For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
For Hole Diameter For Hole Diameter |
|---|
|
|
|
Rate Rate |
|---|
Individual/Set Individual/Set |
|---|
|
Die Holder Material Die Holder Material |
|---|
|
For Use With For Use With |
|---|
|
|
Die Spring Stock
Keep these springs on hand so you can cut the right length whenever you need it.
As you squeeze a die spring, it gets harder to push. Rate is the amount of force required for every inch of compression. The higher the rate, the harder it is to compress the spring.
To determine the rate of a cut spring, first multiply the spring’s original length by the rate given, then divide the result by the cut length (in inches).
For technical drawings and 3-D models, click on a part number.
Wire | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Hole Dia. | For Shaft Dia. | Lg. | Thick. | Wd. | Rate, lbs./in. | Material | End Type | Each | |
| 7/16" | 1/4" | 36" | 0.063" | 0.063" | 2.95 | Spring-Tempered Steel | Open | 0000000 | 000000 |
| 1/2" | 1/4" | 36" | 0.094" | 0.094" | 14.11 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 9/16" | 5/16" | 36" | 0.094" | 0.094" | 9.57 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 9/16" | 3/8" | 36" | 0.063" | 0.063" | 1.41 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 11/16" | 3/8" | 36" | 0.125" | 0.125" | 20.46 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 11/16" | 7/16" | 36" | 0.094" | 0.094" | 5.22 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 11/16" | 1/2" | 36" | 0.063" | 0.063" | 0.82 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 3/4" | 3/8" | 36" | 0.093" | 0.156" | 12.58 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 13/16" | 1/2" | 36" | 0.125" | 0.125" | 11.63 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 13/16" | 9/16" | 36" | 0.094" | 0.094" | 2.85 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 15/16" | 1/2" | 36" | 0.188" | 0.188" | 53.76 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 15/16" | 5/8" | 36" | 0.125" | 0.125" | 7.35 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 1" | 1/2" | 36" | 0.109" | 0.219" | 16.58 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 1 1/16" | 5/8" | 36" | 0.188" | 0.188" | 39.94 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 1 1/16" | 3/4" | 36" | 0.125" | 0.125" | 5.84 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 1 3/16" | 3/4" | 36" | 0.188" | 0.188" | 29.04 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 1 3/16" | 13/16" | 36" | 0.156" | 0.156" | 11.5 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 1 5/16" | 7/8" | 36" | 0.188" | 0.188" | 20.13 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 1 1/2" | 3/4" | 36" | 0.187" | 0.313" | 49.16 | Spring-Tempered Steel | Open | 0000000 | 00000 |
| 1 13/16" | 1 1/16" | 36" | 0.313" | 0.313" | 103.58 | Spring-Tempered Steel | Open | 0000000 | 000000 |
| 1 13/16" | 1 1/8" | 36" | 0.281" | 0.281" | 58.1 | Spring-Tempered Steel | Open | 0000000 | 000000 |
| 2" | 1" | 36" | 0.218" | 0.438" | 63.41 | Spring-Tempered Steel | Open | 0000000 | 000000 |
| 2 1/16" | 1 5/16" | 36" | 0.313" | 0.313" | 69.2 | Spring-Tempered Steel | Open | 0000000 | 000000 |
| 2 5/16" | 1 9/16" | 36" | 0.313" | 0.313" | 53.83 | Spring-Tempered Steel | Open | 0000000 | 000000 |
Wrenches for Round Dies
Also known as die stocks, these wrenches grip round dies so you can turn them by hand. All include set screws for securing the die.
| For Die OD | Lg. | Handle Material | Die Holder Material | Includes | Each | |
| 13/16" | 7" | Steel | Steel | Three Set Screws | 00000000 | 00000 |
| 1" | 8" | Steel | Steel | Three Set Screws | 00000000 | 0000 |
| 1 1/2" | 12 1/2" | Steel | Steel | Three Set Screws | 00000000 | 00000 |
| 2" | 15" | Steel | Steel | Three Set Screws | 00000000 | 00000 |
| 2 1/2" | 20" | Steel | Steel | Three Set Screws | 00000000 | 00000 |
| 3" | 22" | Steel | Steel | Three Set Screws | 00000000 | 00000 |
| 4" | 29" | Steel | Steel | Three Set Screws | 00000000 | 000000 |
| 5" | 33" | Steel | Steel | Three Set Screws | 00000000 | 000000 |
Wrenches for Hex Dies
Use these wrenches to turn hex-shaped dies by hand. They're also known as die stocks. An included set screw secures the die.
Wrenches for 1" dies also hold round dies.
| For Die Shape | For Die Wd. | For Die OD | Lg. | Handle Material | Die Holder Material | Includes | Each | |
| Hex | 5/8" | __ | 4 7/8" | Cast Zinc | Cast Zinc | One Set Screw | 0000000 | 00000 |
| Hex | 1 7/16" | __ | 14 11/16" | Aluminum | Cast Zinc | One Set Screw | 0000000 | 00000 |
| Hex | 1 13/16" | __ | 22 1/2" | Aluminum | Cast Zinc | One Set Screw | 0000000 | 00000 |
| Hex, Round | 1" | 1" | 10" | Cast Zinc | Cast Zinc | One Set Screw | 0000000 | 00000 |
Round Die to Hex Die Adapters
Convert round dies to hex dies for use with a conventional wrench. An included set screw secures the die.
Tap and Die Wrench Sets
Switch from internal to external threading with interchangeable tap and die adapters. Use them with the included ratcheting wrench. The attachable sliding T-handle moves from side to side for accessing tight spaces.
| Includes | Container Type | Each | |
| Tap Adapter for Tap Sizes No. 4 to No. 12, Tap Adapter for Tap Sizes 1/4" to 1/2", Die Adapter for 1" Wide Hex Dies, Ratcheting Wrench with Attachable Sliding T-Handle | Plastic Case | 0000000 | 000000 |