Screw Thread Dies
Use these dies to create external threads on bolts, studs, and rods. They're shaped for use with a die wrench. Loosen and tighten the die with the included set screw to adjust thread depth.
Carbon steel dies are for use on most metal and plastic. Uncoated high-speed steel dies last longer than carbon steel dies when cutting similar material.
Thread Repairing Dies
Restore rusted and damaged screw threads. These dies are hex shaped for use with conventional wrenches.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Material | Each | |
UNC Right-Hand Thread | ||||
---|---|---|---|---|
9/16"-12 | 1 1/16" | Carbon Steel | 0000000 | 000000 |
Thread Repairing Dies for Tight Spots
A smaller width than standard hex dies lets you repair rusted and damaged threads in tight spaces. These dies are hex shaped for use with conventional wrenches.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Material | Each | |
UNC Right-Hand Thread | ||||
---|---|---|---|---|
9/16"-12 | 7/8" | Carbon Steel | 00000000 | 00000 |
Left-Hand Thread Repairing Dies
Repair rusted and damaged left-hand screw threads. These dies are hex shaped for use with conventional wrenches.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Material | Each | |
UNC Left-Hand Thread | ||||
---|---|---|---|---|
9/16"-12 | 1 1/16" | Carbon Steel | 0000000 | 000000 |
Left-Hand Thread Repairing Dies for Tight Spots
With a smaller width than regular hex dies, these dies are suitable for repairing rusted and damaged left-hand threads in tight spaces. They're hex shaped for use with conventional wrenches.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Material | Each | |
UNC Left-Hand Thread | ||||
---|---|---|---|---|
9/16"-12 | 7/8" | Carbon Steel | 00000000 | 00000 |
Tap and Die Sets
Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic. Hex-shaped dies are for thread repair and can be used with conventional wrenches.
Carbon steel taps are for thread repair and occasional tapping.
High-speed steel taps and dies last longer than carbon steel when used on similar material.
Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes
Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper-chamfer taps. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
No. of Pieces | Tap Sizes Included | Tap Chamfer Type | Die Shape | Die Sizes Included | Wd. | Container Type | Includes | Each | |
Carbon Steel Taps and Dies | |||||||||
---|---|---|---|---|---|---|---|---|---|
Right-Hand Thread | |||||||||
53 | 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14,; 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, and 3/4"-16 | Plug, Taper | Hex | 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16 | 1", 1 7/16" | Plastic Case | Die Wrench (2), Screwdriver, Tap Wrench (3), Thread Gauge | 0000000 | 0000000 |
65 | 4-40, 6-32, 8-32, 10-24, 10-32, 12-24,; 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24,; 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20,; 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16,; 7/8"-9, 7/8"-14, 1"-8, and 1"-14 | Plug, Taper | Hex | 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-14, 7/8"-9, 1"-8, 1"-14 | 5/8", 1", 1 7/16", 1 13/16" | Plastic Case | Die Wrench (4), Tap Wrench (4), Thread Gauge | 00000000 | 000000 |
High-Speed Steel Taps and Dies | |||||||||
Right-Hand Thread | |||||||||
58 | 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14,; 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, and 3/4"-16 | Plug | Hex | 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16 | 1", 1 7/16" | Plastic Case | Die Wrench (2), Extractor (5), Screwdriver, Tap Wrench (3), Thread Gauge | 00000000 | 000000 |
Thread Repairing Tap, Die, and File Sets
Repair screw threads in a wide range of sizes. The dies are hex shaped for use with conventional wrenches. The taps have a square shank that's compatible with tap wrenches and tap holders for drill presses and drilling machines. With a plug chamfer, all taps have 3-5 chamfered threads and are suitable for thread repair in both through holes and closed-end holes.
Number of Pieces | Tap Sizes Included | Die Sizes Included | File Sizes Included | Container Type | Each | |
Carbon Steel | ||||||
---|---|---|---|---|---|---|
Right-Hand Thread | ||||||
53 | 1/4”-20, 1/4”-28, 5/16”-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16”-12, 9/16"-18,; M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, and M12 × 1.75 mm | 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 3/4"-20, M6 × 1.00 mm, M6 × 1.25 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M8 × 1.50 mm, M10 × 1.00 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, M20 × 1.50 mm | For 11 to 24 threads per inch, For 0.8 to 3 mm thread pitches | Plastic Case | 00000000 | 0000000 |
Thread Repairing Die Sets
Repair rusted or damaged external threads in a variety of sizes. These dies are hex shaped for use with conventional wrenches.
Number of Pieces | Thread Direction | Die Sizes Included | Each | |
Plastic Pouch | ||||
---|---|---|---|---|
Carbon Steel | ||||
7 | Right Hand | 1/4"-20 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 5/8"-11 (15/16" Wd.) | 0000000 | 000000 |
7 | Left Hand | 1/4"-20 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 5/8"-11 (15/16" Wd.) | 0000000 | 00000 |
8 | Right Hand | 1/4"-20 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 5/8"-11 (15/16" Wd.), 3/4"-10 (1 1/8" Wd.) | 0000000 | 00000 |
Plastic Case | ||||
Carbon Steel | ||||
8 | Right Hand | 1/4"-20 (19/32" Wd.), 5/16"-18 (11/16" Wd.), 3/8"-16 (25/32" Wd.), 7/16”-14 (7/8" Wd.), 1/2"-13 (1 1/16" Wd.), 9/16"-12 (1 1/16" Wd.), 5/8"-11 (1 1/4" Wd.), 3/4"-10 (1 7/16" Wd.) | 000000 | 000000 |
10 | Right Hand | 1/4"-20 (19/32" Wd.), 5/16"-18 (11/16" Wd.), 3/8"-16 (25/32" Wd.), 7/16"-14 (7/8" Wd.), 1/2"-13 (1 1/16" Wd.), 9/16"-12 (1 1/16" Wd.), 5/8"-11 (1 1/4" Wd.), 3/4"-10 (1 7/16" Wd.), 7/8"-9 (1 5/8" Wd.), 1"-8 (1 13/16" Wd.) | 000000 | 000000 |
20 | Right Hand | 1/4"-20 (19/32" Wd.), 1/4"-28 (19/32" Wd.), 5/16"-18 (11/16" Wd.), 5/16"-24 (11/16" Wd.), 3/8"-16 (25/32" Wd.), 3/8"-24 (25/32" Wd.), 7/16"-14 (7/8" Wd.), 7/16"-20 (7/8" Wd.), 1/2"-13 (1 1/16" Wd.), 1/2"-20 (1 1/16" Wd.), 9/16"-12 (1 1/16" Wd.), 9/16"-18 (1 1/16 Wd."), 5/8"-11 (1 1/4" Wd.), 5/8"-18 (1 1/4" Wd.), 3/4"-10 (1 7/16" Wd.), 3/4"-16 (1 7/16" Wd.), 7/8"-9 (1 5/8 Wd."), 7/8"-14 (1 5/8" Wd.), 1"-8 (1 13/16" Wd.), 1"-14 (1 13/16" Wd.) | 000000 | 000000 |
Two-Piece Thread Repairing Die Sets
Clamp these dies around your workpiece, so you can start thread repair anywhere along the length of a bolt, stud, or rod. They're hex shaped for use with conventional wrenches.
Number of Pieces | Die Sizes Included | Wd. | Container Type | Each | |
Tool Steel | |||||
---|---|---|---|---|---|
Right-Hand Thread | |||||
20 | 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-14 | 1", 1 3/8", 1 3/4" | Plastic Case | 0000000 | 0000000 |
Thread Repairing Die and File Sets for Tight Spots
Renew external threads in a wide range of sizes. The dies in these sets have a narrower width than standard dies, making them a good choice for thread repair in tight spots. They're hex shaped for use with conventional wrenches.
Number of Pieces | Die Sizes Included | File Sizes Included | Container Type | Each | |
Carbon Steel | |||||
---|---|---|---|---|---|
Right-Hand Thread | |||||
15 | 1/4"-20 (7/16" Wd.), 1/4"-28 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 5/16"-24 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 3/8"-24 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 7/16"-20 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 1/2"-20 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 9/16"-18 (7/8" Wd.), 5/8"-11 (15/16" Wd.), 5/8"-18 (15/16" Wd.) | For 11 to 24 threads per inch | Plastic Case | 0000000 | 000000 |
18 | 1/4"-20 (7/16" Wd.), 1/4"-28 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 5/16"-24 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 3/8"-24 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 7/16"-20 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 1/2"-20 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 9/16"-18 (7/8" Wd.), 5/8"-11 (15/16" Wd.), 5/8"-18 (15/16" Wd.), 3/4"-10 (1 1/16" Wd.), 3/4"-16 (1 1/16" Wd.) | For 9 to 32 threads per inch, For 11 to 24 threads per inch | Plastic Case | 0000000 | 00000 |