When space is at a premium choose these compact fittings.

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

When space in your pipe line is limited, choose these miniature fittings that are one inch or less in length.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Metal hose fittings have better durability than plastic barbed hose fittings.

Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets.

Use these couplings at pressures up to 7,200 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with International Standard ISO Minimal-Spill-shape plugs and sockets.

Also known as live swivels, these fittings swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system. Use in high-pressure applications up to 5,000 psi.

These two-piece fittings screw directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose. Use in high-pressure hydraulic applications up to 5,800 psi.

These CGA adapters allow you to connect a hose to a propane torch.

Sets contain a crimping tool and a variety of CGA fittings, nuts, and ferrules so you can connect pressure regulators, torches, and other components of your welding system.

These nuts attach to high-pressure nipples for compressed gas so you can connect your tank to the inlet of a pressure regulator.

Each hose is a different color so you can differentiate your lines.

No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.

The flared end of the fitting nests inside the fitting body, providing extra support to the tubing. Fittings are also known as inverted 45° flared fittings.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

Individually bagged to prevent contamination, these fittings are suitable for applications that require a high level of cleanliness.

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Made of brass, these fittings have good corrosion resistance.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Made of plastic, these couplings are lighter in weight than metal quick-turn couplings.

Made of stainless steel, these couplings stand up to wet environments.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Monitor flow with these clear fittings.

Aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.

Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.

A built-in tube support slips inside the tubing to prevent collapsing and provides a sturdy connection for an extra-tight seal.

Also known as luer lock couplings, these connect with a half turn so you can easily connect and disconnect your line. With no latch, they have a low-profile design that works well in small spaces. Use in low-pressure applications up to 45 psi.

Fittings have a barb that grips onto tubing. Use in applications up to 120 psi.

Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage.