Maximum Measurement Maximum Measurement |
---|
|
|
Display Type Display Type | Show |
---|
|
Manufacturer Model Number Manufacturer Model Number |
---|
Power Source Power Source |
---|
|
Industry Designation Industry Designation |
---|
|
Read measurements on an LCD. These indicators have a spring-loaded plunger that retracts and extends to measure objects. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Bluetooth tool (sold separately) transmits measurement data via Bluetooth technology to smartphones, tablets, and PCs.
Measuring Range | Measuring Increments | Accuracy | Contact Point | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Manufacturer Model Number | Each | |
Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.0008" | ±0.02 | AGD Group 2 | 5/16" | __ | 2 3/8" | 0.197" | 0.835" | M2.5 | Yes | Yes | 543-782B | 00000000 | 0000000 |
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-783B | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.0001" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-793B | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 5/16" | __ | 2 3/8" | 0.197" | 0.835" | M2.5 | Yes | Yes | 543-791B | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-792B | 00000000 | 000000 |
Lug and Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.0008" | ±0.02 | AGD Group 2 | 5/16" | 1/4" | 2 3/8" | 0.197" | 0.835" | M2.5 | Yes | Yes | 543-782 | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-783 | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.0001" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-793 | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 5/16" | 1/4" | 2 3/8" | 0.197" | 0.835" | M2.5 | Yes | Yes | 543-791 | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-792 | 00000000 | 000000 |
Each | ||
1/4" Hole Dia. Lug Back | 00000000 | 00000 |
Spindle-Lifting Cord (12”) | 00000000 | 00000 |
USB Data Cable (80") | 000000 | 000000 |
10-Pin Data Cable (40”) | 00000000 | 00000 |
10-Pin Data Cable (80”) | 00000000 | 00000 |
Wireless Data Transmitter | 000000 | 000000 |
Wireless Data Receiver | 000000 | 000000 |
Bluetooth Tool | 0000000 | 000000 |
Replacement Battery | 00000000 | 0000 |
Replacement Battery Cover | 00000000 | 0000 |
Replacement Cap | 00000000 | 0000 |
Replacement Carbide Tip | 00000000 | 00000 |
Replacement Coil Spring | 00000000 | 0000 |
Replacement Contact Point | 00000000 | 0000 |
Replacement Spindle Stop Screw | 00000000 | 0000 |
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. A spring-loaded plunger retracts and extends to measure objects. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Bluetooth tool (sold separately) transmits measurement data via Bluetooth technology to smartphones, tablets, and PCs.
Measuring Range | Measuring Increments | Accuracy | Contact Point | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Manufacturer Model Number | Each | |
Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-783B | 00000000 | 0000000 |
0"-0.5" | 0-12.7 | 0.0001" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-793B | 00000000 | 000000 |
Lug and Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-783 | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.0001" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-793 | 00000000 | 000000 |
Each | ||
1/4" Hole Dia. Lug Back | 00000000 | 00000 |
Spindle-Lifting Cord (12”) | 00000000 | 00000 |
USB Data Cable (80") | 000000 | 000000 |
10-Pin Data Cable (40”) | 00000000 | 00000 |
10-Pin Data Cable (80”) | 00000000 | 00000 |
Wireless Data Transmitter | 000000 | 000000 |
Wireless Data Receiver | 000000 | 000000 |
Bluetooth Tool | 0000000 | 000000 |
Replacement Battery | 00000000 | 0000 |
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. They have a larger display than other Mitutoyo electronic indicators for easier reading. A spring-loaded plunger retracts and extends to measure objects. The go/no-go operation indicates when measurements fall outside your set tolerance. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Bluetooth tool (sold separately) transmits measurement data via Bluetooth technology to smartphones, tablets, and PCs.
Measuring Range | Measuring Increments | Accuracy | Contact Point | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Manufacturer Model Number | Each | |
Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-402B | 00000000 | 0000000 |
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-392B | 00000000 | 000000 |
0"-1" | 0-25.4 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-472B | 00000000 | 000000 |
Lug and Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-402 | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-392 | 00000000 | 000000 |
Each | ||
1/4" Hole Dia. Lug Back | 000000000 | 000000 |
Spindle-Lifting Cord (12”) | 00000000 | 00000 |
USB Data Cable (80") | 000000 | 000000 |
10-Pin Data Cable (40”) | 00000000 | 00000 |
10-Pin Data Cable (80”) | 00000000 | 00000 |
Wireless Data Transmitter | 000000 | 000000 |
Wireless Data Receiver | 000000 | 000000 |
Bluetooth Tool | 0000000 | 000000 |
Replacement Battery | 00000000 | 0000 |
These indicators have a larger display than other Mitutoyo electronic indicators for easier reading. A spring-loaded plunger retracts and extends to measure objects. The go/no-go operation indicates when measurements fall outside your set tolerance. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Bluetooth tool (sold separately) transmits measurement data via Bluetooth technology to smartphones, tablets, and PCs.
Measuring Range | Measuring Increments | Accuracy | Contact Point | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Manufacturer Model Number | Each | |
Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-402B | 00000000 | 0000000 |
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-392B | 00000000 | 000000 |
0"-1" | 0-25.4 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-472B | 00000000 | 000000 |
Lug and Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-402 | 00000000 | 000000 |
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 1.606" | 4-48 | Yes | Yes | 543-392 | 00000000 | 000000 |
Each | ||
1/4" Hole Dia. Lug Back | 000000000 | 000000 |
Spindle-Lifting Cord (12”) | 00000000 | 00000 |
USB Data Cable (80") | 000000 | 000000 |
10-Pin Data Cable (40”) | 00000000 | 00000 |
10-Pin Data Cable (80”) | 00000000 | 00000 |
Wireless Data Transmitter | 000000 | 000000 |
Wireless Data Receiver | 000000 | 000000 |
Bluetooth Tool | 0000000 | 000000 |
Replacement Battery | 00000000 | 0000 |
A slim design fits in tight spots. This indicator has a spring-loaded plunger that retracts and extends to measure objects. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Bluetooth tool (sold separately) transmits measurement data via Bluetooth technology to smartphones, tablets, and PCs.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Mount. Stem Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Manufacturer Model Number | Each | |
0"-1" | 0-25.4 | 0.0005" | 0.01 | ±0.0008" | ±0.020 | 3/8" | 0.197" | 1.626" | 4-48 | Yes | Yes | 575-123 | 00000000 | 0000000 |
This indicator comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. A slim design allows it to fit tight spots. It has a spring-loaded plunger that retracts and extends to measure objects. The indicator has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Bluetooth tool (sold separately) transmits measurement data via Bluetooth technology to smartphones, tablets, and PCs.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Mount. Stem Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Manufacturer Model Number | Each | |
0"-1" | 0-25.4 | 0.0005" | 0.01 | ±0.0008" | ±0.020 | 3/8" | 0.197" | 1.626" | 4-48 | Yes | Yes | 575-123 | 00000000 | 0000000 |
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. Backlighting on the LCD changes from green to red when measurements fall outside your set tolerance, so you can check readings at a glance. They can measure TIR (total indicated runout), which determines the range of high and low spots of round parts.
All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Mount. Stem Dia. | Head Dia. | Lg. | Mount. Thread Size | Voltage | Plug Type | Cord Lg., ft. | SPC Data Output | Manufacturer Model Number | Each | |
0"-1.2" | 0-30.4 | 0.0001" 0.00005" 0.00002" | 0.0005 0.001 | ±0.00006" | ±0.0015 | 3/8" | 0.197" | 1.825" | 4-48 | 120V AC | Two Prong | 6 1/2 | Yes | 543-562A | 00000000 | 0000000 |
0"-2.4" | 0-60.9 | 0.0001" 0.00005" 0.00002" | 0.0005 0.001 | ±0.0001" | ±0.0025 | 3/8" | 0.197" | 3.006" | 4-48 | 120V AC | Two Prong | 6 1/2 | Yes | 543-564A | 00000000 | 00000000 |
Check whether measurements are in tolerance at a glance. LCD backlighting changes from green to red to indicate when measurements fall outside your set tolerance. These indicators can measure TIR (total indicated runout), which determines the range of high and low spots of round parts. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Mount. Stem Dia. | Head Dia. | Lg. | Mount. Thread Size | Voltage | Plug Type | Cord Lg., ft. | SPC Data Output | Manufacturer Model Number | Each | |
0"-1.2" | 0-30.4 | 0.0001" 0.00005" 0.00002" | 0.0005 0.001 | ±0.00006" | ±0.0015 | 3/8" | 0.197" | 1.825" | 4-48 | 120V AC | Two Prong | 6 1/2 | Yes | 543-562A | 00000000 | 0000000 |
0"-2.4" | 0-60.9 | 0.0001" 0.00005" 0.00002" | 0.0005 0.001 | ±0.0001" | ±0.0025 | 3/8" | 0.197" | 3.006" | 4-48 | 120V AC | Two Prong | 6 1/2 | Yes | 543-564A | 00000000 | 00000000 |
For use in wet environments, these indicators are IP53 rated for limited protection from dust and spraying water. A spring-loaded plunger retracts and extends to measure objects. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Bluetooth tool (sold separately) transmits measurement data via Bluetooth technology to smartphones, tablets, and PCs.
Measuring Range | Measuring Increments | Accuracy | Contact Point | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Manufacturer Model Number | Each | |
Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-796B | 000000 | 0000000 |
Lug and Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-796 | 000000 | 000000 |
Each | ||
1/4" Hole Dia. Lug Back | 00000000 | 00000 |
Spindle-Lifting Cord (12”) | 00000000 | 00000 |
USB Data Cable (80") | 000000 | 000000 |
10-Pin Data Cable (40”) | 00000000 | 00000 |
10-Pin Data Cable (80”) | 00000000 | 00000 |
Wireless Data Transmitter | 000000 | 000000 |
Wireless Data Receiver | 000000 | 000000 |
Bluetooth Tool | 0000000 | 000000 |
Replacement Battery | 00000000 | 0000 |
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. All are IP53 rated for limited protection from dust and spraying water. A spring-loaded plunger retracts and extends to measure objects. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cables (sold separately) connect the indicator to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from an indicator to your PC without being tethered by a cable.
Bluetooth tool (sold separately) transmits measurement data via Bluetooth technology to smartphones, tablets, and PCs.
Measuring Range | Measuring Increments | Accuracy | Contact Point | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Manufacturer Model Number | Each | |
Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | __ | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-796B | 000000 | 0000000 |
Lug and Stem Mount | |||||||||||||||||
0"-0.5" | 0-12.7 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 2 | 3/8" | 1/4" | 2 3/8" | 0.197" | 0.835" | 4-48 | Yes | Yes | 543-796 | 000000 | 000000 |
Each | ||
1/4" Hole Dia. Lug Back | 00000000 | 00000 |
Spindle-Lifting Cord (12”) | 00000000 | 00000 |
USB Data Cable (80") | 000000 | 000000 |
10-Pin Data Cable (40”) | 00000000 | 00000 |
10-Pin Data Cable (80”) | 00000000 | 00000 |
Wireless Data Transmitter | 000000 | 000000 |
Wireless Data Receiver | 000000 | 000000 |
Bluetooth Tool | 0000000 | 000000 |
Replacement Battery | 00000000 | 0000 |
Read measurements on an LCD. A spring-loaded plunger retracts and extends to measure objects. These indicators have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point, and a go/no-go operation indicates when measurements fall outside your set tolerance.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Each | |
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.03 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 1/8" | 1/4" | 4-48 | Yes | No | 000000 | 000000 |
0"-1" | 0-25.4 | 0.0005" | 0.01 | ±0.001" | ±0.03 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 1/8" | 1/4" | 4-48 | Yes | No | 000000 | 000000 |
Replacement Battery (1 per Pkg.) | 0000000 | Pkg. | 00000 |
A magnetic base provides a solid mount on metal surfaces. It has a V-grooved bottom for mounting on flat and curved surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the holder’s arm.
The indicator has a spring-loaded plunger that retracts and extends to measure objects. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point, and a go/no-go operation indicates when measurements fall outside your set tolerance.
Measuring Range | Measuring Increments | Accuracy | Contact Point | Base | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Head Dia. | Lg. | Mount. Thread Size | Lg. | Wd. | Magnetic Pull, lbs. | Arm Flexibility | Batteries Included | SPC Data Output | Each | |
Lug and Stem Mount | |||||||||||||||||||
0"-1" | 0-25 | 0.0005" | 0.01 | ±0.001" | ±0.03 | AGD Group 2 | 3/8" | 1/4" | 0.2" | 0.3" | 4-48 | 2 11/32" | 1 13/16" | 85 | Rigid | Yes | No | 0000000 | 0000000 |
Replacement Battery (1 per Pkg.) | 0000000 | Pkg. | 00000 |
Display readings in fractional increments as well as decimal increments. A spring-loaded plunger retracts and extends to measure objects. This indicator has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point, and a go/no-go operation indicates when measurements fall outside your set tolerance.
Measuring Range | Measuring Increments | Accuracy | Contact Point | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Fractional Increments | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Each | |
0"-1" | 0-25.4 | 0.0005" | 0.01 | 1/64" | ±0.001" | ±0.03 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 1/8" | 1/4" | 4-48 | Yes | No | 000000 | 000000 |
Replacement Battery (1 per Pkg.) | 0000000 | Pkg. | 00000 |
View measurements on an easy-to-read LCD. A spring-loaded plunger retracts and extends to measure objects. These indicators have a zero-set button that lets you start measuring at any point.
Indicators with a rotating dial face can be viewed from multiple angles.
Indicators with SPC data output can be connected to a PC or data processor.
Indicators with go/no-go operation indicate when measurements fall outside your set tolerance.
Indicators with zero-position memory, also known as absolute (ABS) positioning, retain the measuring position when the indicator is off.
USB data cable (sold separately) connects indicators with SPC data output directly to your PC.
10-pin data cable (sold separately) connects indicators with SPC data output to a miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data to your PC without being tethered by a cable.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Features | Mfr. Model No. | Each | |
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.188" | 1/4" | 4-48 | Zero-Set Button | 3900-5 | 00000000 | 0000000 |
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Features | Mfr. Model No. | Each | |
0"-1" | 0-25 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.203" | 1/4" | 4-48 | Zero-Set Button | 2900-3-1 | 00000000 | 0000000 |
0"-1" | 0-25 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.188" | 1/4" | 4-48 | Tolerance-Checking Go/No-Go Operation, Zero-Position Memory (ABS), Zero-Set Button | 2900-5-1 | 00000000 | 000000 |
0"-1" | 0-25 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 3 | 3/8" | 1/4" | 2 19/32" | 0.188" | 1/4" | 4-48 | Display Freeze, Function Lock, Tolerance-Checking Go/No-Go Operation, Zero-Position Memory (ABS), Zero-Set Button | F2730IQ | 0000000 | 000000 |
Each | ||
USB Data Cable for 2900 Series Model (6 ft.) | 0000000 | 0000000 |
USB Data Cable for F2730IQ Model (6 ft.) | 0000000 | 000000 |
10-Pin Data Cable for 2900 Series Model (5 1/2 ft.) | 0000000 | 000000 |
10-Pin Data Cable for F2730IQ Model (5 1/2 ft.) | 0000000 | 000000 |
Wireless Data Transmitter for 2900 Series Model | 0000000 | 000000 |
Wireless Data Transmitter for F2730IQ Model | 0000000 | 000000 |
Wireless Data Receiver | 0000000 | 00000000 |
Replacement Battery for 3900-5 Model | 00000000 | 0000 |
Pkg. | ||
---|---|---|
Replacement Battery for 2900 Series Model (1 per Pkg.) | 0000000 | 0000 |
Replacement Battery for F2730IQ Model (1 per Pkg.) | 0000000 | 0000 |
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. A spring-loaded plunger retracts and extends to measure objects. They have a zero-set button that lets you start measuring at any point.
Indicators with a rotating dial face can be viewed from multiple angles.
Indicators with SPC data output can be connected to a PC or data processor.
Indicators with go/no-go operation indicate when measurements fall outside your set tolerance.
Indicators with zero-position memory, also known as absolute (ABS) positioning, retain the measuring position when the indicator is off.
USB data cable (sold separately) connects indicators with SPC data output directly to your PC.
10-pin data cable (sold separately) connects indicators with SPC data output to a miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data to your PC without being tethered by a cable.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Features | Mfr. Model No. | Each | |
0"-0.5" | 0-12.7 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.188" | 1/4" | 4-48 | Zero-Set Button | 3900-5 | 00000000 | 0000000 |
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Features | Mfr. Model No. | Each | |
0"-1" | 0-25 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.203" | 1/4" | 4-48 | Zero-Set Button | 2900-3-1 | 00000000 | 0000000 |
0"-1" | 0-25 | 0.0005" | 0.01 | ±0.001" | ±0.025 | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0.188" | 1/4" | 4-48 | Tolerance-Checking Go/No-Go Operation, Zero-Position Memory (ABS), Zero-Set Button | 2900-5-1 | 00000000 | 000000 |
0"-1" | 0-25 | 0.00005" | 0.001 | ±0.0001" | ±0.0025 | AGD Group 3 | 3/8" | 1/4" | 2 19/32" | 0.188" | 1/4" | 4-48 | Display Freeze, Function Lock, Tolerance-Checking Go/No-Go Operation, Zero-Position Memory (ABS), Zero-Set Button | F2730IQ | 0000000 | 000000 |
Each | ||
USB Data Cable for 2900 Series Model (6 ft.) | 0000000 | 0000000 |
USB Data Cable for F2730IQ Model (6 ft.) | 0000000 | 000000 |
10-Pin Data Cable for 2900 Series Model (5 1/2 ft.) | 0000000 | 000000 |
10-Pin Data Cable for F2730IQ Model (5 1/2 ft.) | 0000000 | 000000 |
Wireless Data Transmitter for 2900 Series Model | 0000000 | 000000 |
Wireless Data Transmitter for F2730IQ Model | 0000000 | 000000 |
Wireless Data Receiver | 0000000 | 00000000 |
Replacement Battery for 3900-5 Model | 00000000 | 0000 |
Pkg. | ||
---|---|---|
Replacement Battery for 2900 Series Model (1 per Pkg.) | 0000000 | 0000 |
Replacement Battery for F2730IQ Model (1 per Pkg.) | 0000000 | 0000 |
This indicator comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. A spring-loaded plunger retracts and extends to measure objects. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point. This indicator can also measure TIR (total indicated runout), which determines the range of high and low spots of round parts. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the indicator directly to your PC.
10-pin data cable (sold separately) connects the indicator to a miniprocessor or multiplexer.
Measuring Range | Measuring Increments | Accuracy | Contact Point | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Industry Designation | Mount. Stem Dia. | Mount. Lug Hole Dia. | Dial Dia. | Head Dia. | Lg. | Mount. Thread Size | Batteries Included | SPC Data Output | Each | |
0"-0.4" | 0-10 | 0.00005" | 0.001 | ±0.00012" | ±0.003 | AGD Group 1 | 3/8" | 1/4" | 1.7" | 0.188" | 5/8" | 4-48 | Yes | Yes | 0000000 | 0000000 |
Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface. Rotate the dial face for viewing at multiple angles. All are IP65 rated for protection from dust and water jets. They have selectable measurement increments and can be displayed as digits or in a bar graph.
Measuring Range | Display Reading | Measuring Increments | Accuracy | Contact Point | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Inch | Metric | Inch | Metric, mm | Inch | Metric, mm | No. of Dovetail Mounts | Dial Dia. | Head Dia. | Lg. | Mounting Thread Size | Swivel Angle | Batteries Included | SPC Data Output | Each | |
0-0.02" | 0-0.5 | 0-40-0 | 0-1-0 | 0.00005" 0.0005" | 0.001 0.01 | ±0.0004" | ±0.01 | 1 | 1 1/2" | 0.08" | 1 7/16" | M1.6 | 270° | Yes | No | 0000000 | 0000000 |
0-0.03" | 0-0.8 | 0-40-0 | 0-1-0 | 0.00005" 0.0005" | 0.001 0.01 | ±0.0004" | ±0.01 | 1 | 1 1/2" | 0.08" | 1/2" | M1.4 | 270° | Yes | No | 0000000 | 000000 |
Replacement Battery | 0000000 | Each | 00000 |