Diameter Diameter | Show |
---|
|
Diameter Diameter | Hide |
---|
Arbor Hole Arbor Hole |
---|
|
For Use On For Use On |
---|
For Use With For Use With |
---|
|
Maximum Speed Maximum Speed |
---|
|
Abrasive Material Abrasive Material |
---|
|
Wheel Shape Wheel Shape |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Reinforcement Material Reinforcement Material |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Edge Style Edge Style |
---|
|
Cut Type Cut Type |
---|
![]() | ![]() |
Across Grain | With Grain (Rip Cut) |
Fast-Cut Straight Grinder Cutoff Wheels for Metal


Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel. Wheels are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | ||||||||||
0.045" | 3/8" | 14,200 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 00000 |
0.045" | 5/8" | 14,200 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
0.045" | 7/8" | 14,200 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
Extra-Long-Life Straight Grinder Cutoff Wheels for Metal


These high-density ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | ||||||||||
0.045" | 3/8" | 14,200 | Type 1 | Straight | Ceramic Alumina/Ceramic Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 00000 |
0.045" | 5/8" | 14,200 | Type 1 | Straight | Ceramic Alumina/Ceramic Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 0000 |
0.045" | 7/8" | 14,200 | Type 1 | Straight | Ceramic Alumina/Ceramic Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 0000 |
Straight Grinder Cutoff Wheels for Stainless Steel


For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels. They’re reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
6" Dia. | |||||||||
0.045" | 7/8" | 14,200 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 00000 |
Angle Grinder Cutoff Wheels for Metal


Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | ||||||||||
0.04" | 7/8" | 10,000 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 00000000 | 00000 |
0.045" | 7/8" | 10,000 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
0.045" | 7/8" | 10,185 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 0000 |
3/32" | 7/8" | 10,185 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 46 | 00000000 | 0000 |
Flush-Cut Angle Grinder Cutoff Wheels for Metal


Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in aluminum, iron, stainless steel, and steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Arbor Hole Thread Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | |||||||||||
0.045" | 7/8" | __ | 10,185 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 00000 |
0.045" | 7/8" | __ | 10,200 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
3/32" | __ | 5/8"-11 | 10,000 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 0000 |
3/32" | 7/8" | __ | 10,000 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 0000 |
1/8" | 7/8" | __ | 10,200 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 0000 |
Angle Grinder Cutoff Wheels for Cutting and Deburring Metal


Switch between cutting and deburring aluminum, iron, stainless steel, and steel without the need to change your wheel. Three layers of fiberglass mesh reinforce these aluminum oxide wheels. They're also known as Type 27, raised-hub, and depressed-center cutoff wheels, and they outperform Type 1 wheels when making flush cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | ||||||||||
5/64" | 7/8" | 10,200 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 00000000 | 000000 |
Flush-Cut Angle Grinder Cutoff Wheels for Stainless Steel


Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make fast, burr-free cuts in stainless steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Angle Grinder Cutoff Wheels for Stainless Steel


Make fast, burr-free cuts in stainless steel with these ceramic and zirconia alumina wheels. They’re reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Contaminant-Free Angle Grinder Cutoff Wheels for Stainless Steel


Prevent corrosion and discoloration on stainless steel—these wheels contain less than 0.1% iron, chloride, and sulfur contaminants. They have an aluminum oxide grit and are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Flush-Cut Contaminant-Free Angle Grinder Cutoff Wheels for Stainless Steel


Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They contain less than 0.1% iron, chloride, and sulfur contaminants, so they won't corrode or discolor stainless steel. Wheels are aluminum oxide abrasive that is reinforced with two layers of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
6" Dia. | |||||||||
0.045" | 7/8" | 10,200 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | 60 | 00000000 | 000000 |
Flush-Cut Angle Grinder Cutoff Wheels for Aluminum, Brass, and Copper


Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make quick cuts in soft metal such as aluminum, brass and copper without clogging. Wheels are reinforced with two layers of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Angle Grinder Cutoff Wheels for Aluminum, Brass, and Copper


Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Angle Grinder Cutoff Wheels for Hard Metal


Made of a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel. Wheels are reinforced with two layers of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | ||||||||||
1/16" | 7/8" | 10,185 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 46 | 0000000 | 00000 |
Bench Grinder Cutoff Wheels for Metal


Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Choose a Grit | Each | |
6" Dia. | ||||||||||
0.035" | 1/2" | 10,100 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 00000 |
0.035" | 5/8" | 10,185 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 0000 |
0.04" | 7/8" | 10,185 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 0000 |
1/16" | 1/2" | 10,185 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 0000 |
1/16" | 5/8" | 10,185 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 000000000 | 0000 |
Smooth-Cut Bench Grinder Cutoff Wheels for Metal


An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | ||||||||||
1/16" | 1 1/4" | 9,040 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 46 | 0000000 | 00000 |
1/16" | 1 1/4" | 9,040 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
1/16" | 1/2" | 9,040 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 46 | 0000000 | 0000 |
1/16" | 1/2" | 9,040 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
Bench Grinder Cutoff Wheels for Carbide, Ceramics, and Glass


These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | Grit | Each | |
6" Dia. | |||||||||
0.035" | 1 1/4" | 10,175 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 0000000 |
Portable Circular Saw Cutoff Wheels for Metal


Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | |||||||||||
1/8" | 5/8" | Round | 10,200 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Steel | 24 | 0000000 | 00000 |
Fast-Cut Long-Life Circular Saw Blades for Masonry and Stone


The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
6" Dia. | |||||||||||
5/8", 7/8" | Round/Diamond | 0.08" | 10,185 | Diamond | Steel | Dry, Wet | 0.4" | Segmented | Reducer Bushing | 0000000 | 000000 |
Smooth-Cut Long-Life Circular Saw Blades for Masonry and Stone


A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Includes | Each | |
6" Dia. | |||||||||||
5/8", 7/8" | Round | 0.08" | 10,185 | Diamond | Steel | Dry, Wet | 0.4" | Continuous | Reducer Bushing | 0000000 | 000000 |
Circular Saw Blades for Composites and Graphite


A blend of tungsten carbide and diamond grits on the continuous edge of these blades cuts hard, nonmetallic materials including composites and graphite. Use dry or with water or coolant (not included).
For technical drawings and 3-D models, click on a part number.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Edge Style | Each | |
6" Dia. | |||||||||
5/8" | Round | 0.12" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | 00000000 | 0000000 |
Dry-Cutting Circular Saw Blades for Tile


A continuous edge coated in diamond grit makes fast, smooth cuts in stone and ceramic tile.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Each | |
6" Dia. | ||||||||||
5/8" | Round | 0.06" | 10,185 | Diamond | Steel | Dry | 0.2" | Continuous | 0000000 | 000000 |
Wet-Cutting Circular Saw Blades for Tile


Use these blades with water or coolant (not included) to produce smoother cuts in stone and ceramic tile than dry-cutting blades. They're also for use on glass. They have a continuous edge coated in diamond grit.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Cutting Application | Diamond Depth | Edge Style | Each | |
6" Dia. | ||||||||||
5/8" | Round | 0.06" | 10,185 | Diamond | Steel | Wet | 0.2" | Continuous | 0000000 | 000000 |
Circular Saw Blades for Wood


Cut wood, plywood, and particleboard. Choose blades with more teeth for cutting across the grain; choose blades with fewer teeth for cutting with the grain (ripping). Blades with a narrower width of cut make faster cuts with less material loss.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | Each | |
6" Dia. | ||||||||||
1/2" | Round | 20 | 0.067" | 9,500 | 20° | Carbide | Steel | Across Grain, With Grain (Rip Cut) | 0000000 | 000000 |
Groove-Cutting Circular Saw Blades for Wood



Also known as dado-head blades, these are for cutting grooves across the grain and with the grain (ripping) in all types of wood.
Material | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Number of Teeth | Width of Cut | Max. Speed, rpm | Hook Angle | Tooth | Body | Cut Type | For Use On | Includes | Each | |
6" Dia. | ||||||||||||
5/8" | Round | 20 | 0.25"-0.906" | 9,000 | -12° | Carbide | Carbide | Across Grain, With Grain (Rip Cut) | Wood | Two Cutting Blades, Removable Chip-Clearing Blades, Shims, Plastic Case | 0000000 | 0000000 |
Circular Saw Blades for Rubber and Reinforced Hose


Make clean cuts in rubber and plastic hose with the scalloped knife edge on these blades.
For technical drawings and 3-D models, click on a part number.
Material | |||||||
---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Tooth | Body | Each | |
6" Dia. | |||||||
5/8" | Round | 0.093" | 4,000 | Steel | Steel | 000000 | 0000000 |