Crush Shim Washers | McMaster-Carr

	ID ID

	OD OD

	Thickness Thickness

	Material Material

Brass

Copper

Aluminum

	Minimum Hardness Minimum Hardness

Rockwell B60

Not Rated

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	Specifications Met Specifications Met

158 Products

Ring Shims

Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims.

For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.

Aluminum shims are lightweight and nonmagnetic. They have good corrosion resistance.

Brass and copper shims are corrosion resistant and nonmagnetic. Copper shims are good conductors of heat and electricity, so these shims are often used when installing heat sinks.

For technical drawings and 3-D models, click on a part number.

1100 Aluminum

0.005" Thick. (-0.0005" to 0.0005" Tolerance)
ID	ID Tolerance	OD	OD Tolerance	Material	Min. Hardness	Pkg. Qty.		Pkg.
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	1100 Aluminum	Not Rated	10	000000000	000000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	1100 Aluminum	Not Rated	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	1100 Aluminum	Not Rated	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	1100 Aluminum	Not Rated	5	000000000	00000
0.01" Thick. (-0.001" to 0.001" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	1100 Aluminum	Not Rated	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	1100 Aluminum	Not Rated	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	1100 Aluminum	Not Rated	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	1100 Aluminum	Not Rated	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	1100 Aluminum	Not Rated	5	000000000	00000

5052 Aluminum

0.005" Thick. (-0.0005" to 0.0005" Tolerance)
ID	ID Tolerance	OD	OD Tolerance	Material	Min. Hardness	Pkg. Qty.		Pkg.
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
0.01" Thick. (-0.001" to 0.001" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	0000
0.016" Thick. (-0.0015" to 0.0015" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	0000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
0.02" Thick. (-0.002" to 0.002" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	0000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
0.032" Thick. (-0.0025" to 0.0025" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	0000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
0.063" Thick. (-0.0035" to 0.0035" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	0000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	0000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	0000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	0000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	0000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	5052 Aluminum	Not Rated	10	000000000	00000
1/8" Thick. (-0.007" to 0.007" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	5	000000000	0000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	5052 Aluminum	Not Rated	5	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	5052 Aluminum	Not Rated	5	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	5052 Aluminum	Not Rated	5	000000000	00000

260-360 Brass

0.002" Thick. (-0.0006" to 0.0006" Tolerance)
ID	ID Tolerance	OD	OD Tolerance	Material	Min. Hardness	Specifications Met	Pkg. Qty.		Pkg.
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
0.005" Thick. (-0.0008" to 0.0008" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	0000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	0000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	0000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
7/8"	0" to 0.011"	1 3/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1 1/4"	0" to 0.011"	1 3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
0.01" Thick. (-0.0013" to 0.0013" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	0000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
7/8"	0" to 0.011"	1 3/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1 1/4"	0" to 0.011"	1 3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
0.016" Thick. (-0.0025" to 0.0025" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	5	000000000	00000
0.02" Thick. (-0.003" to 0.003" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	0000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	0000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	0000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
7/8"	0" to 0.011"	1 3/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1 1/4"	0" to 0.011"	1 3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
0.025" Thick. (-0.003" to 0.003" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
0.032" Thick. (-0.0035" to 0.0035" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	0000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
7/8"	0" to 0.011"	1 3/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1 1/4"	0" to 0.011"	1 3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
0.045" Thick. (-0.004" to 0.004" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	5	000000000	00000
0.063" Thick. (-0.005" to 0.005" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	5	000000000	00000
0.09" Thick. (-0.006" to 0.006" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	5	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	5	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	1	000000000	00000
1/8" Thick. (-0.006" to 0.006" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	5	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	5	000000000	00000
7/8"	0" to 0.011"	1 3/8"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	5	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	1	000000000	0000
1 1/4"	0" to 0.011"	1 3/4"	-0.002" to 0.002"	260-360 Brass	Rockwell B60	ASTM B36	1	000000000	0000

110 Copper

0.005" Thick. (-0.0005" to 0.0005" Tolerance)
ID	ID Tolerance	OD	OD Tolerance	Material	Min. Hardness	Specifications Met	Pkg. Qty.		Pkg.
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	000000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
0.01" Thick. (-0.0008" to 0.0008" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	0000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
0.016" Thick. (-0.001" to 0.001" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
0.021" Thick. (-0.002" to 0.002" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
0.032" Thick. (-0.003" to 0.003" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
0.045" Thick. (-0.005" to 0.005" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
0.064" Thick. (-0.005" to 0.005" Tolerance)
1/4"	0" to 0.011"	3/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	0000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	1	000000000	0000
0.09" Thick. (-0.008" to 0.008" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
1/8" Thick. (-0.008" to 0.008" Tolerance)
3/8"	0" to 0.011"	5/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
1/2"	0" to 0.011"	3/4"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	10	000000000	00000
5/8"	0" to 0.011"	1"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
3/4"	0" to 0.011"	1 1/8"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000
1"	0" to 0.011"	1 1/2"	-0.002" to 0.002"	110 Copper	Not Rated	ASTM B152	5	000000000	00000