Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

For use when thickness will be less than 2", sand mixes consist of cement and sand.

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.

These crack fillers come in an easy-to-pour jug for filling cracks in asphalt up to 1/2” wide.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Seal leaks around fasteners with a protruding head.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Use these two-part fillers to rebuild cracked or worn plastic surfaces.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.

These knives have a sturdy blade for scraping paint and debris and for applying and smoothing joint and spackling compounds.

Also known as mud pans, use these to mix small amounts of drywall compound or to bring it to your work area.

Thicker than taping knives, trowels can apply and spread large amounts of drywall compound quickly.

A thin, flexible blade makes easy work of smoothing and feathering drywall compound.

Spread and level asphalt.

Rub these tools along the mortar between bricks for a uniform, finished appearance.

Drag these brooms along hardening concrete to create a rough surface for traction in slippery environments.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Also known as mortar hoes, the blade on these tools has holes to allow concrete to pass through as you mix.

Stakes provide a firm anchor for concrete form boards.

These long, thin brushes have semi-soft bristles to smooth out wrinkles and air bubbles after wall coverings are applied without damaging the wall covering itself.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Also known as Plaster of Paris, these fillers conceal small cracks, nail holes, and blemishes. Mix with water.

Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.

Also known as drywall mud, these joint compounds are ready to use. Apply with drywall tape over seams for a finished appearance.

Spray these compounds onto drywall to create an orange-peel texture that covers stains, patches, and chips. The nozzle adjusts from a light to heavy spray.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Waterproof and strong, these surface fillers remain flexible when repairing rips, tears, and holes in neoprene rubber. They're often used on wetsuits.

Press these putty-like fillers into cracks in wood up to 1/8" wide.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

The textured finish matches concrete surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.

Make temporary waterproof seals that peel off when no longer needed.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Also known as neutral cure, this sealant won't discolor copper, brass, plastic, and concrete.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.

Power without a cord means you can take these sealant-dispensing guns wherever you need them.

Dispense sealants packaged in sausage packs.

Immerse the nozzle in the sealant and pull back the rod to fill.