A plastic cover insulates the barrel to prevent short-circuiting with nearby wire.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting from nearby wire. These terminals have an elongated ring that can be mounted with a range of screw sizes.

For easy crimping, lay wire into the open barrel instead of threading it through a closed barrel.

With a heat-resistant PVDF cover on the barrel, these terminals are best for high-temperature applications where you want to prevent short-circuiting with nearby wire.

When heat is applied, the enclosed solder melts, creating the most secure and electrically conductive connection we offer. The plastic insulation also shrinks when heated, forming a seal to keep out water and contaminants.

With a thicker ring and a plastic cover on the barrel, these terminals are more durable than standard ring terminals and insulated to prevent short circuiting with nearby wire.

A serrated edge on the inside of the ring grips the mounting screw for a secure hold.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. They slide together and pull apart with ease, so they are convenient for applications that require frequent connections.

Convenient for applications that require frequent connections, these terminals slide together and pull apart with ease. They are noninsulated, so you can easily inspect the wire connection.

Heat these terminals to shrink the insulation, creating a seal that keeps out water and contaminants. The insulation covers the barrel to prevent short circuiting with nearby wires. Convenient for applications that require frequent connections, these terminals slide together and pull apart with ease.

When heat is applied, the enclosed solder melts, creating the most secure and electrically conductive connection we offer. The insulation also shrinks when heated, forming a seal to keep out water and contaminants.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

A male tab piggybacked onto these female terminals lets you connect two wires to a single quick-disconnect terminal. They are noninsulated, so you can easily inspect the wire connection.

A plastic cover on the barrel of these terminals provides electrical insulation to prevent short-circuiting with nearby wire. Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

When heat is applied, the insulation on these terminals shrinks and creates a seal that keeps out water and contaminants. Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. These wire ferrules add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

A plastic cover insulates the barrel to prevent short-circuiting with nearby wire.

The connection on these terminals is completely covered with insulation when mated, leaving no metal exposed and preventing short-circuiting with nearby wire. Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

When heat is applied, the insulation shrinks and creates a seal that keeps out water and contaminants. Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. These terminals are a hybrid of ring and spade terminals; they install without removing the mounting screw, yet resist being pulled off.

Connect two female quick-disconnects.

Use a compression tool to attach lugs to wire. Mount them to a screw.

Drill mounting holes on these lugs where you need them. With a long barrel, you can compress them twice for an extra-tight grip in high-vibration applications.

Accommodate differently spaced screws when connecting to equipment rails or bus bars with the slotted mounting hole on these lugs. With a long barrel, you can compress them twice for an extra-tight grip in high-vibration applications.

A plastic cover fully insulates these splices.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

Visually confirm your connection through the inspection window.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

Check to make sure you’ve made a secure connection between two different sizes of wire with the inspection window on these splices. When heated, their adhesive-lined insulation shrinks and bonds to wires, creating a water- and corrosion-resistant seal.

For use with a compression tool, these splices are color-coded to match compression dies.

Compress the barrel twice on each end for an extra-tight grip in high-vibration applications.

Snap these splices onto your wire and they’ll pierce the insulation without you having to strip it.

A plastic cover fully insulates these splices and is clear so you can visually confirm the connection.

Create a secure connection that resists corrosion and water.

Connect one wire to two wires of the same size. When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Connect a tap wire to a main wire without stripping—these wire taps penetrate insulation.

Tap a wire or add a finished terminal to the end of a wire.