For Use With For Use With |
|---|
Maximum Speed Maximum Speed |
|---|
|
Manufacturer Manufacturer |
|---|
Overall Length Overall Length |
|---|
Speed Control Switch Type Speed Control Switch Type |
|---|
|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
For Manufacturer For Manufacturer |
|---|
|
Airflow @ Pressure Airflow @ Pressure |
|---|
For Holding For Holding |
|---|
|
For Manufacturer Model Number For ManufacturerModel Number |
|---|
Switch Type Switch Type |
|---|
|
|
Light Duty Air-Powered Straight Grinders for Bits and Burs
Use these grinders for light, intermittent grinding, deburring, and finishing.
They are also known as die grinders.
Style A has a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Grinders | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Speed Control | Replacement Collets | ||||||||||||||
| Max. Speed, rpm | Power, hp | For Shank Dia. | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | O'all Lg. | Wt., lbs. | Each | Each | |||
| A | 19,000 | 1/2 | 1/4" | 4 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | __ | Lever | 6 1/2" | 1 1/8 | 0000000 | 000000 | 0000000 | 000000 |
| A | 22,000 | 2/5 | 1/4" | 13 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | __ | Lever | 5 3/4" | 1 1/4 | 0000000 | 00000 | 0000000 | 00000 |
| A | 22,000 | 1/2 | 1/4" | 4 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | __ | Lever | 6 3/4" | 1 3/8 | 0000000 | 00000 | 0000000 | 00000 |
| B | 70,000 | 1/10 | 1/8" | 5.3 cfm @ 90 psi | Rear | NPT | 1/4 | 1/4" | Variable | Ring | 5 3/8" | 1/4 | 0000000 | 000000 | 0000000 | 00000 |
| 1/4" to 1/8" Collet Reducer Bushing | 00000000 | Each | 00000 |
Light Duty Air-Powered Straight
Grinder Kits for Bits and Burs
Kits include a light duty grinder and a variety of tools for intermittent grinding on most metals.
They are also known as die grinders.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Use With | Max. Speed, rpm | Power, hp | For Shank Dia. | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Switch Type | O'all Lg. | Wt., lbs. | Includes | Each | |
| Grinding Bits | 22,000 | 1/2 | 1/4" | 4 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | Lever | 6 3/4" | 1 3/8 | Light Duty Grinder, Aluminum Oxide Grinding Bits, 1/8" Shank Diameter (5), Aluminum Oxide Grinding Bits, 1/4" Shank Diameter (5), Reducing Bushing 1/4" to 1/8", Collet, Wrenches (2), Plastic Case | 0000000 | 000000 |
| Grinding Burs | 22,000 | 1/2 | 1/4" | 4 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | Lever | 6 3/4" | 1 3/8 | Light Duty Grinder, Solid Carbide Double-Cut Burs (7), Collet, Wrenches (2), Plastic Case | 0000000 | 000000 |
Medium Duty Air-Powered Straight
Grinders for Bits and Burs
More durable than our Light Duty Grinders, these are designed for more frequent use.
They are also known as die grinders. They have a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Grinders | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Replacement Collets | |||||||||||||||
| Max. Speed, rpm | Power, hp | For Shank Dia. | Chuck Size | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Speed Control Switch Type | O'all Lg. | Wt., lbs. | Each | Each | |||
| A | 24,000 | 1/2 | 1/4" | __ | 10.5 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | Lever | 5 3/4" | 1 1/4 | 0000000 | 0000000 | 0000000 | 000000 |
| B | 25,000 | 1/2 | 1/4" | 1/4" | 5 cfm @ 90 psi | Front | NPT | 1/4 | 3/8" | Lever | 6 1/2" | 1 1/4 | 0000000 | 000000 | 000000 | 00 |
| C | 22,000 | 0.9 | 1/4" | __ | 5.5 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | Lever | 12" | 2 1/2 | 00000000 | 000000 | 00000000 | 00000 |
| 1/4" to 1/8" Collet Reducer Bushing | 00000000 | Each | 00000 |
Heavy Duty Air-Powered Straight
Grinders for Bits and Burs
High-quality bearings ensure long spindle life, even when grinders are used continuously.
They are also known as die grinders.
Styles A and B have a lever lock to prevent accidental start-up. Style C is a high-speed, lightweight, pencil-sized tool.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Grinders | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Speed Control | Replacement Collets | ||||||||||||||
| Max. Speed, rpm | Power, hp | For Shank Dia. | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | O'all Lg. | Wt., lbs. | Each | Each | |||
| A | 25,000 | 1 | 1/4" | 25 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | __ | Lever | 13 1/8" | 2 3/4 | 0000000 | 0000000 | 0000000 | 000000 |
| B | 18,000 | 3/5 | 1/4" | 30 cfm @ 90 psi | Rear | NPT | 1/4 | 5/16" | __ | Lever | 6 7/8" | 1 1/2 | 00000000 | 000000 | 00000000 | 00000 |
| B | 18,000 | 1 | 1/4" | 14 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | __ | Lever | 8 3/8" | 1 5/8 | 0000000 | 000000 | 0000000 | 00000 |
| B | 25,000 | 0.3 | 1/4" | 16 cfm @ 90 psi | Rear | NPT | 1/4 | 1/4" | __ | Lever | 6" | 3/4 | 00000000 | 000000 | 00000000 | 00000 |
| B | 25,000 | 2/5 | 1/4" | 20 cfm @ 90 psi | Front, Rear | NPT | 1/4 | 3/8" | __ | Lever | 6 1/8" | 3/4 | 0000000 | 000000 | 0000000 | 00000 |
| B | 25,000 | 1 | 1/4" | 25 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | __ | Lever | 8 3/8" | 1 5/8 | 0000000 | 000000 | 0000000 | 00000 |
| B | 35,000 | 2/5 | 1/4" | 25 cfm @ 90 psi | Front, Rear | NPT | 1/4 | 3/8" | __ | Lever | 6 1/8" | 3/4 | 0000000 | 000000 | 0000000 | 00000 |
| C | 60,000 | 1/10 | 1/8" | 9 cfm @ 90 psi | Rear | NPT | 1/8 | 3/16" | Variable | Ring | 5 7/8" | 3/8 | 0000000 | 000000 | 0000000 | 00000 |
Maintenance-Free Heavy Duty Air-Powered
Straight Grinders for Bits and Burs
Powered by an air-turbine, these grinders don’t require oil or have gears to maintain. They have high-quality bearings for long spindle life, even when used continuously.
Grinders sustain constant speed under load, operate at high speeds for long cutting-tool life, and are lightweight to reduce operator fatigue. They are also known as die grinders.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Electric Straight Grinders for Bits and Burs
Also known as die grinders.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
| Max. Speed, rpm | For Shank Dia. | Double Insulated | Voltage | Current, A | Electrical Connection | Frequency, Hz | Switch Type | Speed Control Type | O'all Lg. | Wt., lbs. | Specifications Met | Manufacturer | Manufacturer Model No. | Each | ||
| A | 21,000 | 1/4" | Yes | 120V AC | 4.5 | Plug | __ | Toggle | Fixed | 13 1/2" | 4 1/2 | UL Listed, C-UL Listed, CSA Certified, OSHA Standards | Milwaukee | 5192 | 0000000 | 0000000 |
| B | 22,000 | 1/8", 1/4" | Yes | 120V AC | 0.7 | Plug | 60 | Toggle | Fixed | 10" | 4 | UL Listed | Dumore | 10-355V | 00000000 | 000000 |
| C | 25,000 | 1/4" | Yes | 120V AC | 3.5 | Plug | __ | Slide | Fixed | 14 1/8" | 3 3/4 | UL Listed | Makita | GD0601 | 0000000 | 000000 |
| D | 25,000 | 1/4" | Yes | 120V AC | 4.2 | Plug | 60 | Paddle | Fixed | 14" | 3 3/4 | UL Listed, CSA Certified | DeWalt | DWE4887 | 0000000 | 000000 |
Dremel Electric and Cordless Straight Grinder Kits
Grind, sand, finish, and polish with these versatile kits.
They come with a light duty Dremel grinder that accepts a multitude of accessories. Grinders have a shaft lock for easy tool changes.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
| Manufacturer Model No. | Max. Speed, rpm | For Shank Dia. | Switch Type | Speed Control Type | Voltage | Current, A | Electrical Connection | O'all Lg. | Wt., lbs. | Specifications Met | Includes | Each | |
| 100-N/7 | 35,000 | 1/8" | Slide | Fixed | 120V AC | 1.2 | Plug | 7 1/2" | 1 1/8 | UL Listed, CSA Certified | Light Duty Grinder, Seven Assorted Accessories | 000000 | 000000 |
| 3000-1/24 | 32,000 | 1/8" | Slide | Variable | 120V AC | 1.2 | Plug | 7 1/2" | 1 1/4 | CSA Certified | Light Duty Grinder, 24 Assorted Accessories, Plastic Storage Case | 0000000 | 00000 |
| 4000-2/30 | 35,000 | 1/8" | Slide | Variable | 120V AC | 1.6 | Plug | 8 1/2" | 1 1/4 | CSA Certified | Light Duty Grinder, 30 Assorted Accessories, Circle Cutter, Plastic Storage Case | 0000000 | 000000 |
| Manufacturer Model No. | Max. Speed, rpm | For Shank Dia. | Switch Type | Speed Control Type | Batteries Included | O'all Lg. | Wt., lbs. | Specifications Met | Includes | Each | |
| 8050-N/18 | 25,000 | 1/32", 1/16", 3/32", 1/8" | Push Button | Variable | Yes | 8" | 1/2 | CSA Certified | 18 Assorted Accessories, 3.75-Hour Charger, Light Duty Grinder | 00000000 | 000000 |
| 8220-1/28 | 35,000 | 1/32", 1/16", 3/32", 1/8" | Slide | Variable | Yes | 6" | 1 1/2 | CSA Certified | 28 Assorted Accessories, 1-Hour Charger, Cutting Guide Attachment, Light Duty Grinder, Plastic Storage Case | 0000000 | 000000 |
Dremel Accessory Kits
| Total No. of Pieces | For Manufacturer Model No. | Includes | Each | |
| 110 | 100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8220-1/28 | 19 Sanding Bands, 26 Cutoff Wheels, 30 Sanding Discs, Dressing Stone, Eight Felt Polishing Wheels, Four Grinding Stones, High Speed Cutter, Plastic Storage Case, Polishing Compound, Wrench | 0000000 | 000000 |
Dremel Right-Angle Attachments
Convert your straight grinder into an angle grinder.
Quick-connect system allows attachment without tools.
| Lg. | For Manufacturer Model No. | Each | |
| 3" | 100-N/7, 285, 3000-1/24, 3965-02, 3981-01, 4000-2/30, 7800-01, 7800-02, 8000, 8200, 8220-1/28 | 0000000 | 000000 |
Dremel Flexible Shafts
| Handpiece Dia. | Shaft Lg. | Bend Radius | For Manufacturer Model No. | Includes | Each | |
| 3/4" | 36" | 5" | 100-N/7, 285, 3000-1/24, 3965-02, 3981-01, 4000-2/30, 7800-01, 7800-02, 8000, 8200, 8220-1/28 | Handpiece | 000000 | 000000 |
Dremel Drill Press Attachments
| For Manufacturer Model No. | Each | |
| 100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200 | 00000000 | 000000 |
Dremel Safety Shields
This 360° shield closes automatically.
| For Max. Wheel Dia. | For Manufacturer Model No. | Includes | Each | |
| 1 1/2" | 100-N/7, 285, 3000-1/24, 3965-02, 3981-01, 4000-2/30, 7800-01, 7800-02, 8000, 8200, 8220-1/28 | 1 1/2" Cutoff Wheel | 0000000 | 000000 |
Dremel Tool Hangers
Screw these hangers onto your workbench.
| Ht. Range | For Manufacturer Model No. | Includes | Each | |
| 26" to 41" | 100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8200 | Fasteners | 0000000 | 000000 |
Electric Flexible-Shaft Grinders for Bits and Burs
The bendable shaft with handpiece lets these grinders operate smoothly with less vibration, noise, and heat than other hand-held grinders.
For proper operation, clean and lubricate shafts every 50 hours of use.
3/4" diameter collet handpiece is well suited for fine, detailed applications.
1" diameter collet handpiece has a tapered front grip.
1" diameter chuck handpiece has a three-jaw chuck that accepts bits and burs with shank diameters up to 5/32".
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Shaft | Speed Control | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shank Dia. | Handpiece Dia. | Includes | Duty Cycle | Max. Speed, rpm | Power, hp | Voltage | Current, A | Electrical Connection | Dia. | Lg. | Switch Type | Type | Switch Type | Each | |
Bench Style | |||||||||||||||
| 3/32", 1/8" | 3/4" | 3/32" Collet, 1/8" Collet | Intermittent | 18,000 | 1/6 | 120V AC | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Dial | 0000000 | 0000000 |
| 3/32", 1/8", 5/32" | 1" | 5/32" Chuck, Chuck Key | Intermittent | 18,000 | 1/6 | 120V AC | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Dial | 0000000 | 000000 |
| 3/32", 1/8", 5/32" | 1" | 5/32" Chuck, Chuck Key | Continuous | 15,000 | 1/3 | 120V AC | 3.5 | Plug | 3/16" | 63" | Toggle | Variable | Foot Pedal | 0000000 | 000000 |
| 3/32", 1/8", 1/4" | 1" | 3/32" Collet, 1/8" Collet, 1/4" Collet, Lock Pin, Wrench | Intermittent | 18,000 | 1/6 | 120V AC | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Dial | 0000000 | 000000 |
| 3/32", 1/8", 1/4" | 1" | 3/32" Collet, 1/8" Collet, 1/4" Collet, Lock Pin, Wrench | Continuous | 15,000 | 1/3 | 120V AC | 3.5 | Plug | 3/16" | 63" | Toggle | Variable | Foot Pedal | 0000000 | 000000 |
Hanging Style | |||||||||||||||
| 3/32", 1/8" | 3/4" | 3/32" Collet, 1/8" Collet | Intermittent | 18,000 | 1/6 | 120V AC | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Foot Pedal | 0000000 | 000000 |
| 3/32", 1/8", 5/32" | 1" | 5/32" Chuck, Chuck Key | Intermittent | 18,000 | 1/6 | 120V AC | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Foot Pedal | 0000000 | 000000 |
| 3/32", 1/8", 5/32" | 1" | 5/32" Chuck, Chuck Key | Continuous | 15,000 | 1/3 | 120V AC | 3.5 | Plug | 3/16" | 63" | Toggle | Variable | Foot Pedal | 0000000 | 000000 |
| 3/32", 1/8", 1/4" | 1" | 3/32" Collet, 1/8" Collet, 1/4" Collet, Lock Pin, Wrench | Intermittent | 18,000 | 1/6 | 120V AC | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Foot Pedal | 0000000 | 000000 |
| 3/32", 1/8", 1/4" | 1" | 3/32" Collet, 1/8" Collet, 1/4" Collet, Lock Pin, Wrench | Continuous | 15,000 | 1/3 | 120V AC | 3.5 | Plug | 3/16" | 63" | Toggle | Variable | Foot Pedal | 0000000 | 000000 |
| Each | ||
Replacement Handpieces and Flexible Shafts | ||
|---|---|---|
| 39" Replacement Flexible Shaft | 0000000 | 000000 |
| 63" Replacement Flexible Shaft | 0000000 | 00000 |
| 3/4" Dia. Replacement Handpiece for Intermittent-Duty Grinders | 0000000 | 00000 |
| 1" Dia. Replacement Handpiece for Intermittent-Duty Grinders | 0000000 | 00000 |
| 1" Dia. Replacement Handpiece for Continuous-Duty Grinders | 0000000 | 00000 |
| Replacement Chuck Handpiece for Intermittent Duty Grinders | 0000000 | 00000 |
| Replacement Chuck Handpiece for Continuous-Duty Grinders | 0000000 | 00000 |
Optional Accessories | ||
| Motor Hanger | 0000000 | 00000 |
| Seven-Piece Collet Set for 1" Dia. Handpieces | 0000000 | 00000 |
Flexible-Shaft Grinding Attachments
Convert your bench-mount motor or drill to a flexible-shaft grinder.
| Max. Speed, rpm | Shaft Lg. | Bend Radius | For Shaft Dia. | Includes | Each | |
| 15,000 | 34" | 4" | 1/4" | One each: 3/32" Collet, 1/8" Collet, 1/4" Collet, Collet Wrench, Handpiece, Lock Pin | 0000000 | 0000000 |
Medium Duty Air-Powered Angle Grinders for Bits and Burs
More durable than our Light Duty Grinders, these are designed for more frequent use.
They are also known as die grinders.
Grinders have an angled head for accessing hard-to-reach places and a lever lock to prevent accidental start-up.
Style B has a 60° angled head to get into spots a right-angle grinder can't reach and a soft grip to reduce vibration.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Speed, rpm | Power, hp | For Shank Dia. | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Speed Control Switch Type | Head Angle | O'all Lg. | Wt., lbs. | Each | ||
| A | 20,000 | 0.33 | 1/4" | 6 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | Lever | 90° | 7" | 1 1/4 | 0000000 | 0000000 |
| A | 25,000 | 0.3 | 1/4" | 3 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | Lever | 90° | 6" | 1 1/8 | 0000000 | 000000 |
| B | 18,000 | 1/2 | 1/4" | 3.3 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | Lever | 60° | 7 3/4" | 1 3/4 | 0000000 | 000000 |
| 1/4" to 1/8" Collet Reducer Bushing | 00000000 | Each | 00000 |
Light Duty Air-Powered Angle Grinders for Bits and Burs
Use these grinders for occasional light grinding, deburring, and finishing.
They are also known as die grinders.
Grinders have an angled head for accessing hard-to-reach places and a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Speed, rpm | Power, hp | For Shank Dia. | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Speed Control Switch Type | Head Angle | O'all Lg. | Wt., lbs. | Each | |
| 21,000 | 1/4 | 1/4" | 6 cfm @ 90 psi | Front | NPT | 1/4 | 3/8" | Lever | 90° | 5 1/4" | 1 | 0000000 | 000000 |
| 25,000 | 0.3 | 1/4" | 4 cfm @ 90 psi | Rear | NPT | 1/4 | 3/8" | Lever | 90° | 6 1/8" | 1 1/8 | 0000000 | 00000 |
| 1/4" to 1/8" Collet Reducer Bushing | 00000000 | Each | 00000 |
Light Duty Air-Powered Angle
Grinder Kits for Bits and Burs
Kit includes a light duty grinder and an assortment of tools for occasional grinding, deburring, and finishing.
It has an angled head for accessing hard-to-reach places and a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Speed, rpm | Power, hp | For Shank Dia. | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Speed Control Switch Type | O'all Lg. | Wt., lbs. | Includes | Each | |
| 21,000 | 1/4 | 1/4" | 6 cfm @ 90 psi | Front | NPT | 1/4 | 3/8" | Lever | 5 1/4" | 1 | Light Duty Grinder, 1/8" Shank Diameter Grinding Bits (5), 1/4" Shank Diameter Grinding Bits (5), 1/8" Collet, Wrenches (2), Plastic Case | 0000000 | 000000 |
| 1/4" to 1/8" Collet Reducer Bushing | 00000000 | Each | 00000 |
Heavy Duty Air-Powered Angle Grinders for Bits and Burs
With high-quality bearings and collets for long spindle life, these grinders are rated for continuous use to take on tough jobs.
They are also known as die grinders.
Grinders have an angled head for accessing hard-to-reach places and a lever lock to prevent accidental start-up. Style A has sealed bearings to minimize maintenance. Style B has heavy duty gears and precision collets for smooth operation and long tool life; exhaust can be changed from rear to front. Style C is a high-speed, lightweight, pencil-sized tool.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Speed, rpm | Power, hp | For Shank Dia. | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Speed Control Switch Type | Head Angle | O'all Lg. | Wt., lbs. | Each | ||
| A | 12,000 | 2/5 | 1/4" | 22 cfm @ 90 psi | Front | NPT | 1/4 | 1/4" | Lever | 90° | 6 5/8" | 1 1/8 | 00000000 | 0000000 |
| A | 20,000 | 2/5 | 1/4" | 22 cfm @ 90 psi | Front | NPT | 1/4 | 1/4" | Lever | 90° | 6 5/8" | 1 1/8 | 00000000 | 000000 |
| B | 12,000 | 1 | 1/4" | 17 cfm @ 90 psi | Front, Rear | NPT | 3/8 | 3/8" | Lever | 90° | 9" | 3 1/2 | 0000000 | 000000 |
| B | 20,000 | 2/5 | 1/4" | 25 cfm @ 90 psi | Front, Rear | NPT | 1/4 | 3/8" | Lever | 90° | 6" | 1 1/8 | 0000000 | 000000 |
| C | 80,000 | 1/10 | 1/8" | 9 cfm @ 90 psi | Rear | NPT | 1/8 | 3/16" | Ring | 98° | 5 1/2" | 3/8 | 0000000 | 000000 |
Collets for Air-Powered Bit and Bur Grinders
Collets | 1/4" to 1/8" Reducing Collet Bushing | |||||
|---|---|---|---|---|---|---|
| Size | Manufacturer Model Number | For Manufacturer Model Number | Each | Each | ||
For Air Turbine Grinder | ||||||
| 1/8" | 12141 | 0145, 0190, 200, 201, 32060 | 0000000 | 000000 | 000000 | 00 |
For Chicago Pneumatic Grinder | ||||||
| 1/4" | C138727 | CP860, CP872 | 0000000 | 00000 | 00000000 | 00000 |
For Dotco Grinder | ||||||
| 3/32" | 102 | 1040400-08, 10R0401-18, 10R401-16, 10R9000-08, 12R0400-18, 12R0401-16, 12R9180-08 | 0000000 | 00000 | 000000 | 00 |
| 1/8" | 01-0100 | 12R0380-18 | 0000000 | 00000 | 000000 | 00 |
| 1/8" | 100PT | 12R0400-18 | 0000000 | 00000 | 000000 | 00 |
| 1/4" | 208 | 12L2082-01 | 00000000 | 00000 | 00000000 | 0000 |
| 1/4" | 308PT | 12L1082-36 | 00000000 | 00000 | 00000000 | 0000 |
For Ingersoll Rand Grinder | ||||||
| 1/4" | DG110-700-G4 | G1H250RG4, G1H350RG4 | 0000000 | 00000 | 00000000 | 0000 |
| 1/4" | G160HD-700-1/4 | G2H180RG4, G2H250RG4, G2X250RG4 | 0000000 | 00000 | 00000000 | 0000 |
For Rockford Grinder | ||||||
| 1/4" | R3420-04 | R3420 | 0000000 | 00000 | 00000000 | 0000 |
For Sioux Tools Grinder | ||||||
| 1/8" | 68736 | 5979A | 0000000 | 00000 | 000000 | 00 |
| 1/4" | SP66459 | 5054A-19K | 0000000 | 00000 | 00000000 | 0000 |
For St. Louis Pneumatic Grinder | ||||||
| 1/4" | 3063 | SLP-83150 | 0000000 | 00000 | 00000000 | 0000 |
For Universal Tool Grinder | ||||||
| 1/4" | 892233 | UT8728E | 00000000 | 00000 | 00000000 | 0000 |
Collets for Dremel Bit and Bur Grinders
| Size | Manufacturer | Manufacturer Model Number | For Manufacturer Model Number | Each | |
For Dremel Grinder | |||||
|---|---|---|---|---|---|
| 1/32" | Bosch | 483 | 100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200 | 00000000 | 00000 |
| 1/16" | Bosch | 482 | 100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200 | 00000000 | 0000 |
| 3/32" | Bosch | 481 | 100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8050-N/18, 8100-N/21, 8200, 8220-1/28 | 00000000 | 0000 |
| 1/8" | Bosch | 480 | 100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8050-N/18, 8100-N/21, 8200, 8220-1/28 | 00000000 | 0000 |
Collets for Electric Bit and Bur Grinders
| Size | Manufacturer Model Number | For Manufacturer Model Number | Each | |
For DeWalt Grinder | ||||
|---|---|---|---|---|
| 1/4" | 4287/DW887 | DW887 | 0000000 | 000000 |
For Dumore Grinder | ||||
| 1/8" | 487-0066 | 10-355V | 00000000 | 00000 |
| 1/8" | 503-0012 | 10-355V | 00000000 | 00000 |
| 1/4" | 487-0067 | 10-355V | 00000000 | 00000 |
For Makita Grinder | ||||
| 1/8" | 763626-6 | GD0601 | 0000000 | 00000 |
| 1/4" | 763625-8 | GD0601 | 0000000 | 00000 |
For Milwaukee Grinder | ||||
| 1/8" | 48-66-0965 | 5192, 5194, 5196 | 0000000 | 00000 |
| 1/4" | 48-66-0975 | 5192, 5194, 5196 | 0000000 | 00000 |