Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Arbor Hole Arbor Hole |
|---|
|
For Use On For Use On |
|---|
|
|
For Use With For Use With |
|---|
|
Reinforcement Material Reinforcement Material |
|---|
|
Abrasive Material Abrasive Material |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Wheel Shape Wheel Shape |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Fast-Cut Straight Grinder Cutoff Wheels for Metal
Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel. Wheels are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
7" Dia. | ||||||||||
| 0.045" | 1/2" | 10,500 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 00000 |
| 0.045" | 5/8" | 10,500 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
| 0.045" | 7/8" | 10,500 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
Straight Grinder Cutoff Wheels for Stainless Steel
For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels. They’re reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
7" Dia. | |||||||||
| 0.045" | 7/8" | 10,500 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 00000 |
Flush-Cut Angle Grinder Cutoff Wheels for Metal
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in aluminum, iron, stainless steel, and steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Arbor Hole Thread Size | Each | |
7" Dia. | |||||||||||
| 0.045" | 7/8" | 8,500 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | __ | 0000000 | 00000 |
| 3/32" | __ | 8,600 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 5/8"-11 | 0000000 | 0000 |
| 3/32" | 7/8" | 8,600 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | __ | 0000000 | 0000 |
Angle Grinder Cutoff Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
7" Dia. | ||||||||||
| 0.045" | 7/8" | 8,600 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 00000 |
| 1/16" | 7/8" | 8,600 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 00000000 | 0000 |
| 3/32" | 7/8" | 8,600 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 0000 |
Angle Grinder Cutoff Wheels for Cutting and Notching Metal
Made of premium grade abrasives, these wheels are strong and thick for making notches in aluminum, iron, stainless steel, and steel. They’re reinforced with two layers of fiberglass mesh. Also known as Type 27, raised-hub, and depressed-center cutoff wheels, they outperform Type 1 wheels when making flush cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Wheel Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
7" Dia. | ||||||||||
| 0.09" | 5/8"-11 | 8,500 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 00000 |
Flush-Cut Angle Grinder Cutoff Wheels for Stainless Steel
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make fast, burr-free cuts in stainless steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Angle Grinder Cutoff Wheels for Stainless Steel
Make fast, burr-free cuts in stainless steel with these ceramic and zirconia alumina wheels. They’re reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Contaminant-Free Angle Grinder Cutoff Wheels for Stainless Steel
Prevent corrosion and discoloration on stainless steel—these wheels contain less than 0.1% iron, chloride, and sulfur contaminants. They have an aluminum oxide grit and are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
7" Dia. | |||||||||
| 0.062" | 7/8" | 8,600 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | 46 | 0000000 | 00000 |
Flush-Cut Contaminant-Free Angle Grinder Cutoff Wheels for Stainless Steel
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They contain less than 0.1% iron, chloride, and sulfur contaminants, so they won't corrode or discolor stainless steel. Wheels are aluminum oxide abrasive that is reinforced with two layers of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
7" Dia. | |||||||||
| 0.062" | 7/8" | 8,600 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | 46 | 00000000 | 000000 |
Angle Grinder Cutoff Wheels for Cutting and Notching Stainless Steel
Made of premium grade of abrasives, these wheels are strong and thick for making notches in stainless steel. They’re reinforced with two layers of fiberglass mesh. Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
7" Dia. | |||||||||
| 0.09" | 5/8"-11 | 8,500 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 000000 |
Flush-Cut Angle Grinder Cutoff Wheels for Aluminum, Brass, and Copper
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make quick cuts in soft metal such as aluminum, brass and copper without clogging. Wheels are reinforced with two layers of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
7" Dia. | |||||||||
| 0.045" | 7/8" | 8,500 | Type 27 | Raised Hub | Aluminum Oxide | Fiberglass Mesh | 24 | 0000000 | 00000 |
Angle Grinder Cutoff Wheels for Aluminum, Brass, and Copper
Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
7" Dia. | |||||||||
| 0.062" | 7/8" | 8,600 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 30 | 0000000 | 00000 |
Bench Grinder Cutoff Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Choose a Grit | Each | |
7" Dia. | ||||||||||
| 0.035" | 1 1/4" | 8,730 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 000000 |
| 1/16" | 1 1/4" | 8,730 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 000000000 | 00000 | |
| 1/16" | 5/8" | 8,600 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 00000000 | 0000 |
Smooth-Cut Bench Grinder Cutoff Wheels for Metal
An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
7" Dia. | ||||||||||
| 1/16" | 1 1/4" | 7,745 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 46 | 0000000 | 00000 |
| 1/16" | 1 1/4" | 7,745 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
| 1/16" | 1/2" | 7,745 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 46 | 0000000 | 0000 |
| 1/16" | 1/2" | 7,745 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 0000000 | 0000 |
Bench Grinder Cutoff Wheels for Carbide, Ceramics, and Glass
These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | Grit | Each | |
7" Dia. | |||||||||
| 0.04" | 1 1/4" | 8,725 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 0000000 |
Portable Circular Saw Cutoff Wheels for Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
7" Dia. | |||||||||||
| 3/32" | 5/8" | Round/Diamond | 8,500 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 00000 |
Portable Circular Saw Cutoff Wheels for Stainless Steel
These wheels are designed to cut stainless steel. They are reinforced with a layer fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
7" Dia. | |||||||||
| 1/16" | 5/8" | 8,600 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | 36 | 0000000 | 000000 |
Portable Circular Saw Cutoff Wheels for Sheet Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
7" Dia. | |||||||||||
| 1/8" | 5/8" | Round/Diamond | 8,600 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 00000 |
Portable Circular Saw Cutoff Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These silicon carbide wheels are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
7" Dia. | ||||||||||
| 1/8" | 5/8" | Round/Diamond | 8,600 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 24 | 000000 | 00000 |