Length Length |
|---|
Body Diameter Body Diameter |
|---|
|
|
For Maximum Material Thickness For MaximumMaterial Thickness |
|---|
|
|
For Minimum Material Thickness For MinimumMaterial Thickness |
|---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Drill Bit Decimal Size Equivalent Drill Bit DecimalSize Equivalent |
|---|
|
|
Drive Style Drive Style |
|---|
 |  |
| Slotted | External Hex |
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
About Thumb Screw and Binding Post Materials
More
About Nuts, Materials, and Finishes
More
Sealing Screw-to-Install Rivet Nuts
A coated flange seals out moisture and offers corrosion resistance. Large slits in the body allow these rivet nuts to collapse and flare when you fasten them with a screw. They have a backside flange that distributes force to resist pull-through in thin metals. For quicker installation, use a rivet nut tool. Length is measured from under the flange.
For technical drawings and 3-D models, click on a part number.
Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Dia. | Thick. | No. of Folding Sides | Seal Material | Pkg. Qty. | Pkg. | |
Steel | ||||||||||||
| 1/4"-20 | 7/16" | 0.016" to0.188" | Bulbed | 0.472" | 0.732" | 0.63" | 0.073" | 4 | Acrylic Plastic | 10 | 000000000 | 00000 |
Screw-to-Install Rivet Nuts
These rivet nuts are zinc plated for mild corrosion resistance. They're also known as jack nuts. Large slits in the body allow these rivet nuts to collapse and flare when you fasten them with a screw. A backside flange distributes the force to resist pull-through in thin metals. For quicker installation, use a rivet nut tool. Length is measured from under the flange.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Dia. | Thick. | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
| 6-32 | 21/64" | 0.016" to 0.188" | Bulbed | 0.335" | 0.661" | 0.48" | 0.063" | 4 | 25 | 000000000 | 00000 |
| 6-32 | 5/16" | 0.188" to 0.375" | Bulbed | 0.335" | 0.866" | 0.488" | 0.073" | 4 | 25 | 000000000 | 0000 |
| 10-24 | 3/8" | 0.016" to 0.188" | Bulbed | 0.38" | 0.716" | 0.531" | 0.073" | 3 | 25 | 000000000 | 00000 |
| 10-24 | 3/8" | 0.188" to 0.375" | Bulbed | 0.38" | 0.888" | 0.531" | 0.073" | 3 | 25 | 000000000 | 00000 |
| 1/4"-20 | 7/16" | 0.016" to 0.188" | Bulbed | 0.492" | 0.732" | 0.63" | 0.063" | 4 | 25 | 000000000 | 00000 |
| 1/4"-20 | 7/16" | 0.188" to 0.375" | Bulbed | 0.472" | 0.902" | 0.63" | 0.073" | 4 | 25 | 000000000 | 00000 |
Thread | Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Length, mm | Dia., mm | Thick., mm | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||||
| M5 | 0.8 | 10 mm | 0 to 5 | Bulbed | 10.5 | 18.4 | 14 | 1.6 | 3 | 25 | 000000000 | 000000 |
| M5 | 0.8 | 10 mm | 5 to 10 | Bulbed | 10.5 | 23.2 | 14 | 1.6 | 3 | 25 | 000000000 | 00000 |
| M6 | 1 | 12 mm | 0 to 5 | Bulbed | 12.5 | 18.6 | 16 | 1.6 | 3 | 25 | 000000000 | 00000 |
| M6 | 1 | 12 mm | 5 to 10 | Bulbed | 12.5 | 22.9 | 16 | 1.6 | 3 | 25 | 000000000 | 00000 |
Scratch-Resistant Screw-to-Install Rivet Nuts
A PVC coating minimizes scratches to the surface of your material and makes these rivet nuts more corrosion resistant than zinc-plated steel rivet nuts. Large slits in the body allow these rivet nuts to collapse and flare when you fasten them with a screw. A backside flange distributes the force to resist pull-through in thin metals. For quicker installation, use a rivet nut tool. Length is measured from under the flange.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Dia. | Thick. | No. of Folding Sides | Pkg. Qty. | Pkg. | |
PVC Plastic-Coated Steel | |||||||||||
| 1/4"-20 | 7/16" | 0.188" to 0.375" | Bulbed | 0.472" | 0.902" | 0.63" | 0.073" | 4 | 10 | 000000000 | 000000 |
Rivet Nuts for Plastic and Composites
Once installed these rivet nuts have a large back flange that distributes the load across a broad area for a strong hold in plastic and composites. Install them in a drilled hole with a wrench- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | ||||||||||||
| 10-24 | R | 0.020" to 0.175" | Bulbed | 0.33" | 0.828" | 0.410" | 0.518" | 0.77" | 4 | 10 | 000000000 | 00000 |
| 10-32 | R | 0.020" to 0.175" | Bulbed | 0.33" | 0.828" | 0.410" | 0.510" | 0.038" | 4 | 10 | 000000000 | 0000 |
| 10-32 | R | 0.175" to 0.320" | Bulbed | 0.33" | 0.921" | 0.410" | 0.510" | 0.038" | 4 | 10 | 000000000 | 00000 |
| 1/4"-20 | X | 0.020" to 0.280" | Bulbed | 0.38" | 1.000" | 0.505" | 0.645" | 0.059" | 4 | 10 | 000000000 | 0000 |
| 1/4"-20 | X | 0.280" to 0.500" | Bulbed | 0.38" | 1.234" | 0.505" | 0.645" | 0.059" | 4 | 5 | 000000000 | 0000 |
| 5/16"-18 | 1/2" | 0.020" to 0.280" | Bulbed | 0.5" | 1.141" | 0.570" | 0.770" | 0.062" | 4 | 5 | 000000000 | 0000 |
| 5/16"-18 | 1/2" | 0.280" to 0.500" | Bulbed | 0.5" | 1.375" | 0.570" | 0.770" | 0.062" | 4 | 5 | 000000000 | 0000 |
Thread | Body | Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Material Thick., mm | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick., mm | No. of Folding Sides | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate-Plated Steel | |||||||||||||
| M5 | 0.8 | R | 0.5 to 4.5 | Bulbed | 8.4 | 21 | 10.0 | 13 | 1 | 4 | 10 | 000000000 | 00000 |
| M5 | 0.8 | R | 4.5 to 8.1 | Bulbed | 8.4 | 23.8 | 10.0 | 13 | 1 | 4 | 10 | 000000000 | 0000 |
| M6 | 1 | 10 mm | 0.5 to 7.1 | Bulbed | 9.7 | 25.4 | 12.8 | 16.4 | 1.5 | 4 | 10 | 000000000 | 0000 |
| M8 | 1.25 | 1/2" | 0.5 to 7.1 | Bulbed | 12.6 | 29 | 14.5 | 19.7 | 1.6 | 4 | 5 | 000000000 | 0000 |
Dowel Nuts for Wood
Use with screws for wood joints to create a strong joint in a blind hole.
For technical drawings and 3-D models, click on a part number.
| Lg. | Body Dia. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||
|---|---|---|---|---|
10-24 | ||||
| 1/2" | 0.393" | 25 | 000000000 | 000000 |
1/4"-20 | ||||
| 0.472" | 0.394" | 25 | 000000000 | 00000 |
| 0.591" | 0.394" | 25 | 000000000 | 00000 |
| 0.63" | 0.394" | 25 | 000000000 | 00000 |
| 0.787" | 0.394" | 25 | 000000000 | 00000 |
| 1.181" | 0.394" | 25 | 000000000 | 00000 |
5/16"-18 | ||||
| 0.472" | 0.472" | 10 | 000000000 | 0000 |
| 0.63" | 0.472" | 25 | 000000000 | 00000 |
| 0.787" | 0.472" | 5 | 000000000 | 0000 |
| 1 1/8" | 0.622" | 5 | 000000000 | 0000 |
3/8"-16 | ||||
| 1" | 5/8" | 5 | 000000000 | 00000 |
Recessed Joint Clamps for Wood
Install in a cutout to create a secure joint between boards, butcher blocks, and countertops. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Plate | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Head Type | For Material Thick. | For Hole Dia. | For Hole Dp. | Lg. | Thread Lg. | Head Wd. | Head Ht. | Adjustment Range | Lg. | Wd. | Thick. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||||||
1/4"-20 | ||||||||||||||
| Hex | 1/2" to 3" | __ | __ | 3 1/2" | 3" | 7/16" | 3/16" | __ | 1 1/4" | 7/16" | 0.188" | 10 | 000000000 | 000000 |
| Hex | 1/2" to 3 1/2" | __ | __ | 4" | 3 1/2" | 7/16" | 5/32" | __ | 1 1/4" | 7/16" | 0.156" | 10 | 000000000 | 00000 |
| Headless | 3/4" to 1 1/2" | 7/8" | 5/8" | 4 1/16" | 2" | __ | __ | 2" to 3 1/2" | __ | __ | __ | 25 | 0000000 | 000000 |