A safety catch prevents accidental opening.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

These latches are typically used to secure hoods and covers.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

No need for a strike plate, these latches hook into a lip or notch.

Each latch comes with a variety of strike plates for different mounting options.

To prevent accidental opening, these latches have a safety catch.

To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Draw lightweight surfaces together with these latches.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

Secure surfaces together with these padlockable latches; built-in compression springs withstand vibration better than other latches.

Each latch comes with a variety of strike plates for different mounting options.

Adjust the latching distance to compensate for gasketing and misalignment.

Open several draw locks with the same key.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

Retract the nose by pulling the knob.

Thread onto machinery or attach a knob or handle to the threaded spindle.

Use the lanyard as a tether to secure the spring plunger to machinery and prevent accidental drops.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.

A smooth ball handle is easy to grip and won't catch on other parts.