Manual Combination Tensioner/Crimp-Tight Sealers for Plastic Strapping
These tools do double duty, pulling plastic strapping tight and then fastening it with a seal (sold separately). They have multiple levers for tensioning and sealing.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
Sealers for Plastic Strapping
For Strapping Group No. | For Seal Type | For Strapping Wd. | For Strapping Thick. | For Use With | Handle Lg. | Each | |
11 | Smooth | 1/2" | 0.010"-0.027" | Embossed Polypropylene Strapping | 13" | 00000000 | 000000 |
11 | Smooth | 1/2" | 0.010"-0.027" | Embossed Polypropylene Strapping | 17" | 00000000 | 00000 |
12 | Smooth | 1/2" | 0.015"-0.031" | Embossed Polypropylene Strapping | 17" | 00000000 | 000000 |
13 | Smooth | 5/8" | 0.010"-0.027" | Embossed Polypropylene Strapping | 17" | 00000000 | 00000 |
14 | Serrated | 1/2" | 0.015"-0.040" | Smooth Polyester Strapping | 17" | 00000000 | 000000 |
15, 16 | Serrated | 5/8" | 0.020"-0.050" | Smooth Polyester Strapping | 17" | 00000000 | 000000 |
17 | Serrated | 3/4" | 0.020"-0.050" | Smooth Polyester Strapping | 17" | 00000000 | 000000 |
17 | Smooth | 3/4" | 0.015"-0.040" | Embossed Polypropylene Strapping | 17" | 00000000 | 000000 |
High-Tension Tensioners for Plastic Strapping
These tensioners apply extreme tension on plastic strapping to hold it tight around packages. They hold the bottom strap and tension the top strap by winding it around a take-up wheel. They have a built-in cutter for removing excess strapping.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Features | Each | ||
A | 11, 12, 13, 16, 17 | 1/2"-3/4" | 0.020"-0.035" | Embossed Polypropylene Strapping, Smooth Polypropylene Strapping | Built-In Cutter | 00000000 | 000000 |
B | 11, 12, 13, 14, 15, 16, 17, 18, 19 | 1/2"-3/4" | 0.015"-0.050" | Embossed Polypropylene Strapping, Smooth Polyester Strapping, Bonded Polyester Strapping, Woven Polyester Strapping, Basket Weave Polyester Strapping, Smooth Polypropylene Strapping | Built-In Cutter | 000000000 | 000000 |
C | 13, 15, 16, 17, 18, 19, 20 | 5/8"-1 1/4" | 0.025"-0.050" | Embossed Polypropylene Strapping, Smooth Polyester Strapping, Bonded Polyester Strapping, Woven Polyester Strapping, Basket Weave Polyester Strapping | Built-In Cutter | 00000000 | 000000 |
Tensioners for Plastic Strapping
Use these tensioners with buckles in low-tension applications to draw plastic strapping tight around packages.
Style A tensioner lets you tighten strapping while threading plastic or wire buckles. It has a built-in cutter for removing excess strapping. Style B tensioner uses leverage to pull strapping tight.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
Sealers for Metal Strapping
Also known as crimpers, these sealers secure seals (sold separately) onto metal strapping.
Sealers for open seals cut two notches on each side of the seal with one operation. Sealers for closed seals cut a single notch on each side of the seal with one operation. For best results, apply two notches per seal.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Each | ||
For Open Seals | ||||||
---|---|---|---|---|---|---|
A | 1 | 3/8" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 0000000 |
A | 2, 3 | 1/2" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
A | 4, 5 | 5/8" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
A | 6, 7 | 3/4" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
B | 3 | 1/2" | 0.023"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
B | 5 | 5/8" | 0.023"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
B | 7, 8 | 3/4" | 0.023"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
C | 8 | 3/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
C | 9 | 1 1/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
For Closed Seals | ||||||
A | 1 | 3/8" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 000000000 | 000000 |
A | 2, 3 | 1/2" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 000000000 | 000000 |
A | 4, 5 | 5/8" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 000000000 | 000000 |
A | 6, 7 | 3/4" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 000000000 | 000000 |
C | 8 | 3/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
C | 9 | 1 1/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
High-Tension Tensioners for Metal Strapping
These tensioners apply maximum tension to pull strapping more tightly around packages than standard tensioners for metal strapping. They work on irregular surfaces as well as rounded objects. Place the seal on one end and fold strapping back to form a hook, and then slide the other end of the strapping through the seal. Tensioners push against the seal as they tighten strapping, creating high tension without slip. Pull strapping tight manually before applying tension.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
Style | For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Each | |
For Closed Seals | ||||||
---|---|---|---|---|---|---|
A | 5, 7, 8, 9 | 5/8"-1 1/4" | 0.023"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 0000000 |
B | 1, 2, 3, 4, 5, 6, 7, 21, 22 | 3/8"-3/4" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
Tensioners for Metal Strapping
Use these tensioners to draw metal strapping tight around packages. They have ratchet action for unlimited take-up. The tensioner holds the bottom strap while a feedwheel bites into the strap and tightens it.
Tensioners for open seals are for use on flat surfaces. Strapping is wrapped around the package and overlapped on top. Tensioners for closed seals are for use on irregular surfaces as well as rounded objects. Place the seal on one end and fold strapping back to form a hook, and then slide the other end of the strapping through the seal. Tensioners push against the seal as they tighten strapping.
Note: To match with compatible metal strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
Tensioners | Replacement Feedwheels | Replacement Ratchet Gears | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Each | Each | Each | ||||
For Open Seals | ||||||||||
A | 1, 2, 3, 4, 5, 6, 7 | 3/8"-3/4" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 |
A | 8, 9 | 3/4"-1 1/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
For Closed Seals | ||||||||||
B | 1, 2, 3, 4, 5, 6, 7 | 3/8"-3/4" | 0.015"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
B | 5, 7, 8, 9 | 5/8"-1 1/4" | 0.023"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Combination Tensioner/Sealers for Metal Strapping
These tools do double duty, pulling metal strapping tight and then fastening it, without the use of a separate seal. They create a joint by crimping interlocking notches into the strapping and cutting off the excess.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Each | |
2, 3 | 1/2" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 0000000 |
4, 5 | 5/8" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
6, 7 | 3/4" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
High-Force Sheet Metal Crimpers
This tool has five blades and compound-leverage action for more power with less effort than other crimpers. Use it to join pieces of metal duct and gutters. Jaws have V-notches in 1/4" increments to measure the depth of bends.
Throat Dp. | Notch Increments | Jaw Wd. | Lg. | Material | Each | |
1 1/4" | 1/4", 1/2", 3/4", 1", 1 1/4" | 7/8" | 9 3/4" | Steel | 0000000 | 000000 |
Depth-Measuring Sheet Metal Benders and Crimpers
The jaws have V-notches in 1/4" increments to measure the depth of bends.
Throat Dp. | Notch Increments | Jaw Wd. | Lg. | Material | Each | |
1 1/4" | 1/4", 1/2", 3/4", 1", 1 1/4" | 3 1/4" | 8" | Steel | 0000000 | 000000 |
Depth-Measuring Sheet Metal Benders and Crimpers for Tight Spaces
Offset handles allow you to use this tool in tight spaces. The jaws have V-notches in 1/4" increments to measure the depth of bends.
Throat Dp. | Notch Increments | Jaw Wd. | Lg. | Material | Each | |
1 1/4" | 1/4", 1/2", 3/4", 1", 1 1/4" | 3 1/4" | 9" | Steel | 0000000 | 000000 |
Tear-Preventing Sheet Metal Benders and Crimpers
Rounded jaws reduce damage to aluminum and other lightweight metal.
Throat Dp. | Jaw Wd. | Lg. | Material | Each | |
1" | 3 1/2" | 8" | Steel | 0000000 | 000000 |
Tight-Grip Sheet Metal Benders and Crimpers
These tools lock onto your material to prevent them from opening while bending and crimping.
Throat Dp. | Jaw Wd. | Lg. | Material | Each | |
1 3/4" | 3 1/8" | 8" | Steel | 0000000 | 000000 |
Sheet Metal Edge Shapers
Make different edge styles on your sheet metal. It comes with rollers for turning, wiring, burring, beading, and crimping.
Roller | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Throat Dp. | Ht. | Wd. | Dp. | For Max. Steel Thick. | Mount Type | Max. Mounting Surface Thick. | Material | Ctr.-to-Ctr. | Material | Includes | Each | |
7" | 35" | 15 3/8" | 21 1/8" | 1/64" | C-Clamp | 2 3/4" | Steel | 2" | Cast Iron | Rollers for Burring, Crimping, Wiring, 1/8" Turning, and 3/4" Ogee Bending | 0000000 | 000000000 |
Hand-Held Sheet Metal Benders for Opening Seams
Open sheet metal seams without cutting. The jaws slide under seams to pry the sheets apart. Because you’ve unfolded the sheet metal instead of cutting it, you can reuse both panels.
Jaw Wd. | Lg. | Material | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | ||||
---|---|---|---|---|
1 1/4" | 10" | Steel | 0000000 | 0000000 |
Hand-Held Sheet Metal Benders for Long Folds
Create long, uniform folds on the edges of sheet metal. Insert the end of a sheet into either side of these tools to form 3/8" or 1" deep folds.
Hand-Held Sheet Metal Benders for Making Corners
Fold corners in flat metal sheets to create your own bin boxes, drip pans, and other three-dimensional objects. Similar to tucking the corners of a bedsheet, these benders twist and wrap the metal into triangle-shaped folds to form corners. Finish the fold by creasing it with a regular hand-held sheet metal bender.
Style A benders have a longer throat depth for making deeper corners. They create corners in any angle.
Style B benders form precise 45° or 90° corners. They have a finger hole for additional gripping options.