Clear All
For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
System of Measurement System of Measurement |
|---|
|
For Use With For Use With |
|---|
|
Abrasive Material Abrasive Material |
|---|
|
Tooth Style Tooth Style |
|---|
 |  |
| Continuous | Gullet |
Wheel Type Wheel Type |
|---|
 | Type 1 |
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Cut Type Cut Type |
|---|
 | Straight |
Body Material Body Material |
|---|
|
Flexibility Flexibility |
|---|
|
Arbor Hole Shape Arbor Hole Shape |
|---|
 | Round |
Arbor Hole Arbor Hole |
|---|
|
Band Saw Blade Type Band Saw Blade Type |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Angle Grinder Cutoff Wheels for Hard Metal
Side View
Made of a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel. Wheels are reinforced with two layers of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
4 1/2" Dia. | ||||||||||
| 0.045" | 7/8" | 13,580 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 00000 |
5" Dia. | ||||||||||
| 0.045" | 7/8" | 12,225 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 46 | 0000000 | 0000 |
6" Dia. | ||||||||||
| 1/16" | 7/8" | 10,185 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 46 | 0000000 | 0000 |
Straight Grinder Cutoff Wheels for Hard Metal
Side View
The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel, Hastelloy, and tool steel. Wheels are reinforced with a layer of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
3" Dia. | ||||||||||
| 0.035" | 1/4" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 60 | 0000000 | 00000 |
| 0.035" | 3/8" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 60 | 0000000 | 0000 |
| 1/16" | 1/4" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 0000 |
| 1/16" | 3/8" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 0000 |
| 1/8" | 3/8" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 0000 |
4" Dia. | ||||||||||
| 0.035" | 3/8" | 19,100 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 60 | 0000000 | 0000 |
| 0.045" | 1/4" | 22,000 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 60 | 0000000 | 0000 |
| 1/16" | 3/8" | 19,100 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 0000 |
| 1/8" | 3/8" | 19,100 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 0000 |
Band Saw Blades for Hardened Steel, Super Alloys, and Graphite
Carbide grit bonded to alloy steel blades cuts through hard materials such as hardened steel, graphite, fiberglass, composites, and nickel alloys including Hastelloy and Inconel. Choose medium grit for less material loss and a smooth finish; choose coarse grit for fast cutting. Blades have a welded seam and are ready to install on your saw. Use coolant (not included) when cutting metals.
Gullet blades quickly cut material that is at least 1/4" thick.
Continuous blades are better than gullet blades for material that fractures and chips easily and material less than 1/4" thick. Use with saw wheels that are at least 24" diameter.
Gullet
Gullet
Material | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | For Min. Material Thick. | For Use On | Body | Abrasive | Each | |
Coarse Grit | ||||||||
| 93" | 3/4" | 0.032" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000000 |
| 120" | 1/2" | 0.025" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 132" | 1" | 0.035" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 138" | 3/4" | 0.032" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 138" | 1" | 0.035" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 144" | 1" | 0.035" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 174" | 1" | 0.035" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| Per Inch | ||||||||
| Other Lengths (45" Min.) | 1/2" | 0.025" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000 |
| Other Lengths (45" Min.) | 1" | 0.035" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000 |
| Each | ||||||||
Medium Grit | ||||||||
| 93" | 1/4" | 0.02" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 93" | 1/2" | 0.025" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 93" | 3/4" | 0.032" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 120" | 1/2" | 0.025" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 132" | 1" | 0.035" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 138" | 1" | 0.035" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 144" | 1" | 0.035" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| Per Inch | ||||||||
| Other Lengths (45" Min.) | 1/2" | 0.025" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000 |
| Other Lengths (45" Min.) | 3/4" | 0.032" | 1/4" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000 |
Continuous
Continuous
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | For Max. Material Thick. | For Min. Saw Wheel Dia. | For Use On | Body | Abrasive | Each | |
Coarse Grit | |||||||||
| 93" | 3/4" | 0.032" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000000 |
| 120" | 1/2" | 0.025" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 132" | 1" | 0.035" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 138" | 3/4" | 0.032" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 138" | 1" | 0.035" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 144" | 1" | 0.035" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 174" | 1" | 0.035" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| Per Inch | |||||||||
| Other Lengths (45" Min.) | 1/2" | 0.025" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000 |
| Other Lengths (45" Min.) | 1" | 0.035" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000 |
| Each | |||||||||
Medium Grit | |||||||||
| 93" | 1/2" | 0.025" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 93" | 3/4" | 0.032" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| 120" | 1/2" | 0.025" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 000000 |
| Per Inch | |||||||||
| Other Lengths (45" Min.) | 1/2" | 0.025" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000 |
| Other Lengths (45" Min.) | 3/4" | 0.032" | 1/4" | 24" | Hardened Steel, Hastelloy, Inconel, Graphite | Steel | Carbide | 00000000 | 0000 |