Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in aluminum, iron, stainless steel, and steel.

Switch between cutting and deburring aluminum, iron, stainless steel, and steel without the need to change your wheel.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.

Made of a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel.

Two layers of fiberglass mesh reinforcement give these wheels at least three times the life of standard cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.

Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.

For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels.

An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.

Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels.

These wheels are reinforced with fiberglass mesh and designed to last longer than standard wheels when cutting ductile cast iron.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete.

These wheels have a zirconia alumina abrasive for cutting ductile cast iron.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete.

These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron.

A ceramic alumina abrasive cuts through stainless steel.

Made of diamond abrasive, these wheels cut ceramics, tile, and other abrasive materials.

These steel wheels have a diamond grit edge for making cuts in abrasive materials such as ceramic and tile.

The edge of the blade is segmented to cut faster than a continuous edge.

A continuous edge on these blades produces smooth cuts. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete.

The edge of the blade is segmented to cut faster than a continuous edge.

Also known as dado-head blades, these are for cutting grooves in all types of wood.

Use these blades for occasional cutting.

Use these blades with water or coolant to produce smoother cuts in tile than dry-cutting blades. They're also for use on glass.

Make clean cuts in rubber and plastic hose with the scalloped knife edge on these blades.

Produce smooth cuts in plastic materials including polycarbonate, polyurethane, PVC, and acrylic with the carbide-tipped teeth on this blade.

Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing.

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide.

Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing.

Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron.

Also known as rip blades, these steel blades have large, forward-angled, carbide-tipped teeth for making fast cuts.

Use these blades for occasional cutting.

The edge of the blade is segmented to cut faster than a continuous edge.

The edge of the blade is segmented to cut faster than a continuous edge.

A blend of tungsten carbide and diamond grits on the continuous edge of this blade cuts hard, nonmetallic materials including composites and graphite.

A razor-sharp knife edge minimizes dust and makes quick, clean cuts through foam sheets such as expanded polystyrene insulation and extruded polystyrene.

A tungsten carbide grit edge cuts through abrasive materials such as composites and fiberglass.

The segmented edge on these blades is coated with diamond grit for cutting plastic.

Use these titanium carbonitride (TiCN) coated blades on stainless steel.

The blade edge is coated in diamond grit.