Scoop, stir, and pour with these sturdy metal ladles.

Styles A and B are plain, unfinished steel. These heavy duty ladles are often used in foundries.

For technical drawings and 3-D models, click on a part number.

Equipped with a flowmeter/totalizer, this dispenser displays both flow rate and cumulative flow volume of the oil dispensed. Mount it to your drum of oil. It's smaller and more portable than air-powered container-mount dispensers, making it good for refilling gear boxes and transmissions. The container is not included.

These manual dispensers are more portable than air-powered dispensers.

Style A mounts to a 5-gal. pail of oil (not included).

Quickly lubricate bearings—these packers force out the old grease and replace it with your new grease.

Bench-mount packer connects to your grease gun's nozzle. For larger bearing applications, mount directly to your workbench.

For technical drawings and 3-D models, click on a part number.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers. Use it with your pail of grease. Container not included.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing. Dispensers include a follower plate that moves down the inside of the container as the grease level drops to compress the grease and prevent vapor pockets.

Styles A and C do not include a container. Use them with your pail of grease.

Dispense from your drum or pail of grease using compressed air. Dispensers include a follower plate that moves down the inside of the container as the grease level drops to compress the grease and prevent vapor pockets. Containers not included.

Dispensers deliver grease at the same pressure as your existing grease system, up to the max. grease outlet pressure. Dispensers with a booster gun allow you to increase the pressure to the value listed for max. grease outlet pressure with booster.

Styles A-D have a Z-swivel that connects the outlet hose to the gun and prevents the hose from kinking.

For technical drawings and 3-D models, click on a part number.

Hinged-lid baskets have a hole to secure with a wire tie or other fastener.

Organize bottles of various shapes and sizes.

Screw mount holders fasten to the wall with screws.

Holders for bottles up to 3 3/4" dia. hold water bottles, spray bottles, and aerosol cans.

Style F are designed to hold either round or rectangular one-gallon jugs.

Style G can accommodate bottles of various shapes and sizes.

Zinc and zinc-plated steel fittings have mild corrosion resistance. Fittings with a self-closing hinged cover block contaminants from entering equipment.

UNF and UNEF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.

Note: Fittings do not hold oil; any oil dispensed into the fittings passes into the part to be lubricated.