Each set includes one plug and one socket. These connectors withstand moisture, harsh engine fluids, and high temperatures. Also known as weather-pack connectors.

Configure a connector for your application by combining housings with pins and sleeves for different wire sizes. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Use these connectors in vehicles and other agricultural and construction equipment. They have a sealed nylon housing that resists dust and temporary submersion.

Sets include a plug and socket with wire leads already installed, so they can be quickly added to existing wiring systems. They fit standard Molex plugs and sockets.

Connectors come assembled with wire leads already installed, so they can be quickly added to existing wiring systems. Use them with AMP MATE-N-LOK connectors.

Stack as many connectors on top of each other as needed—the housings clamp together to form a secure attachment.

Rated to MIL-DTL-5015 specifications, these connectors are compatible with other products that meet the same standard. They screw together for a secure connection.

These connectors meet MIL-DTL-26482, so they're compatible with other products that meet the same standard. Quickly mate by pushing them together.

Screw these micro M16 connectors together to securely connect equipment.

To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Send power and signal to devices with M12 connections that are exposed to some of the toughest industrial stresses—from welding to metal machining and changing temperatures.

Plug these connectors into hazardous location devices. Using a NAMUR signal, they operate at a low current and voltage, so they prevent the risk of sparks and ignition in volatile areas.

Join two connectors that both have internal threads.

Minimize signal loss between low-current devices with M8 connections.

Reduce the number of cords needed to send and receive signals where space is tight.

Send higher current than M5, M8, and M12 connectors near tough industrial jobs, such as welding and metal machining.

Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.

Join two connectors that both have internal threads.

Simplify wiring and reduce the number of cords in your automation setup.

Make secure connections with machine tools, robots, and other equipment that vibrates frequently and carries currents as high as 300 amps.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Some of the smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

Join M8 connections to M12 connections.

Send signal and power to low-current devices with M8 connections in food processing and other sanitary applications.

Connectors lock into place for a secure connection in high-vibration environments. They power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

Connect and disconnect your equipment all at once.

When used together, connectors maintain a watertight and corrosion-resistant NEMA 4X connection.

These general purpose M23 connectors send power or signal to servomotors, servocontrollers, and servodrives.

Choose a socket that works with your Siemens servomotor system.

Configure a connector for your application—combine inserts for power and signal with a base and a hood.

These connectors are designed for use in audio equipment.

Connect audio equipment. These connectors mount to panels of any thickness, as long as you drill a mounting hole first.

Plug these adapter cords into a standard outlet and they change AC voltage to DC voltage.

Swap the plug to match the outlet of the region you’re in instead of using separate cords for each country. These adapter cords convert AC voltage to power DC electronics.

Send DC power to multiple electronics from one source. With industry standard barrel-style connections, these splitters are compatible with many power supplies and other devices.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections.

Similar to branches extending from a tree, these cords disperse power from a main power line to run a chain of devices. Power high-amperage fans, pumps, and other machines in motor controls, conveyors, and sorting and packaging systems.

Compatible with Molex connectors, these cords are sized to fit in tight spaces. They're often used in the interior of machines.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Often used in automation systems such as conveyors and sorters, these cords have plug and socket ends, so they quickly connect and disconnect for maintenance and do not need to be hardwired.

Often used for automated systems, motors, and pumps in tough industrial areas such as near welding and metal machining, these cords carry higher current than M5, M8, and M12 cords.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

These cords have an M8 connector on one end and an M12 connector on the other.

Step on or roll carts and platform trucks over these M12 cords without crushing them.

Power up mobile devices and other electronics.

One of the connections on these terminal blocks is a socket instead of a traditional terminal, making it easy to swap out equipment or change your wiring even in small enclosures. Instead of having to attach wire inside the tight space of your enclosure, you can wire a connector wherever it’s easiest and then plug it into the socket.

No need to tighten or loosen any screws—these terminals lock your wiring in place with spring clamps.

The spring-clamp terminals on these blocks make wire installation faster than other types of terminals. These wire connections also stand up to vibration and temperature changes.

Made of ceramic, these blocks withstand high-temperature applications that reach up to 1110° F such as ovens and furnaces. They have recessed screws to reduce the chance you’ll cause a short by accidentally connecting two circuits with a screwdriver or other tool.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

Recessed screw terminals prevent you from accidentally connecting two circuits with a screwdriver or other tool, causing a short.

Blocks mount in a cutout and have terminals on both sides.

With the help of distribution blocks, you can take a high-current wire from your power source and connect it to one or more electrical devices.

Stack multiple ring or spade terminals on the stud terminal; the current flows through the stacked terminals.

Change the M8 8-pin connection on your Schunk gripper to wire leads for hardwiring robots that don’t have an M8 8-pin connection.