.
A- and C-coded connectors send both power and signal, while K-, L-, S-, and T-coded connectors only send power. Choose A-coded connectors for AC and DC sensors, actuators, motors, light curtains, and other devices. They’re often used to connect equipment to IO Link controllers and within Profibus, DeviceNet, and other fieldbus systems. Connectors with a snap-on wire connection pierce the wire’s insulation, so you don’t need to strip it.IP67 and IP68 rated connectors can withstand brief submersion. Add caps to protect connectors and maintain their IP and NEMA ratings when not in use.
Note: Sockets and female receptacles may have extra holes on their face that are not used.
For technical drawings and 3-D models, click on a part number.
Housing Thread | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Poles | Coding | Face Dia. | Voltage | Current | For Wire Gauge | For Cable OD | Housing Material | Size | Pitch, mm | Type | Max. Temp., °F | Environmental Rating | Each | |
| 5 | A | 0.3" | 50V AC/50V DC | 4A | 22-20 | 0.19"-0.23" | Nylon Plastic | M12 | 1 | Metric | 185° | IP67 | 0000000 | 000000 |
Housing Thread | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Poles | Coding | Voltage | Current | Face Dia. | For Wire Gauge | For Cable OD | Housing Material | Size | Pitch, mm | Type | Max. Temp., °F | Environmental Rating | Each | |
| 5 | A | 50V AC/50V DC | 4A | 0.3" | 22-20 | 0.19"-0.23" | Nylon Plastic | M12 | 1 | Metric | 185° | IP67 | 0000000 | 000000 |
Shielded Micro M12 Screw-Together Connectors
Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads. The shielding on these connectors maintains signal integrity and minimizes signal loss between equipment. The threaded housing creates a secure connection that withstands the shaking and vibrating of industrial automation.
A-coded, these connectors are often used to connect equipment to IO Link controllers and devices within Profibus, DeviceNet, and other fieldbus systems. They work with both AC and DC devices such as sensors, motors, and light curtains. Poles and keyways on their face adhere to standard coding layouts to reduce the chance you’ll mismatch connections.
Snap-on connectors pierce your wire’s insulation, so you don’t need to strip it.
All meet IP ratings when either mated or capped. IP65 rated connectors seal out dust and water from low-pressure washdowns. IP67 rated connectors are protected from dust and temporary submersion.
Add caps to protect connectors and maintain their IP ratings when not in use.
Note: They may have extra holes on the face that are not used.
For technical drawings and 3-D models, click on a part number.
Housing Thread | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Poles | Coding | Face Dia. | Voltage | Current | For Wire Gauge | For Cable OD | Housing Material | Size | Pitch, mm | Type | Temp. Range, °F | Environmental Rating | Each | |
| 4 | A | 0.3" | 50V AC/50V DC | 4A | 24-22 | 0.18" - 0.35" | Nickel-Plated Brass | M12 | 1 | Metric | -40° to 185° | IP65, IP67 | 0000000 | 000000 |
| For Thread Size | Material | Each | |
For Sockets with Internal Threads | |||
|---|---|---|---|
| M12 | Anodized Aluminum | 0000000 | 000000 |
DMX Connectors
Replace damaged connectors on lighting cables that are commonly used for movie and stage lighting, as well as interior building lighting. They can also be used to make your cables longer. These connectors are compatible with equipment that have five-pin XLR connections. They lock together, so they won't accidentally unplug.
| Electrical Connector Component | Number of Poles | Voltage | Current | For Wire Gauge | For Cable OD | OD | Lg. | Housing Material | Temperature Range, °F | Features | Each | |
| Plug | 5 | 50V AC/50V DC | 7.5A | 18 | 0.14"-0.31" | 0.75" | 2.76" | Black Chrome-Plated Zinc | -20° to 175° | Strain Relief | 0000000 | 00000 |
| Socket | 5 | 50V AC/50V DC | 7.5A | 18 | 0.14"-0.31" | 0.75" | 2.89" | Black Chrome-Plated Zinc | -20° to 175° | Strain Relief | 0000000 | 0000 |