We will reply to your message within an hour.
More
The blade edge is coated in diamond grit.
These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer.
Use these blades with water or coolant to produce a smooth cut and minimize heat buildup
Make cuts in hard, brittle materials such as firebrick, stone, and concrete.
Ideal when working across multiple materials, these wheels are specially constructed to cut plastic, fiberglass, concrete, and ceramic, as well as metal.
Diamond-cut teeth effectively cut hard materials.
Swap accessories quickly and safely without tools.
These bits allow you to easily switch to another size by changing only the bit body. They are hollow and cut with their outside edge for drilling holes larger than 1 1/2" in diameter.
Drill holes up to 1 1/2" in diameter.
These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.
The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.
Also known as A-taper bits, these fit rotary hammers with a taper-shank chuck.
These bits have a round or hex shank that fits into the three-jaw chuck on a hammer drill.
Use these diamond-coated hollow bits for wet drilling of masonry, concrete, and rebar with a drilling rig.
The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.
Use these bits with handheld power drills, drill presses, and hammer drills.
A built-in stop ensures repeatable drilling depths for installing drop-in anchors.
Unlike traditional wire-installing drill bits, you do not need to strip the end of the wire when using one of these bits. After drilling, insert the wire into the bit's hollow shaft and pull through the hole.
A more controlled chip removal reduces heat buildup. Use these bits on brittle materials such as block and brick.