Use these wheels for light grinding, deburring, and sharpening.

The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.

Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.

Unlike aluminum oxide wheels, these silicon carbide wheels won’t clog when grinding soft metals.

A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.

The porous bond leaves more space between abrasive grains so heavy amounts of chips and coolant easily flow through.

Multiple layers of nylon mesh embedded with abrasive provide a cushioned grind. Also known as unitized discs or wheels.

A blend of ceramic alumina and zirconia alumina removes material at a 50% faster rate than our Long-Life Grinding Wheels. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels are a blend of aluminum oxide and zirconia alumina, which removes more material and lasts three times as long as our General Purpose Grinding Wheels. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

A large grinding surface, combined with a thick layer of rough abrasive removes more material than other wheels. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

Heat-dissipating holes reduce material buildup and extend the life of the wheel. Wheels have a semiflexible backing that conforms to curved and rough surfaces.

The saucer shape lets you hold these wheels at shallower angles than Type 27 wheels, so they’re more comfortable to handle. They are also known as Type 28 wheels and raised-hub wheels.

Wheels have a large surface area and a thick layer of rough abrasive for heavy material removal on concrete and stone. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

The abrasive grains in these discs are blended with rubber, which cushions during grinding to produce a smoother surface texture than other discs with similar grits. Discs attach to your grinder with a shank.

The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.

Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.

Use bits in any drill chuck that accepts a 1/4" hex shank.

Bits stay cool during grinding so they won’t mar or discolor stainless steel.

The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.

The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.

Secure the shank into the collet or chuck of your tool.

The premium abrasive stays sharp longer.

An additive in the abrasive resists heat.

A coating prevents dust and debris from building up on the abrasive surface.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.

An additive in the abrasive resists heat.

Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.

Reach around barriers to cut, grind, shape, and remove sharp edges in hard-to-access spots.

Pointed teeth cut wood and rubber quickly without clogging.

Diamond-cut teeth effectively cut hard materials.

The abrasive lasts longer than that of standard brushes.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Use on delicate surfaces.

A mounting nut on each side of the arbor lets you use both sides of the brush.

Bristles are partially twisted in alternating directions, which prevents them from separating.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.