A digital display allows for easy reading of measurements.

Gauges have a digital display for easy reading of measurements.

Read pressure directly at the source and send data remotely with one device.

Remotely monitor pressure in general purpose applications such as pumping and compressing systems.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

At least four times as accurate as standard pressure transmitters, these transmitters are ideal for use in laboratories and analytical testing applications.

For use in sanitary applications such as food processing, these transmitters are 3-A certified.

The diaphragm on these transmitters mounts flush with your system’s connection, leaving no room for thick liquids to clog or harden. They’re often used to monitor pressure in wastewater, paint, and adhesive-dispensing applications.

Measure your equipment’s pressure and send the data directly to a development board or single-board computer. Also known as transducers, these transmitters convert pressure into an electrical I²C signal and transmit it to your board.

Monitor and control vacuum pumps, air compressors, and hydraulics while viewing readings and warnings on the display.

With an accuracy of ±0.05%, these have the highest accuracy of all our test gauges.

Read measurements on an LCD. These Mitutoyo indicators have a spring-loaded plunger that retracts and extends to measure objects.

These indicators have a larger display than other Mitutoyo electronic indicators for easier reading.

These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

These indicators can display readings in fractional increments in addition to decimal increments.

Read measurements on an LCD. These Starrett indicators have a spring-loaded plunger that retracts and extends to measure objects.

Deep jaws and extra-long measuring ranges make measuring large material easier.

These calipers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These calipers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Designed with a rounded jaw for measuring the wall thickness of pipe, tubing, and other curved surfaces.

A low measuring force allows these calipers to accurately measure elastic and springy materials, such as plastic and rubber.

These calipers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Install these gauges onto the jaws of electronic, dial, and vernier calipers to measure the center-to-center distance between two holes.

Expand electronic, dial, and vernier calipers to measure larger items.

Attach to Starrett electronic and dial calipers to stabilize them when taking depth measurements.

Adapt 10-pin cables for connection to a USB port on a PC.

Use these cables to connect measuring tools with SPC data output directly to a PC.

Send measurement data via Bluetooth to PCs, smartphones, and tablets.

Connect this receiver to your PC for use with a Mitutoyo wireless transmitter.

Connect measuring tools with SPC data output to miniprocessors and multiplexers.

Connect this receiver to your PC for use with a Starrett wireless transmitter.

Up to ten times as precise as standard electronic micrometers.

Measure sheet metal and other large items and easily read the results on an LCD.

Measure a variety of objects of different lengths and easily read the results on an LCD. These micrometers come with interchangeable anvils of varying sizes.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

The anvil and spindle are pointed for measuring small grooves and keyways.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These sets come with calibration certificates traceable to NIST that state the tools have passed a test for accuracy.

These sets come with calibration certificates traceable to NIST that state the tools have passed a test for accuracy.

These sets turn your micrometer into a specialty micrometer capable of measuring slots, grooves, angles, cylindrical walls, and other surfaces.

Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking.

Take height measurements and set the attached scriber at a specific height for repeat marking.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

All gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off.

Connectable extension rods allow you to measure depths.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Measure the wall thickness of pipe, tubing, and other curved surfaces with these gauges.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

An extra-deep throat provides a long reach for measuring sheet metal and other large items.

Measure the thickness of painted metal without removing the coating.

These Mitutoyo micrometer heads show measurements on an LCD. Mount them in jigs, fixtures, machine tools, movable tables, and other equipment that require precise adjustments.

Check for out-of-parallel anvils and determine wear on micrometers.

Also known as calibration standards, these rods let you check and set micrometers and other measuring tools.

Mount these sensors between a robot arm and a tool for precise control during delicate tasks, such as sanding or assembling small parts.

Thinner than a credit card, these force sensors fit into narrow spaces to measure the applied load between two surfaces.

Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.

A chuck-style grip with a round opening gets a secure hold on pins.

Good for gripping most shapes and materials.

Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers.

Measure the torque output of torque wrenches, screwdrivers, and other hand tools to ensure they deliver the right amount of torque—and check your results on a digital screen.

Calibrate torque-limiting power tools such as air-powered and impact drivers.

Measure temperature, humidity, and radiant heat in your work area to keep your team safe from heat-related hazards.

Continuously measure ambient sound levels. The display alerts you when levels either exceed or fall below your programmed thresholds.

Install this totalizer on your grease gun to accurately measure grease dispensing and reduce waste.

With a display that can be mounted up to 1,000 feet from the body, these totalizers are often installed in hard-to-access areas and remote locations.

Measure the total flow volume of gasoline, diesel fuel, and kerosene.

To protect against dust, washdowns, and corrosion, these flowmeter/totalizers have an enclosure that meets NEMA 4X.

To withstand water and a variety of caustic chemicals, these flowmeter/totalizers have a corrosion-resistant 316 stainless steel body.

Determine the flow rate and total flow volume of water with the same meter.

For secure connections in large pipelines with high flow rates, these flowmeter/totalizers have flanged ends.

With a display that can be placed up to 25 feet from the sensor, these flowmeter/totalizers are often used in hard-to-access areas.