Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion and impact resistance.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

Cover sharp edges, corners, and weld seams with these thick epoxy coatings for protection against cuts and snags.

These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

Seal out moisture on scratched painted metal.

Made with flakes of 316 stainless steel, these flexible silicone coatings have excellent durability and corrosion resistance. They withstand temperatures up to 1200° F for use on boilers, stacks, piping, and similar indoor applications.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Use these dyes after anodizing and before sealing to add a decorative appearance.

Use these dyes at the end of your zinc-plating process to add a decorative appearance.

These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. Once removed, coatings can be melted again for repeat use.

Protect tools, dies, and other parts during shipping and storage with these durable, removable coatings. After peeling, they leave a greasy film for continued corrosion protection. Once removed, coatings can be melted again for repeat use.

Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.

These low-odor coatings form a waxy film similar to lube oil, so parts can remain coated for assembly. They can be removed with an alkaline cleaner.

Stick these adhesive-backed products inside electrical enclosures, tool boxes, and cabinets to coat metal components—they emit a corrosion-inhibiting vapor for up to two years.

These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.

These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

Coat knobs, handles, mirrors, and other objects with a micron-thin, decorative finish. 99.999% or 99.88% elementally pure, these metals vaporize when heated with low-voltage current inside a high-vacuum environment.

Able to withstand temperatures of up to 2500° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

Prep, paint, and seal small scratches on metal surfaces with these pens.

Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.

Match the manufacturers’ color of your lift, jack, or motor to cover scratches and wear. This paint resists oil, gas, heat, and sunlight for use in demanding environments.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.

These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.

Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings.

Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.

Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.

Restore rusted metal surfaces to their original state. These removers dissolve rust and prevent it from returning.

Use this thick gel to remove rust from vertical surfaces. Removers are acid free and are safe for contact with skin and sensitive surfaces, such as copper, brass, aluminum, and plastic.

Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.

Nano-sized additives penetrate small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. It's formulated to adhere to metal parts and to stay in place in wet environments.

For use in applications where acids, bases, oxidizers, and fuels are present.

Made with moisture-resistant thickeners, this grease stays in place in wet environments.

Formulated to resist most chemicals and solvents, this grease keeps bearings lubricated in harsh environments.

Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments.

Made with moisture-resistant aluminum thickener, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads. It is NSF registered H1 for incidental food contact.

Prevent parts from locking or corroding together even when exposed to wet environments—these lubricants stay in place in the presence of water.

Thick to cling to wet surfaces, these corrosion-resistant lubricants won’t wash off of chain or other moving metal parts in wet environments. They withstand heavy loads, cut through dirt, grease, and rust, and protect metal surfaces.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Apply to electrical connections such as switches and lugs to prevent corrosion, enhance conductivity, and suppress arcing. These inhibitors protect and lubricate the connection while sealing out liquids and gases.

Form a protective barrier that makes surfaces impregnable to corrosion-causing acid fumes.

Shield iron, steel, stainless steel and tin from corrosion.

These sleeves contain a corrosion inhibitor to shield metal parts from corrosion.

Screw this dispenser to the top of most 8-oz. and 1-lb. brush-top antiseize lubricant cans. It has a trigger and a brush-tip nozzle that allow neat and easy one-hand dispensing.

Prevent rust on parts and stored steel media.