The vinyl coating on these curtains withstands oil.

Cut with scissors to create custom curtains—they have grommets and are ready to hang. A vinyl coating provides oil resistance.

Hinges allow you to fold these panels into the desired configuration and the clear panels let workers see and be seen.

Lightweight and flexible enough to roll up and carry, these panels are wire reinforced so they stand on their own. A vinyl coating provides oil resistance.

Combine straight and curved sections to build a hanging one- to four-sided curtain partition.

Shield workers while allowing them to see and be seen.

You can see and walk through these strip curtains.

Shield workers while allowing them to see and be seen.

Hinges allow you to fold these panels into the desired configuration while the clear screens let workers see and be seen.

Provide excellent chemical resistance with these silica cloth curtains.

The aluminum on one side of these curtains reflects radiant heat.

Prevent heat and flame damage in small spaces—these pads are a good alternative to large blankets during localized, high-heat applications.

The holes are already punched in these strips for convenient installation.

These strips are ribbed to hide scratches and wear; cut them to length with shears or a utility knife and punch holes for hanging.

Often hung in freezers, these strips can be used in food-service environments.

Completely block light with these strip rolls. Cut them to the length you need and punch holes for hanging.

Able to handle temperatures up to 500° F, these door strips can be used near ovens and furnaces.

Hang these strips near data centers and other areas where static build-up could harm sensitive electronics.

Cut these partially light-blocking strips to the length you need and punch holes for hanging.

Create custom doors that allow vehicles and people to move freely, while keeping heated or cooled air in and dirt, dust, and debris out.

To hide scratches and wear, these doors have ribbed strips.

Completely block light to maintain darkness and privacy, while allowing traffic to flow freely.

To minimize strain on your door strips, these plates have a hinge that swings when personnel or vehicles pass through.

Sized for use in coolers, offices, and other locations with limited clearance above doorways.

These curtains generate a stream of warm air to maintain inside temperatures when doors are open in cold weather.

These manual screens are spring-loaded to assist in the raising and lowering the screen.

Use curtains to separate warm and cool-air areas and to create a dust barrier, while still allowing light to pass through.

Transmit a beam of light up to 225 ft. from the transmitter to the receiver.

These blowers create an extra-wide field of ionized air.

Spread the range of static control further than static eliminators without fan.

These sheets can be grounded to reduce static electricity.

Pores allow for air circulation, so these sheets are often used in drying applications.

This abrasion-resistant fabric sheds molten metal spatter when placed at an incline of 15° or greater. Use as a welding curtain.

Often used to create curtains and screens, this fabric has an aluminum foil backing that deflects radiant heat.

Similar to plaster, these adhesive-impregnated sheets and strips become moldable when water is added and harden as they dry. They can be used in sealing, insulating, and covering applications.

A blend of aramid and fiberglass, this fabric resists mildew and abrasion. It is self-extinguishing and won't melt, so it's often used for insulation applications.

More flexible than standard silica fabric, wrap these sheets and strips to insulate pipes, wires, and hose. This fabric also protects against welding spatter.

Even when exposed for as long as 2 minutes to temperatures up to 2600° F, these sheets won't ignite or melt.

The neoprene coating on these nylon sheets resists UV rays as well as solvents and oil.

Saturated with wax, these sheets also have a polyester coating on one side to resist corrosion and moisture. Protect piping and wrap irregularly shaped objects with this very flexible fabric.

Cover walls in audio/visual rooms and create backdrops.

Set up these free-standing partitions to reflect sound and block noise from traveling to other parts of your facility. A vinyl barrier is sandwiched between two vinyl-coated fiberglass absorbers.

Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.

Create a sheet of high-velocity air.

Use one bracket for 3" to 18" wide air knives; two brackets for 24" to 42" wide air knives, and three brackets for 48" wide air knives.

Dry and cool parts, wipe conveyor belts, control coating depth, and blow liquid, chips, and dust off of equipment in sanitary environments.

These produce the same airflow as standard static-eliminating air knives but are quieter and use 15% less compressed air.