A double hinge provides high cutting force with low gripping pressure. These cutters are also known as aviation snips.

The handles are angled 90° from the blade so you can cut material from directly above tight spaces.

These cutters make straight cuts and curves.

Blades are tapered to give you more control when cutting straight lines, tight curves, and circles, and they're serrated to prevent slipping. These cutters are also known as duckbill snips.

A double blade creates two cuts and a 7/32" wide waste strip that peels back, leaving two smooth edges with little distortion.

Punch small pieces out of material to create an almost burr-free cut with no material distortion.

Also known a scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut metal up to 1/64" thick with minimal material loss and edge distortion.

Also known as slotting shears, these cutters have a double blade that creates two cuts and a 7/32" wide waste strip that peels back, leaving two smooth edges with little distortion.

Leave clean cut edges in a variety of pliable materials.

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They create dovetail slots for connecting two components with a sliding fit.

Cut dovetail notches into your workpiece for use with our Dovetail Milling-Machine Vises.

Made of carbide-tipped steel, these end mills maintain a sharper, harder edge at high temperatures than high-speed steel. Use them to create slots in machine tool tables, indexing tables, and other workholding surfaces.

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life. They have a 90° corner for milling square corners in slots, pockets, and edges.

Also known as NC tolerance end mills, these carbide end mills have oversize mill diameter tolerances. They're sized to match standard high-speed steel end mills, so you can use them as longer-lasting replacements without changing the size of the cut.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

When one end wears out, switch to the opposite end for two times the life of a standard carbide end mill. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Pair these carbide inserts with our Replaceable Carbide-Insert End Mills for Manual Milling Machines.

Fasten carbide inserts directly to these end mills for a hold that's strong enough to handle the high speeds of a CNC machine. Replaceable carbide-insert end mills reduce waste and cost in high-volume jobs—when the cutting edges dull, replace the carbide inserts instead of the entire end mill.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

Made of solid carbide, these cutters are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.