McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Type
    Industrial Info Compare
    For Hole Type
    Chamfer Type
    Component
    Thread Direction
    Container Type
    Number of Pieces
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Number of Dies
    DFARS Specialty Metals
    Number of Taps
    Pipe Size
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    9 Products

    Tap and Die Sets

    Image of Product. Front orientation. Tap and Die Sets.
    Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic.
    Carbon Steel—Carbon steel taps are for thread repair and occasional tapping.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper-chamfer taps. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Hex—Hex-shaped dies are for thread repair and can be used with conventional wrenches.
    No. of
    Pieces
    Tap Sizes Included
    Tap Chamfer
    Type
    Die
    Shape
    Die Sizes Included
    Wd.
    Container
    Type
    Includes
    Each
    Carbon Steel Taps and Dies
     
    Right-Hand Thread
    25M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mmPlugHexM14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mm1 7/16", 1 13/16"Plastic CaseDie Wrench (2), Tap Wrench000000000000000
    651/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mmPlug, TaperHex1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mm5/8", 1", 1 3/16", 1 7/16", 1 13/16"Plastic CaseDie Wrench (4), Tap Wrench (4), Thread Gauge0000000000000
     

    Thread-Repairing Dies

    Image of Product. Front orientation. Dies. Thread-Repairing Dies.
    Rescue mangled threads and return them to like-new condition. By repairing threads, you don’t have to replace the fastener or resize holes. These dies smooth out flaws and remove rust so threads engage properly and connections stay strong. Turn them with a hex die wrench or a standard adjustable wrench.
    Don’t risk damaging threads further with an inferior-quality die. Our dies are machined in the U.S. to precise dimensions for a perfect thread profile.
    Uncoated Carbon Steel—Hard and wear resistant for a long life, these dies work well on both metal and plastic.
    Uncoated
    Carbon Steel
    Thread Size
    Thread
    Type
    Wd.
    Each
    M22 × 1.5 mmMetric
    		1 5/8"00000000000000
    M22 × 2.5 mmMetric
    		1 5/8"000000000000

    Dies

    Image of Product. Front orientation. Dies. Dies.
    Rotate these dies around studs and rods to create new fastener threads. A cut above lower-quality dies that can leave inferior threads, these are machined in the U.S. to precise dimensions for accuracy and consistency.
    They are adjustable, so you can cut a shallow thread that makes it easier to get the die started on the first pass. Turn the set screw to open the die to its largest diameter. Then rotate the die with a round die wrench and adjust the screw as you make additional passes to reach the proper thread size.
    Uncoated High-Speed Steel—The most versatile dies stay sharp and cut cleanly, even if you use them every day. They last much longer than carbon steel dies and you won’t have to work as hard to create threads.
    Titanium Nitride (TiN)-Coated High-Speed Steel—When you regularly work on challenging metals like stainless steel, choose dies with a TiN coating that reduces friction and resists heat. They turn faster and last longer than uncoated dies.
    Dies
    Die Wrenches
    Uncoated
    High-Speed Steel
    Titanium Nitride
    (TiN)-Coated High-Speed Steel
    Thread Size
    Thread
    Type
    Each
    Each
    Each
    2" OD
    M22 × 1.5 mmMetric
    		00000000000000000000000000000000000000000
    M22 × 2.5 mmMetric
    		00000000000000000000000000000000000000
     
    back to top