Project a bright, vivid reference point to hang light fixtures, align workbenches, or even guide your machine vision camera. These lasers are small enough to fit on virtually any machine.

Cross-hair lasers project a central reference point, as well as vertical and horizontal lines, so you don't have to reposition the laser when aligning in multiple directions. They are commonly used to position shafts, bearings, and couplings.

Red lasers are best viewed indoors and at short distances. Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.

DC lasers can be hardwired to programmable logic controllers (PLCs) and timer relays, so you can automate when they turn on and off. For lasers with a barrel connector, you must cut off the connector to hardwire them. Magnetic mounts (sold separately) attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.

Project two intersecting lines to ensure equipment is level and plumb. Set these leveling lasers on any surface and they'll level themselves within about 4°. They’re often used to align bench tops in shops and labs.

Red lasers are dimmer than green lasers, so they’re best viewed indoors. Use the included tripod to position them up to 46” high.

Green lasers appear up to 10 times brighter than red lasers, so they can be used from farther distances and in brightly lit areas, including outdoors. Use the included magnetic target to make your laser beam easier to see from a distance. They have a magnetic base and can be affixed to flat surfaces when mounting holes are not available. Add a tripod to adjust the height of these lasers between 16" and 51".

No need to reposition these lasers as you work around your room—crosshairs on every surface give you all the reference points you need. They are a good choice for level, plumb, and square applications, such as aligning doors and windows on multiple walls. If you set them on a surface, they level themselves within about 4° and indicate when they are out of level. You can turn this function off when you want to make sure your crosshair is level with something other than the Earth.

Secure them to a tripod using the threaded mount or use the strong magnetic base to attach them to equipment. They come with a magnetic target, which you can mount in your space to reflect the laser beam to increase its visibility in dim conditions and at far distances.