Fast-Cut Bench-Top Cutoff Saw Wheels for Metal
These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
16" Dia. | ||||||||||
3/32" | 1" | 3,820 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
Bench-Top Cutoff Saw Wheels for Thin Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
16" Dia. | ||||||||||
7/64" | 1" | 3,820 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 000000 |
Bench-Top Cutoff Saw Wheels for Stainless Steel
Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels. They’re reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
16" Dia. | |||||||||
3/32" | 1" | 3,700 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | 60 | 0000000 | 000000 |
Floor-Mount Cutoff Saw Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
16" Dia. | ||||||||||
5/32" | 1" | 3,820 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
Long-Life Floor-Mount Cutoff Saw Wheels for Metal
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
16" Dia. | ||||||||||
5/32" | 1" | 3,820 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |
Portable Cutoff Saw Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
16" Dia. | |||||||||
1/8" | 1" | 4,700 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 36 | 0000000 | 000000 |
Portable Cutoff Saw Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
16" Dia. | ||||||||||
1/8" | 1" | 4,700 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |
Portable Cutoff Saw Wheels for I-Beams/Rails
Use these wheels to cut through metal such as iron and steel. They are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
16" Dia. | ||||||||||
1/8" | 1" | 4,800 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Iron, Steel | 60 | 0000000 | 000000 |
Portable Cutoff Saw Wheels for Ductile Cast Iron
These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron. They are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
16" Dia. | |||||||||
1/8" | 1" | 4,800 | Type 1 | Straight | Aluminum Oxide/Silicon Carbide Blend | Fiberglass Mesh | 24 | 0000000 | 000000 |
Fast-Cut Miter, Chop, and Table Saw Blades for Wood
Also known as rip blades, these steel blades have large, forward-angled, carbide-tipped teeth for making fast cuts with the wood grain (ripping).
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Each | |
16" Dia. | ||||||||||
1" | Round | 36 | 0.117" | 4,000 | 20° | Carbide-Tipped Steel | Steel | With Grain (Rip Cut) | 0000000 | 0000000 |
Nonstick Smooth-Cut Miter, Chop, and Table Saw Blades for Wood
These blades have a heat-resistant coating to prevent material buildup. They have a large number of teeth to produce a smooth cut. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Each | |
16" Dia. | ||||||||||
1" | Round | 80 | 0.157" | 4,000 | 10° | Steel | Steel | Across Grain, With Grain (Rip Cut) | 0000000 | 0000000 |
Long-Life Dry-Cutting Blades for Walk-Behind Flat Saws
These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer. Use them with low horsepower (under 20 hp) walk-behind flat saws. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Diamond Depth | Cutting Application | For Use On | Includes | Each | |
16" Dia. | |||||||||||
20 mm, 1" | Round | 0.125" | 4,800 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 0000000 |
Dry-Cutting Blades for Walk-Behind Flat Saws
Use these blades with low horsepower (under 20 hp) walk-behind flat saws. Blades come with a reducer bushing to adjust the arbor diameter. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Abrasive | Body | Max. Speed, rpm | Diamond Depth | For Use On | Includes | Each | |
16" Dia. | ||||||||||
20 mm, 1" | Round | 0.125" | Diamond | Steel | 4,800 | 0.35" | Concrete | Reducer Bushing | 0000000 | 0000000 |
Wet-Cutting Blades for Walk-Behind Flat Saws
Use these blades with water or coolant (not included) to produce a smooth cut and minimize heat buildup. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Diamond Depth | For Use On | Includes | Each | |
16" Dia. | ||||||||||
20 mm, 1" | Round | 0.125" | 3,820 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 0000000 | 0000000 |