Pull wires all the way through the connector face, and then use the crimper to cut and crimp wires in one step.

Protect sensitive equipment from electromagnetic interference.

The snap-on wire connection pierces the insulation to eliminate the need for wire stripping.

Use an Ethernet cable crimper to terminate these plugs.

Instead of tossing Ethernet cords with a broken locking tab on their RJ45 plug, fix them with these clips.

Push these connectors together for secure Ethernet connections that are quick and easy to connect and disconnect with just one hand. You’ll know when the plug and socket are locked in place when you hear a click.

Add RJ45 connectors to circuit boards.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Protect connections in washdown environments while maintaining access—these RJ45 plugs and adapters latch together securely, yet quickly detach.

FDA compliant to safely touch food and threaded for a tight hold, these connectors won’t vibrate loose as they send high-speed data to sensors and other automated devices in food, beverage, and pharmaceutical plants.

With a ferrite filter block surrounding their contacts, these connectors control and reduce the electromagnetic (EMI) and radio frequency (RFI) interference traveling through them.

Add a D-sub connection to a printed circuit board (PCB). These connectors are often used in applications involving monitoring, control, and communication.

Mount these connectors in a panel cutout.

Join two Ethernet cords—these adapters have an RJ45 female connection on both ends.

Mount these adapters in a panel cutout.

Transmit data between computers, connect two like cables, or connect devices that have different USB sizes or styles.

Connect additional USB ports to your computer.

Mount these adapters directly into panel cutouts to attach D-Sub connectors and cords to computers.

Send video and audio from a single DisplayPort output to multiple displays. These splitters are often used to show the same image on multiple screens or to stretch a computer desktop across two monitors.

Adapt connections to attach cords to a computer.

Connect two fiber-optic cords that have the same gender and fiber-optic connection type.

Play audio and 4K video from a single source on multiple displays. These HDMI splitters are handy for classrooms, conference rooms, factory floors, and trade shows.

Mount two coaxial cords of the same gender and coaxial connection directly onto a panel cutout.

Extend an audio connection by plugging a cord into each end of these adapters.

Create various configurations by snapping these adapters into the ports of keystone wall plates.

Reduce the number of cords needed to send and receive signals where space is tight—these splitters have an M8 plug and two M8 sockets, which are smaller than M12 plugs and sockets.

Use these unshielded cords where signal interference is not a concern.

Use these unshielded cords where signal interference is not a concern.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

These cords contain a single pair of twisted wires, making them lighter and more flexible than other Ethernet cords. They’re good for transportation, robotics, and automation applications.

Often used to connect multiple monitors to a single computer, these cords send video and audio to a display device.

Connect industrial ethernet systems to send data from sensors and switches to I/O boxes and computers.

Connect devices such as computers, printers, and mobile devices.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Send high-definition signals to monitors, TVs, and projectors.

Attach these caps to the socket end of washdown USB cords to maintain an IP67 rating when cords are not in use.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

Use these cords to extend the distance between your FANUC CRX robot arm and your controller.

Transmit audio, video, and data signals over long distances with minimal signal loss.

Display video from one source on two different monitors.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Connect computers, monitors, printers, and other devices with DB connections.

Commonly used for movie, stage, and interior building lighting, these cords connect to equipment with five-pin XLR connections.

Often used in assembly line networks and Fieldbus connections, these cords have B-coded M12 connections.

These cords have a Nano M8 connector (also known as a pico connector) on one end and an USB Type-A connector on the other.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

Filled with gel, these wire taps seal out moisture.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Use this cable for complex and high-speed data and signal transmission.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.

Connect telephones and telephone blocks to a wall jack.

Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.

Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.

Allow more than one phone line to connect to a single telephone jack.

Connect your telephone to the wall jack.

Adapt 10-pin cables for connection to a USB port on a PC.

Use these cables to connect measuring tools with SPC data output directly to a PC.