Lock by screwing the latch into the body.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

The twisted shape of these links prevents loads from rotating or knotting.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Restrict rope and chain movement with the narrow end, attach multiple connectors to the wide end, and then hammer these links closed.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

The pins have flush ends to prevent snagging and accidental disengagement.

The strongest shackles we offer, these connectors have a pin with flush ends that prevents snagging and accidental disengagement.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Indentations in the shackle body hold the head of the pin in place once fastened.

A lip on the shackle keeps the screw from falling out when loosened.

A lip on the shackle keeps the pin from falling out when loosened.

For use in low-vibration applications where the shackle remains stationary.

These rings mount flush and fold down when not in use to eliminate obstructions.

Dimples hold the base tight to prevent it from swiveling.

Accommodate ties in any direction with these rings that swivel all the way around and pivot 180°.

Adhesive on the back holds these rings in place.

Large holes in the base allow adhesive to flow through.