These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

These indicators have a larger display than other Mitutoyo electronic indicators for easier reading.

These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

Check whether measurements are in tolerance at a glance. LCD backlighting changes from green to red to indicate when measurements fall outside your set tolerance.

These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

A magnetic base provides a solid mount on metal surfaces.

Read measurements on an LCD. These Starrett indicators have a spring-loaded plunger that retracts and extends to measure objects.

Connect measuring tools with SPC data output to miniprocessors and multiplexers.

Convert 10-pin cables to RS-232C for connection to PCs.

Analyze data, perform calculations, and print results from measuring tools with SPC data output.

Connect this receiver to your PC for use with a Starrett wireless transmitter.

Connect measuring tools with SPC data output to miniprocessors and multiplexers.

IP65 rated for protection from dust and water jets. This micrometer has an extra-deep throat for measuring sheet metal and other large items.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Measure a variety of objects of different lengths and easily read the results on an LCD. These micrometers come with interchangeable anvils of varying sizes.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These micrometers have a round anvil for measuring the wall thickness of pipe, tubing, and other curved surfaces.

These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

The anvil and spindle are pointed for measuring small grooves and keyways.

Turn your micrometer into a specialty micrometer capable of measuring slots, grooves, angles, cylindrical walls, and other surfaces.

These sets come with calibration certificates traceable to NIST that state the tools have passed a test for accuracy.

Read your measurements easily on an LCD. Sets include a caliper, micrometer, and case.

These calipers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Switch between decimal and fractional measuring increments.

Deep jaws and extra-long measuring ranges make measuring large material easier.

The display, markings, and thumb wheel on these calipers are positioned for comfortable left-handed use.

The pointed jaws on this caliper can fit into smaller spaces than standard calipers jaws.

Measure center-to-center distances with the pointed jaws on these calipers, which are designed to self-center in holes.

Designed with a rounded jaw for measuring the wall thickness of pipe, tubing, and other curved surfaces.

Measure depths up to 8" using connectable extension rods.

All gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off.

Measure depth in dusty or wet environments--these gauges are rated IP67 for protection from dust and temporary water submersion.

Change out the steel extension rods supplied in 1" incremental lengths to measure the depth of holes, slots, shoulders, and projections.

IP54 rated for limited protection from dust and splashing water.

Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking.

Take height measurements and set the attached scriber at a specific height for repeat marking.

Measure the thickness of sheet metal, paper, and other flat stock, and read the values on an LCD.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Small enough to fit between your thumb and index finger, use these gauges for quick thickness checks.

Rated for environments where hazardous material is present, these gauges measure the thickness of steel, stainless steel, and aluminum.

These micrometer heads come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Check your caliper’s inside and outside measurements.

The included certificate of calibration traceable to NIST states that these rods have passed a test for accuracy.

The digits displayed on these counters are visible up to 100 ft. away.

The digits displayed on these counters are visible up to 100 ft. away.

These counters have mounting holes and a base plate for securing to a wall or work surface.

For quick installation, these counters fit into standard DIN panel cutouts.

These counters do not require voltage to register a count.

Wire these counters/ratemeters to an electrical pulse-emitting switch, sensor, or encoder to count input while tracking rates in units such as gallons per minute.

Mount these indicators to your equipment, and their bright LED will catch your attention when it’s time for maintenance or inspection.

Record the running time of machines and vehicles that vibrate while operating.

With a sensor that’s activated by your electric motor’s magnetic field, these meters show the motor’s running time.

Identify intermittent issues such as voltage spikes and temporary power flow problems—this meter records measurements from electrical tests over time. Review data in real time or save it for future analysis.

Perform a variety of electrical tests with a multimeter that fits in your pocket.

Perform electrical tests in washdown environments. These multimeters have an IP67-rated housing.

Run a cable through the open jaw to test current without interrupting the circuit. These multimeters are especially useful for high current measurements and include test leads to perform other electrical tests. Fluke multimeters are known for quality and durability.

Measure the amount of power your devices draw and calculate energy costs with these consumption meters.

A wireless connection transmits electrical measurements from the multimeter to a separate display, so you can take measurements in hard-to-reach or potentially dangerous locations. Fluke multimeters are known for quality and durability.

Grasp tiny components on circuit boards and other electronic systems in order to test, identify, and troubleshoot them.

Jaws surround a cable to test current without interrupting the circuit, making these high-quality, durable Fluke multimeters especially useful for testing high current. They include test leads to perform other electrical tests.

With this combination loop calibrator and multimeter, check for current control loop issues in PLCs, motors, and fans in addition to taking other electrical measurements. When used as a loop calibrator, the current input as well as the percentage of the input scale is shown on the dual display, giving you quick diagnostic information. Fluke is known for quality and durability.

Rely on the quality and durability of a Fluke multimeter when taking voltage, resistance, and other electrical measurements.

This meter manually adjusts to the low ranges needed for testing electronic components such as circuit boards and diodes.

Measure electrical resistance as an indication of insulation quality in equipment such as motors, generators, and switchgear.

Safely check for the presence of voltage in high-voltage equipment and lines. This noncontact detector checks for voltage by sensing electrostatic fields when brought near the electrical component.

Check that your material and work surfaces won’t discharge static electricity, which can damage sensitive electronics.

In addition to vibrating to confirm the presence of voltage, these testers have LEDs that light up to show an approximate voltage level.

Connect to Fluke multimeters with a set of red and black test leads.

These kits include a set of red and black Fluke test leads with a variety of interchangeable tips.