Bench Grinder Cutoff Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
1/16" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 000000 |
1/16" | 5/8" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 00000 |
3/32" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 00000 |
3/32" | 5/8" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 0000 |
7/64" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 00000 |
Bench Grinder Cutoff Wheels for Carbide, Ceramics, and Glass
These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | Grit | Each | |
10" Dia. | |||||||||
0.05" | 1 1/4" | 6,100 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 0000000 |
Bench and Surface Grinder Cutoff Wheels for Hard Metal
Made with boron nitride, second only in hardness to diamond, these wheels are highly wear resistant, so they easily cut steel with a Rockwell hardness of C50 or greater, including alloy steel, A2, D2, and T15 tool steel. While these wheels are not as hard as wheels made with diamond, they dissipate heat better.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | For Use On | Grit | Each | |
10" Dia. | ||||||||||
3/64" | 1 1/4" | 3,625 | Type 1 | Straight | Boron Nitride | Steel | Inconel, Hastelloy, Tool Steel | 100 | 0000000 | 0000000 |
Bench-Top Cutoff Saw Wheels for Metal
Wheels are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Maximum Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
3/32" | 5/8" | 6,100 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 000000 |
3/32" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 00000 |
Floor-Mount Cutoff Saw Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
1/8" | 1" | 6,110 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
Long-Life Floor-Mount Cutoff Saw Wheels for Metal
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
3/32" | 5/8" | 6,110 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |
Cutoff Wheels for Metallurgical Testing
Create the nearly polished finish required for testing metal with these non-reinforced aluminum oxide wheels. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | For Hardness | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive Material | For Use On | Grit | Each | |
10" Dia. | ||||||||||
0.063" | Rockwell C30-C40 | 1 1/4" | 3,500 | Type 1 | Straight | Aluminum Oxide | Iron, Stainless Steel, Steel | 90 | 0000000 | 000000 |
0.063" | Rockwell C40-C55 | 1 1/4" | 3,500 | Type 1 | Straight | Aluminum Oxide | Iron, Stainless Steel, Steel | 100 | 0000000 | 00000 |
0.063" | Rockwell C55-C68 | 1 1/4" | 3,500 | Type 1 | Straight | Aluminum Oxide | Stainless Steel, Steel | 100 | 0000000 | 00000 |
Circular Saw Blades for Plastic
Produce smooth cuts in plastic materials including polycarbonate, polyurethane, PVC, and acrylic with the carbide-tipped teeth on this blade. Sharpen it if it becomes dull.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Each | |
10" Dia. | |||||||||
5/8" | Round | 84 | 0.098" | 6,000 | 5° | Carbide-Tipped Steel | Steel | 0000000 | 000000 |
Miter, Chop, and Table Saw Blades for Glass and Fiberglass
The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass. Blades come with a reducer bushing to adjust the arbor diameter.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Edge Style | Includes | Each | |
Coarse Grit | ||||||||||
10" Dia. | ||||||||||
5/8", 3/4" | Round | 0.138" | 4,600 | Carbide | Steel | Dry | Segmented | Reducer Bushing | 0000000 | 0000000 |
Fast-Cut Miter and Chop Saw Blades for Masonry and Stone
The edge of the blade is segmented to cut faster than a continuous edge. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
10" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.08" | 6,100 | Diamond | Steel | Dry, Wet | 0.4" | Segmented | Reducer Bushing | 0000000 | 000000 |
Smooth-Cut Miter and Chop Saw Blades for Masonry and Stone
A continuous diamond-grit edge on these blades produces smooth cuts in hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. Remove the center piece to use the diamond-shaped arbor.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
10" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.09" | 6,100 | Diamond | Steel | Dry, Wet | 0.4" | Continuous | Reducer Bushing | 0000000 | 000000 |
Smooth-Cut Long-Life Miter and Chop Saw Blades for Masonry and Stone
A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
10" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.09" | 6,100 | Diamond | Steel | Dry, Wet | 0.4" | Continuous | Reducer Bushing | 0000000 | 0000000 |
Fast-Cut Long-Life Miter and Chop Saw Blades for Masonry and Stone
The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
10" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.09" | 6,100 | Diamond | Steel | Dry, Wet | 0.4" | Segmented | Reducer Bushing | 0000000 | 0000000 |
Wet-Cutting Miter, Chop, and Table Saw Blades for Tile
Use with water or coolant (not included) to produce smoother cuts in stone and ceramic tile than dry-cutting blades. They're also for use on glass. They have a continuous edge coated in diamond grit.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Each | |
10" Dia. | ||||||||||
5/8" | Round | 0.06" | 6,115 | Diamond | Steel | Wet | 0.2" | Continuous | 0000000 | 000000 |
Dry-Cutting Miter, Chop, and Table Saw Blades for Tile
A continuous edge coated in diamond grit makes fast, smooth cuts in stone and ceramic tile.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Each | |
10" Dia. | ||||||||||
5/8" | Round | 0.06" | 6,115 | Diamond | Steel | Dry | 0.2" | Continuous | 0000000 | 000000 |
Miter and Chop Saw Blades for Rubber and Reinforced Hose
Make clean cuts in rubber and plastic hose with the scalloped knife edge on these blades.
For technical drawings and 3-D models, click on a part number.
Miter, Chop, and Table Saw Blades for Composites and Graphite
A blend of tungsten carbide and diamond grits on the continuous edge of this blade cuts hard, nonmetallic materials including composites and graphite. Use dry or with water or coolant (not included).
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Edge Style | Each | |
10" Dia. | |||||||||
1" | Round | 0.125" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 00000000 | 0000000 |
Miter, Chop, and Table Saw Blades for Wood
Cut wood, plywood, and particleboard. Choose blades with more teeth for cutting across the grain; choose blades with fewer teeth for cutting with the grain (ripping). Blades with a narrower width of cut make faster cuts with less material loss.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Each | |
10" Dia. | ||||||||||
5/8" | Round | 24 | 0.098" | 6,000 | 15° | Carbide | Steel | Across Grain, With Grain (Rip Cut) | 00000000 | 000000 |
5/8" | Round | 40 | 0.094" | 7,000 | 15° | Carbide | Steel | Across Grain, With Grain (Rip Cut) | 0000000 | 00000 |
5/8" | Round | 40 | 0.095" | 7,000 | 20° | Carbide | Steel | Across Grain, With Grain (Rip Cut) | 0000000 | 00000 |
5/8" | Round | 60 | 0.098" | 6,000 | 15° | Carbide | Steel | Across Grain, With Grain (Rip Cut) | 00000000 | 00000 |
5/8" | Round | 80 | 0.098" | 6,000 | 15° | Carbide | Steel | Across Grain | 00000000 | 00000 |
Nonstick Smooth-Cut Miter, Chop, and Table Saw Blades for Wood
These blades have a heat-resistant coating to prevent material buildup. They have a large number of teeth to produce a smooth cut. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.
Smooth-Cut Miter, Chop, and Table Saw Blades for Wood
The large number of teeth on these blades produces a smooth cut across the wood grain. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.
Groove-Cutting Miter, Chop, and Table Saw Blades for Wood
Also known as dado-head blades, these are for cutting grooves across the grain and with the grain (ripping) in all types of wood.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Includes | Each | |
10" Dia. | |||||||||||
1" | Round | 32 | 0.25"-0.906" | 7,000 | -12° | Carbide | Carbide | Across Grain, With Grain (Rip Cut) | Two Cutting Blades, Removable Chip-Clearing Blades, Shims, Plastic Case | 0000000 | 0000000 |
Light-Use Miter, Chop, and Table Saw Blades for Wood
Use these blades for occasional cutting. Choose blades with more teeth for cutting across the grain; choose blades with fewer teeth for cutting with the grain (ripping).
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Each | |
10" Dia. | ||||||||||
5/8" | Round | 180 | 0.094" | 5,900 | 2° | Steel | Steel | Across Grain, With Grain (Rip Cut) | 0000000 | 000000 |
Miter, Chop, and Table Saw Blades for Plastic
Produce smooth cuts in plastic materials including polycarbonate, polyurethane, PVC, and acrylic with the carbide-tipped teeth on these blades. Sharpen them if they become dull. Choose blades with more teeth for thin, brittle plastic; choose blades with fewer teeth for thicker, softer plastic. Blades with a narrower width of cut make faster cuts with less material loss.
Miter and Chop Saw Blades for Steel
Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades. The blade with multiple arbor diameters comes with a reducer bushing. Choose blades with more teeth for a smoother cut.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Includes | Each | |
10" Dia. | ||||||||||
5/8" | Round | 52 | 0.091" | 5,200 | 0° | Carbide-Tipped Steel | Steel | __ | 0000000 | 0000000 |
5/8", 1" | Round | 52 | 0.078" | 5,200 | 0° | Carbide-Tipped Steel | Steel | Reducer Bushing | 0000000 | 00000 |
1" | Round | 60 | 0.094" | 1,900 | 0° | Carbide-Tipped Steel | Steel | __ | 0000000 | 000000 |
Miter and Chop Saw Blades for Copper, Brass, and Bronze
Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.
Miter and Chop Saw Blades for Stainless Steel
Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide. Blades with a narrower width of cut make faster cuts with less material loss.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Each | |
10" Dia. | |||||||||
1" | Round | 66 | 0.078" | 3,000 | 10° | Carbide | Steel | 0000000 | 0000000 |
Miter and Chop Saw Blades for Aluminum
Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing. Blades with a narrower width of cut make faster cuts with less material loss.
For technical drawings and 3-D models, click on a part number.
Cold Saw Blades for Steel and Cast Iron
Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance when cutting through steel and cast iron bars, rods, pipe, and tubing. Choose blades with more teeth for a smoother cut.
For technical drawings and 3-D models, click on a part number.
Cold Saw Blades for Stainless Steel
Use these titanium carbonitride (TiCN) coated blades on stainless steel bars, rods, pipe, and tubing. Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance. Choose blades with more teeth for a smoother cut.
For technical drawings and 3-D models, click on a part number.