Bronze Cutters | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

View catalog pages (139)

Forward

How can we improve?

15,459 Products

Cutters

Economy Nut Cutters

Split one side of the nut at a time with a nonreplaceable blade.

Nut Cutters

Turn the adjustment screw with a wrench to force the cutting blade into one side of a nut.

Air-Powered Pliable Sheet Cutters

Leave clean cut edges in a variety of pliable materials.

Electric Pliable Sheet Cutters

Circular Saw Blades

Circular Saw Blades for Copper, Brass, and Bronze

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape.

Miter and Chop Saw Blades
for Copper, Brass, and Bronze

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape.

Hole Saws

These standard saws have high-speed steel teeth.

Long-Life Hole Saws

The carbide teeth on these saws last up to twice as long as high-speed steel teeth.

Fast-Cut Hole Saws

Specially designed teeth cut faster than the teeth on standard hole saws.

Hole Saws with Built-In Arbor

Quickly connect these saws to your drill or drill press with the built-in arbor.

Long-Life Large Diameter Hole Saws

The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.

Large Diameter Hole Saws

These saws have high-speed steel teeth.

Heavy Duty Hole Saws for
Sheet Metal and Plastic Sheets

The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth.

Hole Saws for Sheet Metal

These high-speed steel saws cuts through aluminum, brass, bronze, and steel.

Hole Saws for Spot Welds

Cut through spot welds on sheet metal and make faster, more precise cuts than drill bits and other hole saws.

Impact-Driver Hole Saws for Sheet Metal

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.

Adjustable-Diameter Hole Saws for Sheet Metal

Use these saws with a drill press to cut a variety of hole sizes in sheet metal.

Adjustable Large-Diameter Hole Saws for Sheet Metal

Attach these saws to your portable drill to cut a range of large diameter hole sizes in sheet metal.

Hole Saw Kits

These kits have saws with high-speed steel teeth and a steel body.

Long-Life Hole Saw Kits

The saws in these kits have carbide-tipped teeth, so they last up to twice as long as saws with high-speed steel teeth.

Hole Saw Kits for Sheet Metal

Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets.

Multipurpose Band Saw Blades

Anti-Vibration Long-Life Band Saw Blades

Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother finish than Long-Life Band Saw Blades. They're also known as variable-set blades.

Long-Life Band Saw Blades

Tooth size and number per inch are constant throughout the blade

Long-Life Band Saw Blades for Thin Metal

Tooth size and number per inch are constant throughout the blade.

Anti-Vibration Long-Life Band Saw Blades for Thin Metal

Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother finish than Long-Life Band Saw Blades for Thin Metal. They're also known as variable-set blades.

Long-Life Band Saw Blades for
Structural Shapes and Bundles

Cut structural shapes such as I-beams and angle iron as well as bundles of structural shapes and tubing with less tooth breakage than other blades. The teeth are reinforced, forward-angled, and widely spaced to leave room for chips to collect.

Long-Life Band Saw Blades for Thick Materials

Make clog-free cuts in thick cross sections of steel, aluminum, brass, bronze, wood, and plastic. These blades have forward-angled teeth and plenty of space for chips to collect.

Band Saw Blades for Curved Cuts

Made from flexible carbon steel, these blades cut curves.

Band Saw Blades for Straight Cuts

These carbon steel blades are good for making straight cuts.

Band Saw Blades for Curved Cuts in Thin Metal

Cut curves with these flexible carbon steel blades.

Band Saw Blades for Straight Cuts in Thin Metal

Make straight cuts with these carbon steel blades.

Band Saw Blades for Portable Band Saws

Portable Band Saw Blades for Thin Metal

Tooth size and number per inch are constant throughout these blades.

Anti-Vibration Portable Band Saw Blades for Thin Metal

The teeth on these blades vary in size, number per inch, and pattern to reduce vibration, so they create a smoother cut than Portable Band Saw Blades for Thin Metal. They're also known as variable-set blades.

Anti-Vibration Portable Band Saw Blades

Also known as variable-set blades, these have teeth that vary in size, number per inch, and pattern to reduce vibration so they create a smoother cut than Portable Band Saw Blades.

Portable Band Saw Blades

Tooth size and number per inch are constant throughout the blade

Multipurpose Band Saw Blade Coil Stock

Long-Life Band Saw Blade Coil Stock for Thin Metal

Tooth size and number per inch are constant throughout these blades.

Anti-Vibration Long-Life Band Saw
Blade Coil Stock for Thin Metal

Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother cut than Long-Life Band Saw Blade Coil Stock for Thin Metal. They're also known as variable-set blades.

Anti-Vibration Long-Life Band Saw Blade Coil Stock

Create a smoother cut than Long-Life Band Saw Blade Coil Stock—these blades have teeth that vary in size, number per inch, and pattern to reduce vibration. They're also known as variable-set blades.

Long-Life Band Saw Blade Coil Stock

These blades have teeth with a constant size and number per inch throughout the blade.

Band Saw Blade Coil Stock for Straight Cuts

These carbon steel blades are rigid to make straight cuts.

Band Saw Blade Coil Stock
for Straight Cuts in Thin Metal

Cut straight lines with these rigid carbon steel blades.

Band Saw Blade Coil Stock for Curved Cuts

Made from flexible carbon steel, these blades bend to cut curves.

End Mills and Milling Cutters

High-Speed Steel T-Slot End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They're often used to create slots in machine tool tables, indexing tables, and other workholding surfaces.

Carbide-Tipped T-Slot End Mills

Made of carbide-tipped steel, these end mills maintain a sharper, harder edge at high temperatures than high-speed steel. Use them to create slots in machine tool tables, indexing tables, and other workholding surfaces.

High-Speed Steel Dovetail End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They create dovetail slots for connecting two components with a sliding fit.

Carbide Dovetail End Mills for O-Rings

Create dovetail grooves that allow O-rings to flex without falling out of place.

Carbide Dovetail End Mills for Dovetail Milling Vises

Cut dovetail notches into your workpiece for use with our Dovetail Milling-Machine Vises.

Cobalt Steel Dovetail End Mills

With better heat and wear resistance than high-speed steel, these cobalt steel dovetail cutters run at higher speeds and provide better performance on hard material. Use them to create dovetail slots for connecting two components with a sliding fit.

Carbide Square End Mills

Oversize-Tolerance Carbide Square End Mills

Also known as NC tolerance end mills, these carbide end mills have oversize mill diameter tolerances. They're sized to match standard high-speed steel end mills, so you can use them as longer-lasting replacements without changing the size of the cut.

Roughing Carbide Square End Mills

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

Fast-Cutting Carbide Square End
Mills for Aluminum, Brass, and Bronze

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life. They are uncoated for use in soft material, such as aluminum, brass, and bronze.

Carbide Square End Mills for
Aluminum, Brass, and Bronze

A titanium-carbonitride (TiCN) coating prevents soft material, such as aluminum, brass, and bronze, from accumulating on the cutting edge and creating an uneven finish.

Roughing Carbide Square End Mills
for Aluminum, Brass, and Bronze

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds. They are uncoated for use in soft material, such as aluminum, brass, and bronze.

Carbide Square End Mills with Two Milling Ends

When one end wears out, switch to the opposite end for two times the life of a standard carbide end mill. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

High-Speed Steel Square End Mills

Use these end mills for short runs and general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Undersize-Tolerance High-Speed
Steel Square End Mills

Commonly used to make keyways in rotary shafts, these tools have a -0.0015" to 0.0000" mill diameter tolerance for creating a precise fit.

Roughing High-Speed Steel Square End Mills

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

High-Speed Steel Square End Mills
for Aluminum, Brass, and Bronze

With a higher helix angle than standard high-speed steel end mills, these clear more chips and generate less heat, making them good for milling soft material, such as aluminum, brass and bronze.

High-Speed Steel Square End
Mills with Two Milling Ends

When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Carbide Inserts for Replaceable Carbide-Insert
End Mills for Manual Milling Machines

Pair these carbide inserts with our Replaceable Carbide-Insert End Mills for Manual Milling Machines.

Carbide Inserts for Replaceable Carbide-Insert End Mills

Pair these carbide inserts with our Replaceable Carbide-Insert End Mills. They have a mounting hole that allows you to fasten them directly to the end mill body for a hold that's strong enough to handle the high speeds of a CNC machine.

Replaceable Carbide-Insert End Mills

Fasten carbide inserts directly to these end mills for a hold that's strong enough to handle the high speeds of a CNC machine. Replaceable carbide-insert end mills reduce waste and cost in high-volume jobs—when the cutting edges dull, replace the carbide inserts instead of the entire end mill.

Cobalt Steel Square End Mills

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

Roughing Cobalt Steel Square End Mills

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

Roughing Cobalt Steel Square End
Mills for Aluminum, Brass, and Bronze

A higher helix angle means these end mills clear more chips than other roughing cobalt steel end mills, making them better for milling aluminum, brass, and bronze. Serrations along the cutting edge act as chip breakers, so they can remove large amounts of material at high speeds.

Cobalt Steel Square End Mills with Two Milling Ends

When one end wears out, switch to the opposite end for two times the life of a standard cobalt steel end mill. With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

Carbide Chamfer End Mills

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their angled profile allows chamfer, bevel, and other angled cuts.

High-Speed Steel Chamfer End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. Their angled profile allows chamfer, bevel, and other angled cuts.

High-Speed Steel Double-Chamfer End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. The teeth are angled on both sides so you can make top and bottom chamfer cuts without having to flip the workpiece.

Carbide-Tipped Double-Chamfer End Mills

These carbide-tipped end mills provide a sharper, harder cutting edge and better wear resistance than high-speed steel without the brittleness of solid carbide. Their teeth are angled on both sides so you can make top and bottom chamfer cuts without having to flip the workpiece.

Carbide Double-Chamfer End Mills

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. The teeth are angled on both sides so you can make top and bottom chamfer cuts without having to flip the workpiece.

Outside Chamfer End Mills for Pipes, Tubes, and Rods

Mill an angled edge to the entire outside diameter of pipe, tubes, and rods in a single pass with more speed and precision than a handheld scraper. These end mills deburr pipe and tube for butt welds and shape rods for sliding into housings and holes.

High-Speed Steel Tapered Square End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. Also known as taper degree end mills, they're often used to machine angled slots in dies and molds.

Carbide Tapered Square End Mills

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Also known as taper degree end mills, they're often used to machine angled slots in dies and molds.

Carbide Tapered Ball End Mills

These tools have a tapered profile and rounded cutting edge for making smooth contours on intricate, three-dimensional shapes. They're also known as taper degree end mills. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

Carbide Ball End Mills

Carbide Ball End Mills for Aluminum, Brass, and Bronze

A titanium-carbonitride (TiCN) coating prevents soft material, such as aluminum, brass, and bronze, from accumulating on the cutting edge and creating an uneven finish.

Carbide Ball End Mills with Two Milling Ends

High-Speed Steel Ball End Mills

Use these end mills for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

High-Speed Steel Ball End Mills
for Aluminum, Brass, and Bronze

With a higher helix angle than standard high-speed steel end mills, these clear more chips and generate less heat, making them good for milling soft material, such as aluminum, brass and bronze.

High-Speed Steel Ball End Mills with Two Milling Ends

Cobalt Steel Ball End Mills with Two Milling Ends

High-Speed Steel Convex-Radius End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. With curved, side-cutting teeth, they create hollow, inward-curving grooves.

Carbide-Tipped Convex-Radius End Mills

Made of carbide-tipped steel, these end mills maintain a sharper, harder edge at high temperatures than high-speed steel. They have curved, side-cutting teeth for creating hollow, inward-curving grooves.

High-Speed Steel Straight-Tooth Keyseat End Mills

Use these end mills for general purpose keyseat cutting in a wide range of material, including aluminum, iron, and steel. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

Carbide Straight-Tooth Keyseat End Mills

Made of solid carbide, these cutters are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

Cobalt Steel Straight-Tooth Keyseat End Mills

With better heat and wear resistance than high-speed steel, these cobalt steel keyseat cutters can run at higher speeds and provide better performance on hard material. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

High-Speed Steel Staggered-Tooth Keyseat End Mills

Use these end mills for general purpose keyseat cutting in a wide range of material, including aluminum, iron, and steel. An alternating right- and left-hand tooth style allows them to remove more material at high speeds than straight-tooth keyseat cutters.

Carbide Staggered-Tooth Keyseat End Mills

Made of solid carbide, these keyseat cutters are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. They have an alternating right- and left-hand tooth style for removing more material at high speeds than straight-tooth keyseat cutters.

Concave-Radius End Mills

A scalloped profile creates rounded, outward-curving edges.

Carbide Corner-Rounding End
Mills with Two Milling Ends

When one end wears out, switch to the opposite end for two times the life of a standard carbide end mill. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Use them to round sharp corners on the edge of your workpiece.

Carbide Corner-Rounding End Mills

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Use them to round sharp corners on the edge of your workpiece.

High-Speed Steel Corner-Rounding End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They have scooped corners for rounding the sharp edges of your workpiece.

Cobalt Steel Corner-Rounding End Mills

With better heat and wear resistance than high-speed steel, these cobalt steel end mills run at higher speeds and provide better performance on hard material. They have scooped corners for rounding the sharp edges of your workpiece.

Carbide Rounded-Edge Square End Mills

For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills. Often used for slotting and pocketing cuts in mold and die making, these end mills have a 90° profile and rounded corners, which reduce flute breakage and chipping.

Cobalt Steel Rounded-Edge Square End Mills

Made of cobalt steel, these end mills have good heat and wear resistance, so they can run at high speeds in hard material. Often used for slotting and pocketing cuts in mold and die making, they have a 90° profile and rounded corners, which reduce flute breakage and chipping.

Engraving End Mills

A fine-point tip cuts lettering, designs, and logos in a variety of metals and composites, such as aluminum, fiberglass, and titanium.

Carbide Drill/Mill End Mills

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than cobalt steel for the longest life and best finish on hard material. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, chamfering, and spotting cuts.

Cobalt Steel Drill/Mill End Mills

Made of cobalt steel, these end mills have good heat and wear resistance, so they can run at high speeds in hard material. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, chamfering, and spotting cuts.

Arbor-Mount Milling Cutters

High-Speed Steel Slitting Saws

These general purpose saws are good for cutoff, slitting, and slotting applications in a wide range of materials, including aluminum, iron, and steel.

Carbide Slitting Saws

Made of solid carbide, these saws are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Use them for cutoff, slitting, and slotting applications.

Smooth-Finish Slitting Saws

Also known as jeweler's slotting saws and metal slitting saws, these saws are good for use on wire, tubing, extrusions, and other very thin material that requires delicate cuts.

Slitting Saws with Side Teeth

With peripheral and side teeth, these saws remove chips for a consistent cutting width.

Face Milling Cutters

Also known as shell cutters, these high-speed steel cutters are good for face and side milling. They have a large mill diameter for removing a large amount of material per pass.

Gear Cutters

Mill 14½° pressure angle spur gears. Also known as involute gear cutters.

End Mill and Milling Cutter Sets

Carbide Square End Mill Sets with Two Milling Ends

Offering two times the life of a standard carbide end mill, the end mills in these sets have two milling ends so you can switch to the opposite end when one end wears out. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

Carbide Square End Mill Sets

The end mills in these sets have one milling end and a standard shank. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

High-Speed Steel Square End Mill Sets

For general purpose milling in most material, the end mills in these sets have one milling end and a standard shank.

High-Speed Steel Square End
Mill Sets with Two Milling Ends

Offering two times the life of a standard end mill, these have two milling ends so you can switch to the opposite end when one end wears out. Use them for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Drill/Mill End Mill Sets

These multifunction tools have a 90° pointed tip that allows them to be used for drilling as well as for slotting, profiling, and chamfering cuts.

Carbide Ball End Mill Sets with Two Milling Ends

Carbide Ball End Mill Sets

High-Speed Steel Ball End Mill Sets

Use these end mills for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Lathe Tools

Carbide-Tipped Turning Lathe Tools

Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools.

High-Speed Steel Turning Lathe Tools

Machine plastic and most metal with these high-speed steel tools.

Chip-Breaking High-Speed Steel Cutoff Blades

A thinner cutting edge and thicker top edge give these blades a T-shape profile that moves chips away from the cut and reduces friction for fast cutting.

High-Speed Steel Cutoff Blades

Also known as parting blades, use these to separate a finished part from the workpiece.

Carbide-Tipped Cutoff Blades

The carbide tip brazed onto these blades is more wear resistant than high-speed steel.

Carbide-Tipped External
Grooving and Cutoff Lathe Tools

A carbide tip brazed onto a ground steel shank makes these tools more wear resistant than high-speed steel tools.

High-Speed Steel External Grooving Lathe Tools

Machine grooves in plastic and most metal with these high-speed steel tools.

Internal Grooving Lathe Tools for Retaining Rings

Long-Reach Internal Grooving
Lathe Tools for Retaining Rings

An extra-long shank provides additional reach.

Internal Grooving Lathe Tools for O-Rings

Cut small grooves inside a workpiece for insertion and removal of O-rings.

Face Grooving Lathe Tools

Machine circular grooves onto the end of a workpiece.

Carbide-Tipped External Threading Lathe Tools

The carbide tip brazed onto the ground steel shanks of these tools is more wear resistant than high-speed steel.

High-Speed Steel External Threading Lathe Tools

Cut threads in plastic and most metal with these high-speed steel tools.

Solid Carbide Internal Threading Lathe Tools

Solid carbide provides more rigidity than carbide-tipped tools.

Carbide-Tipped Internal Threading Lathe Tools

A carbide tip brazed onto a ground steel shank makes these tools less brittle than solid carbide tools.

Curve-Cutting Lathe Tools

Form concave or convex edges on a workpiece.

Small-Diameter Round-Shank Boring Lathe Tools

These are the smallest boring tools we offer.

Long-Reach Round-Shank Boring Lathe Tools

The long steel shank on these tools can reach farther inside the workpiece than standard boring tools.

Round-Shank Boring Lathe Tools

Use these tools to enlarge existing holes to precise diameters.

Square-Shank Boring Lathe Tools

Insert the square shank of these tools into the slot of a boring tool holder and use them to enlarge existing holes to precise diameters.

Internal Profiling Lathe Tools

Contour the interior wall of a hollow workpiece.

Long-Reach Internal Profiling Lathe Tools

An extra-long shank provides additional reach.

Grind-Your-Own Lathe Tool Blanks

Grind these hardened steel blanks to the size and shape you need.

Quick-Change Lathe Tools and Holders

Reduce tooling setup time—install the holder once and alternate between applications by switching out the bit.

Lathe Tool Sets

Small-Diameter Boring Lathe Tool Sets

These sets contain some of the smallest boring tools we offer.

Long-Reach Boring Lathe Tool Sets

The long steel shank on these tools can reach farther inside the workpiece than standard boring tools.

Boring Lathe Tool Sets

Use these tools to enlarge existing holes to precise diameters.

Carbide-Tipped Turning Lathe Tool Sets

Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools.

High-Speed Steel Turning Lathe Tool Sets

Machine plastic and most metal with these high-speed steel tools.

Indexable Lathe Tools

Economy Carbide Inserts

Use these carbide inserts for general purpose turning.

Carbide Inserts for Multiple Materials

Choose these premium turning carbide inserts to cut a variety of materials without changing out your tool.

Carbide Inserts for Non-Ferrous Materials

Cut aluminum, copper, brass, and other non-ferrous materials with these premium inserts.

Cutoff and Grooving Carbide Inserts

Combine a holder and carbide insert to perform cutoff and grooving tasks on a lathe.

Carbide Inserts for Boring Carbide
Insert Holders with Coolant Hole

Pair one of these inserts with a compatible boring carbide insert holder with coolant hole.

High-Performance Threading Carbide Inserts

Install these inserts into a compatible holder to cut external or internal threads on a workpiece.

High-Performance Grooving Carbide Inserts

These inserts can cut grooves on both the outside and inside of a workpiece depending on the holder used.

High-Speed Steel Inserts for Indexable Threading Tools

Indexable Threading Tools

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

Carbide Inserts for Internal
Profiling Carbide Insert Holders

Combine a carbide insert with a compatible internal profiling holder to create a tool that can contour the interior wall of a hollow workpiece.

Hollow-Core Cutters for Magnetic-Base Drills

Inch Size Hollow-Core Cutters for Magnetic-Base Drills

Use these inch size cutters with magnetic-base drills.Also known as annular cutters.

Metric Size Hollow-Core Cutters for Magnetic-Base Drills

Use these metric cutters with magnetic-base drills. Also known as annular cutters.

Tap Size Hollow-Core Cutters for Magnetic-Base Drills

These cutters are perfectly sized for cutting holes that will be tapped later. Also known as annular cutters.

Hollow-Core Cutter Sets for Magnetic-Base Drills

Sets include cutters, a pilot pin, and a hex key. Also known as annular cutters.

Multiple-Sheet Inch Size Hollow-Core
Cutters for Magnetic-Base Drills

The geometry of these cutters allows you to cut aligned holes in multiple sheets at one time. Also known as annular cutters.

Hollow-Core Cutters for Milwaukee
Magnetic-Base Drill Presses

Use these cutters with Milwaukee magnetic-base drill presses. Also known as annular cutters.

Round-Shank Drill Bits

Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

Extended-Length Drill Bits

Drill Bits for Precise Holes

Specially-designed flutes keep these bits centered as they drill, resulting in straighter, rounder holes with tighter tolerances. Also known as double-margin drill bits.

Chip-Clearing Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Extended-Length Chip-Clearing Drill Bits

Carbide Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Carbide Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Quick-Change Carbide Drill Bits

Make fast bit changes—all of these bits have the same shank diameter, eliminating the need for different collets to hold each size.

Smooth-Finish Carbide Drill Bits

Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.

Chip-Clearing Carbide Drill Bits

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Short-Flute Extended-Length Carbide-Tipped Drill Bits

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Extended-Length Carbide-Tipped Drill Bits

Carbide-Tipped Drill Bits

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Carbide-Tipped Drill Bits

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

1/2" Diameter Reduced-Shank Drill Bits

Carbide-Tipped 1/2" Diameter Reduced-Shank Drill Bits

More wear resistant than cobalt steel and high-speed steel, carbide-tipped bits maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

Hex-Shank Drill Bits

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

Drill Bits for Aluminum, Brass, and Bronze

Because softer metal, like aluminum, brass, and bronze, can clog a bit, the flutes on these bits lift chips out of the hole. Also known as slow-spiral drill bits.

High-Speed Steel Multidiameter Drill Bits

Use for drilling in most metal.

Carbide Hole-Starting Drill Bits

Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Drill Bits for Countersunk Holes

Round-Shank Drill Bits with
Guide for Countersunk Holes

The built-in guide has a beveled tip that fits into countersunk holes in hardware, such as hinges and latches, to center the bit.

Hex-Shank Drill Bits with Guide for Countersunk Holes

Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.

Drill Bit Sets

These jobbers'-length bits have the rigidity and length required for most applications.

Short-Length Drill Bit Sets

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

Carbide Drill Bit Sets

For the highest accuracy and longest tool life, these solid-carbide bits are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits.

Chip-Clearing Drill Bit Sets

Designed to lift chips out of the hole, these bits reduce clogging and improve coolant flow.

Carbide-Tipped Drill Bit Sets

Hex-Shank Drill Bit Sets

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

High-Speed Steel 1/2" Diameter
Reduced-Shank Drill Bit Sets

Use these bits for general purpose drilling in most material.

3/8" Diameter Reduced-Shank Drill Bit Sets

1/4" Diameter Reduced-Shank Drill Bit Sets

Multidiameter Drill Bit Sets

Steps with progressively larger diameters let you drill a range of sizes with one bit. Also known as step drills.

Left-Hand Drill Bit Sets

Also known as reverse-flute bits, the flutes spiral in the opposite direction of other bits. Use in counterclockwise drilling applications such as removing broken screws.

Countersinks for Screws

High-Speed Steel Countersinks for Screws

Hex-Shank High-Speed Steel Countersinks for Screws

Pop these countersinks into power drills, screwdrivers, and other tools that accept 1/4" hex shanks. Tools grip their hex shanks more securely than round shanks to tackle jobs that require higher torque.

Smooth-Finish High-Speed
Steel Countersinks for Screws

Specially designed with spiral flutes that reduce chip buildup on the cutting edge, these countersinks produce a clean, smooth finish on your material.

High-Speed Steel Countersinks with
Two Countersinking Ends for Screws

Cobalt Steel Countersinks for Screws

More heat and abrasion resistant than high-speed steel, cobalt steel has better performance on hard-to-machine materials.

Carbide Countersinks for Screws

Carbide Countersinks with Two
Countersinking Ends for Screws

Countersinks for Rivets

Carbide Countersinks for Rivets

Often used to cut hard and abrasive materials, these carbide countersinks are harder, stronger, and more wear resistant than cobalt steel and high-speed steel countersinks.

High-Speed Steel Countersinks for Rivets

Carbide Countersinks with Two
Countersinking Ends for Rivets

Smooth-Finish High-Speed
Steel Countersinks for Rivets

Specially designed spiral flutes reduce chip buildup on the cutting edge, so these countersinks produce a clean, smooth finish on your material.

High-Speed Steel Countersinks with
Two Countersinking Ends for Rivets

Cobalt Steel Countersinks for Rivets

More heat and abrasion resistant than high-speed steel for better performance on hard-to-machine materials.

Countersinks for Lathe Centers

Carbide Countersinks for Lathe Centers

Repair Tools for 60° Countersunk Holes

Made with a large number of flutes and cutting edges to lightly shear off material, these tools repair and clean out holes for machining between centers.

Carbide Countersinks with Two
Countersinking Ends for Lathe Centers

High-Speed Steel Countersinks for Lathe Centers

Smooth-Finish High-Speed Steel
Countersinks for Lathe Centers

To create a clean, smooth finish on your material, these countersinks have specially designed spiral flutes that reduce chip buildup on the cutting edge.

High-Speed Steel Countersinks with Two
Countersinking Ends for Lathe Centers

Cobalt Steel Countersinks for Lathe Centers

With more heat and abrasion resistance than high-speed steel countersinks, these have better performance on hard-to-machine materials.

Vibration-Resistant Through-Hole Countersinks

High-Speed Steel Vibration-Resistant
Through-Hole Countersinks for Screws

These countersinks have an angled hole that passes through the center of the tool to reduce vibration and chatter for creating smooth cuts and preventing chips from clogging the tool.

High-Speed Steel Vibration-Resistant Through-Hole
Countersinks with Two Countersinking Ends for Screws

High-Speed Steel Vibration-Resistant
Through-Hole Countersinks with Pilot for Screws

The built-in pilot maintains alignment in the hole.

Cutters

Economy Nut Cutters

Nut Cutters

Air-Powered Pliable Sheet Cutters

Electric Pliable Sheet Cutters

Circular Saw Blades

Circular Saw Blades for Copper, Brass, and Bronze

Miter and Chop Saw Bladesfor Copper, Brass, and Bronze

Hole Saws

Hole Saws

Long-Life Hole Saws

Fast-Cut Hole Saws

Hole Saws with Built-In Arbor

Long-Life Large Diameter Hole Saws

Large Diameter Hole Saws

Heavy Duty Hole Saws forSheet Metal and Plastic Sheets

Hole Saws for Sheet Metal

Hole Saws for Spot Welds

Impact-Driver Hole Saws for Sheet Metal

Adjustable-Diameter Hole Saws for Sheet Metal

Adjustable Large-Diameter Hole Saws for Sheet Metal

Hole Saw Kits

Long-Life Hole Saw Kits

Hole Saw Kits for Sheet Metal

Multipurpose Band Saw Blades

Anti-Vibration Long-Life Band Saw Blades

Long-Life Band Saw Blades

Long-Life Band Saw Blades for Thin Metal

Anti-Vibration Long-Life Band Saw Blades for Thin Metal

Long-Life Band Saw Blades forStructural Shapes and Bundles

Long-Life Band Saw Blades for Thick Materials

Band Saw Blades for Curved Cuts

Band Saw Blades for Straight Cuts

Band Saw Blades for Curved Cuts in Thin Metal

Band Saw Blades for Straight Cuts in Thin Metal

Band Saw Blades for Portable Band Saws

Portable Band Saw Blades for Thin Metal

Anti-Vibration Portable Band Saw Blades for Thin Metal

Anti-Vibration Portable Band Saw Blades

Portable Band Saw Blades

Multipurpose Band Saw Blade Coil Stock

Long-Life Band Saw Blade Coil Stock for Thin Metal

Anti-Vibration Long-Life Band SawBlade Coil Stock for Thin Metal

Anti-Vibration Long-Life Band Saw Blade Coil Stock

Long-Life Band Saw Blade Coil Stock

Band Saw Blade Coil Stock for Straight Cuts

Band Saw Blade Coil Stockfor Straight Cuts in Thin Metal

Band Saw Blade Coil Stock for Curved Cuts

End Mills and Milling Cutters

High-Speed Steel T-Slot End Mills

Carbide-Tipped T-Slot End Mills

High-Speed Steel Dovetail End Mills

Carbide Dovetail End Mills for O-Rings

Carbide Dovetail End Mills for Dovetail Milling Vises

Cobalt Steel Dovetail End Mills

Carbide Square End Mills

Oversize-Tolerance Carbide Square End Mills

Roughing Carbide Square End Mills

Fast-Cutting Carbide Square EndMills for Aluminum, Brass, and Bronze

Carbide Square End Mills forAluminum, Brass, and Bronze

Roughing Carbide Square End Millsfor Aluminum, Brass, and Bronze

Carbide Square End Mills with Two Milling Ends

High-Speed Steel Square End Mills

Undersize-Tolerance High-SpeedSteel Square End Mills

Roughing High-Speed Steel Square End Mills

High-Speed Steel Square End Millsfor Aluminum, Brass, and Bronze

High-Speed Steel Square EndMills with Two Milling Ends

Carbide Inserts for Replaceable Carbide-InsertEnd Mills for Manual Milling Machines

Carbide Inserts for Replaceable Carbide-Insert End Mills

Replaceable Carbide-Insert End Mills

Cobalt Steel Square End Mills

Roughing Cobalt Steel Square End Mills

Roughing Cobalt Steel Square EndMills for Aluminum, Brass, and Bronze

Cobalt Steel Square End Mills with Two Milling Ends

Carbide Chamfer End Mills

High-Speed Steel Chamfer End Mills

High-Speed Steel Double-Chamfer End Mills

Carbide-Tipped Double-Chamfer End Mills

Carbide Double-Chamfer End Mills

Outside Chamfer End Mills for Pipes, Tubes, and Rods

Miter and Chop Saw Blades
for Copper, Brass, and Bronze

Heavy Duty Hole Saws for
Sheet Metal and Plastic Sheets

Long-Life Band Saw Blades for
Structural Shapes and Bundles

Anti-Vibration Long-Life Band Saw
Blade Coil Stock for Thin Metal

Band Saw Blade Coil Stock
for Straight Cuts in Thin Metal

Fast-Cutting Carbide Square End
Mills for Aluminum, Brass, and Bronze

Carbide Square End Mills for
Aluminum, Brass, and Bronze

Roughing Carbide Square End Mills
for Aluminum, Brass, and Bronze

Undersize-Tolerance High-Speed
Steel Square End Mills

High-Speed Steel Square End Mills
for Aluminum, Brass, and Bronze

High-Speed Steel Square End
Mills with Two Milling Ends

Carbide Inserts for Replaceable Carbide-Insert
End Mills for Manual Milling Machines

Roughing Cobalt Steel Square End
Mills for Aluminum, Brass, and Bronze

High-Speed Steel Ball End Mills
for Aluminum, Brass, and Bronze

Carbide Corner-Rounding End
Mills with Two Milling Ends

High-Speed Steel Square End
Mill Sets with Two Milling Ends

Carbide-Tipped External
Grooving and Cutoff Lathe Tools

Long-Reach Internal Grooving
Lathe Tools for Retaining Rings