How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Supported 45° Flared Fittings for Copper and Brass Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water
- Temperature Range: -65° to 250° F
- Tubing: Use with seamless brass and copper
- Specifications Met:
Metric: SAE J512, SAE J513, UL Listed
All other fittings: SAE J512, UL Listed; except tee connectors for 1/2" tube OD
The flared end nests inside the fitting body, providing extra support to the tubing. Fittings are also known as inverted 45° flared fittings, refrigeration fittings, and SAE fittings. To assemble, place the nut (sold separately) on the tubing, flare the end of the tubing, then insert the tubing into the fitting and tighten the nut. Fittings are brass for good corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Material | Max. Pressure | Each | |
NPTF Threads | ||||||
| 1/2" | 0.032" | 1/2 | 360 Brass | 700 psi @ 72° F | 00000000 | 000000 |
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Material | Max. Pressure | Each | |
NPTF Threads | ||||||
| 1/2" | 0.032" | 3/8 | 360 Brass | 700 psi @ 72° F | 00000000 | 000000 |
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Material | Max. Pressure | Each | |
NPTF Threads | ||||||
| 1/2" | 0.032" | 1/2 | 360 Brass | 700 psi @ 72° F | 00000000 | 000000 |
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Max. Pressure | Each | |
| 1/2" | 0.032" | 360 Brass | 700 psi @ 72° F | 00000000 | 000000 |
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | Each | |
| 1/2" | 0.032" | 360 Brass | 700 psi @ 72° F | 00000000 | 000000 |
Nuts for Supported 45° Flared Fittings for Copper and Brass Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water
- Temperature Range: -65° to 250° F
- Tubing: Use with seamless brass and copper
- Specifications Met: SAE J512, UL Listed
Use these nuts with supported 45° flared fittings to create a tight metal-to-metal seal on flared copper and brass tubing. They are brass for good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For Tube | |||||
|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | Each | |
| 1/2" | 0.032" | 360 Brass | 700 psi @ 72° F | 00000000 | 000000 |