They may look like normal pliers, but these tools have a built-in crimping die.

The insulated handles on these crimpers protect against shock from accidental contact with live electrical circuits.

Dies snap in and out of this tool, so you can quickly change from crimping one electrical connector type to another.

Crimp pin-and-sleeve contacts in connectors.

The ratchet applies the correct pressure to ensure a complete four-point crimp every time to adhere to strict MIL-C-22520/1 standards.

The ratchet on these tools applies the right amount of pressure to make sure the crimp is complete every time. Since you insert the wire ferrule from the front, they're useful in tight spaces.

Insert wire ferrules from the front to crimp in tight spots.

The ratchet applies the correct pressure to ensure a complete crimp every time.

The rotating dies in these crimpers are coded to match battery cable and terminals, making it easier to select the correct die.

No dies to buy or change—this tool has settings you adjust for different compression connector sizes.

Strip wire and crimp connectors with one tool.

The ratchet applies the correct pressure to ensure a complete crimp every time.

The ratchet applies the correct pressure to ensure a complete crimp every time.

The elongated nose on this tool reaches into tight spaces.

Crimp insulation-piercing connectors, commonly referred to as IDC connectors, onto flat ribbon cable.

Compress sleeves with more force than hydraulic hand tools.

These compression sleeves are designed to meet lifting specifications.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

Protect sensitive equipment from electromagnetic interference.

Use an Ethernet cable crimper to terminate these plugs.

Push these connectors together for secure Ethernet connections that are quick and easy to connect and disconnect with just one hand. You’ll know when the plug and socket are locked in place when you hear a click.

Use these connectors and cords to make Ethernet connections in wet location environments.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. Use them with standard Molex connectors.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. They fit AMP MATE-N-LOK connectors.

Configure a connector for your application by combining housings with pins and sleeves for different wire sizes. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Make secure connections with machine tools, robots, and other equipment that vibrates frequently and carries currents as high as 300 amps.

Configure a connector for your application—combine inserts for power and signal with a base and a hood.

The smallest latching connectors we offer, these fit in tight spaces. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

Crimpers are furnished with five removable dies that crimp air and water hose.

Use a hammer strike or a vise to crimp ferrules onto your hose and secure barbed hose fittings.

These clamps are easier to install than worm-drive clamps—crimp the pinch points with pinch-clamp pincers for a secure hold. They are also known as ear clamps.

Unlike other pinch clamps, these have a unique tongue-and-groove design that creates a gap-free seal to reduce leaks.

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

This optional tool offers a quick and easy way to connect large quantities of barbed fittings to push-on hose. Use the built-in cutter to squarely cut push-on hose without fraying. Then, clamp the hose into the tool’s vise and apply light pressure on the handle to drive into the fitting.

Use these tools with a crimping ring (sold separately) to connect barbed tube fittings for drinking water to tubing.

Capable of securing 15 straps per minute, these mobile tensioners/sealers save you time and energy.

Crimp on a seal with these tools to hold plastic strapping tight. They have different levers for tensioning and sealing.

These tensioners apply extreme tension on plastic strapping to hold it tight around packages. They hold the bottom strap and tension the top strap by winding it around a take-up wheel.

Also known as crimpers, sealers secure seals onto metal strapping.

Use these tensioners to draw metal strapping tight around packages.

These tools have five blades and compound-leverage action for more power with less effort than other crimpers.

The jaws have V-notches in 1/4" increments to measure the depth of bends.

Rounded jaws reduce damage to aluminum and other lightweight metal.

Create a raised edge in sheet metal that locks into the rolled edge of another piece.

Open sheet metal seams without cutting. The jaws slide under seams to pry the sheets apart.