Pipe Size Pipe Size |
|---|
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
|
|
Check Valve Type Check Valve Type |
|---|
|
Shape Shape |
|---|
 | Straight |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Shank Type Shank Type |
|---|
|
Finish Finish |
|---|
|
Weight Weight |
|---|
|
About Oil Fittings and Oil Cups
More
Vacuum Cup Levelers
Also known as spring plungers, these fittings are spring-loaded to accommodate items with variable heights. Tighten the mounting nuts to secure the leveler in a panel or bracket.
For technical drawings and 3-D models, click on a part number.
Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Lg. | Overall Lg. | Lg. | Dia. | For Max. Panel Thick. | Thread Size | Pipe Size | Thread Type | Gender | Material | Wt. | Each | |
| 3/8" | 2" | 29/32" | 5/16" | 0.7" | M5 | __ | Metric | Male × Female | Nickel-Plated Brass | 0.05 lbs. / 0.02 kg | 0000000 | 000000 |
| 1/2" | 3 3/8" | 1 31/32" | 1/2" | 1.6" | M8 | 1/8 | Metric × BSPT | Male × Female | Nickel-Plated Brass | 0.18 lbs. / 0.08 kg | 0000000 | 00000 |
| 7/8" | 3 1/2" | 1 31/32" | 1/2" | 1.6" | M8 | 1/8 | Metric × BSPT | Male × Female | Nickel-Plated Brass | 0.18 lbs. / 0.08 kg | 0000000 | 00000 |
| 7/8" | 3 1/2" | 2" | 5/16" | 1.8" | M5 | __ | Metric | Male × Female | Nickel-Plated Brass | 0.08 lbs. / 0.04 kg | 000000 | 00000 |
Oil Fittings
Zinc-plated brass fittings have good corrosion resistance. Nickel-plated brass fittings are more corrosion resistant than zinc-plated brass fittings.
Fitting with a check valve prevents oil from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants. Fittings with a self-closing hinged cover block contaminants from entering equipment.
UNF and UNEF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.
Note: Fittings do not hold oil; any oil dispensed into the fittings passes into the part to be lubricated.
Each | |||||||
|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
1/4"-32 Male UNEF Threads | |||||||
| Zinc-Plated Brass | 7/16" | 7/32" | 7/32" | 3/8" | 000000 | 00000 | 00000 |
Each | |||||||
|---|---|---|---|---|---|---|---|
| Material | Overall Ht. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
M5 × 0.8 mm Male Metric Threads | |||||||
| Nickel-Plated Brass | 15mm | 4mm | 4mm | 16mm | 0000000 | 000000 | 000000 |
M6 × 1 mm Male Metric Threads | |||||||
| Nickel-Plated Brass | 15mm | 5mm | 5mm | 19mm | 0000000 | 00000 | 00000 |
M8 × 1.25 mm Male Metric Threads | |||||||
| Nickel-Plated Brass | 16.5mm | 5mm | 5mm | 19mm | 0000000 | 00000 | 0000 |
Remote-Access Grease Fittings
Access difficult-to-reach lubrications points from up to 10 ft. away. The fitting is brass, which is corrosion resistant. An integral check valve prevents grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Tube | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Type | Pipe Size | Gender | Material | Fitting Material | Material | Lg., ft. | Bend Radius | Check Valve Type | For NLGI Viscosity Grade | Temp. Range, °F | 1-5 | 6-Up | |
| NPT | 1/8 | Male | Brass | Brass | Polyethylene Plastic | 10 | 2 1/2" | Ball | 0, 00, 1, 2, 3, 4 | -10° to 180° | 0000000 | 000000 | 000000 |