Designed with a flange to keep the plunger from being pushed through a hole when the ball is depressed.

An O-ring in the flange creates a tight seal.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

The ring allows you to attach these spring plungers to a lanyard.

Use the lanyard as a tether to secure the spring plunger to machinery and prevent accidental drops.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

Thread onto machinery or attach a knob or handle to the threaded spindle.

A T-handle makes these spring plungers easy to grip.

A smooth ball handle is easy to grip and won't catch on other parts.

An L-handle takes up less space than a T-handle.

Two holes in the plate allow these plungers to be mounted to a flat surface.

Use an arbor press or similar pressure tool to install these spring plungers into a panel.

Lock the nose in the retracted position by pulling the knob and rotating it 90°.

Install with a driver.

A flange keeps the plunger from being pushed through a hole when the ball is depressed.

Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.

Weld these catches in place for a strong permanent hold.

These pins have a low-profile head, so they won't get knocked out of place. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

Add a knob or handle to the threaded shank. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

A smooth ball handle is easy to grip and won't catch on other parts. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

The smooth ring handle on these pins won't catch on parts. The shoulder keeps a portion of the pin outside the hole and makes them easy to grab.

Two spring-loaded balls give these pins more holding power than quick-release pins with only one retaining ball. The balls pop out when the pin is pushed into a hole, and retract when the pin is pulled out.

Use these pins for visibility or to color-code processes. For a more secure hold than standard quick-release pins, they lock in place until you push the button to release the spring-loaded retaining balls.

When there isn't enough room for a T-handle, an L-handle saves space but is still easy to grip. For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

The extra height and smaller width of the grip make the button more accessible in tight spaces. Made entirely of stainless steel, they stand up to corrosive enviroments. Pins lock in place until you push the button to release the spring-loaded retaining balls.

Four spring-loaded retaining balls provide extra holding power. Made entirely of stainless steel, these pins stand up to corrosive enviroments. They lock in place until you push the button to release the spring-loaded retaining balls.

The shaft on these pins retracts into the head to hold thin sheets of material together. Pins lock in place until you push the button to release the spring-loaded retaining balls.

Also known as double-acting pins, these pins lock in place until you push the button or pull the ring to release the spring-loaded retaining balls. The smooth ring handle won't catch on parts.

To insert and remove these pins, press the button, then flip the lever to release the spring-loaded retaining balls. Two-step locking prevents accidental removal.

These pins lock in place until you push the button to release the spring-loaded retaining balls, and can also be secured with a cotter pin for longer-term holding. Two-step locking prevents accidental removal.

When you can't drill a through hole, use one of these flanged receptacles to provide a permanent, blind hole for a quick-release pin.