Floor-Mount Cutoff Saw Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
18" Dia. | ||||||||||
| 3/16" | 1" | 3,395 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
Long-Life Dry-Cutting Blades for Walk-Behind Flat Saws
These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer. Use them with low horsepower (under 20 hp) walk-behind flat saws. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.
Wet-Cutting Blades for Walk-Behind Flat Saws
Use these blades with water or coolant (not included) to produce a smooth cut and minimize heat buildup. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.