At 2 _1/4" square and 1" wide, this angle indicator easily fits into your pocket. Choose an alternate zero point with the push of a button.

Check the angle of your horizontal surface side-to-side and front-to-back. These indicators have a highly accurate sensor and precision ground stainless steel base. The LCD display shows slope, level, and angle in numerical values along with an image of a manual angle indicator. If you flip them so the LCD display is upright, they’ll automatically switch from checking two angles to check a single angle on a horizontal or vertical surface. They come with cable and a wall plug adapter for charging.

Because it’s stainless steel, the base makes these indicators a durable choice for industrial applications where plastic-bodied indicators would be too fragile. A V-groove provides stability on curved surfaces.

These angle indicators display highly accurate angle, level, and tilt measurements. They come set at true 0°, but you can choose an alternate zero point with the push of a button. Another button will freeze the reading on the display. Indicators have machined leveling surfaces, a V-groove for stability on curved surfaces, and two 6-32 threaded holes for mounting.

These angle indicators come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy. The display shows highly accurate angle, level, and tilt measurements. They come set at true 0°, but you can choose an alternate zero point with the push of a button. Another button will freeze the reading on the display. Indicators have machined leveling surfaces, a V-groove for stability on curved surfaces, and two 6-32 threaded holes for mounting.

At 2 _1/4" square and 1" wide, this angle indicator easily fits into your pocket. It also shows level on the display and has a hold button that freezes the reading. Choose an alternate zero point with the push of a button. The display pops up for easy viewing. A V-groove provides stability on curved surfaces.

The LCD on this digital angle indicator shows angle in degrees and percent of slope. The display inverts when you turn it upside down.

To measure angles from a distance and hear the measurement read aloud, download an app to connect your device to these angle indicators. At 2 _1/4" square and 1" wide, they fit easily in your pocket. Push the zero button to calibrate these indicators to any surface.

Align guide rails or lay pipe at specific angles from a flat surface. The laser light is red and is best viewed indoors. The display shows the precise angle of the beam and rotates for overhead measurements. The audible level indicator tells you when the tool is level and plumb.

Align rotary shafts with the help of a mobile app. These sensor kits are more accurate than straightedges and easier to use than dial indicators. Properly aligning shafts reduces vibration and protects couplings, bearings, and other parts from wear and damage.

Use the included chain clamps to mount these sensors above your coupling, where they detect the degree of misalignment between the shafts. The app shows live animations to give step-by-step instructions for repositioning your equipment. Once the shafts are aligned, the app saves a report documenting the process.

Good for extended use in industrial environments, these sensors last up to 18 hours between charges and are IP54 rated for protection from dust.

A dot laser extends the working distance 200 feet beyond the tool length. This tool has two digital displays that invert when turned upside down; one shows the base angle and the other shows the moveable arm angle. It also has a lock to hold the arm in position, a hold button that freezes the display, auto shutoff, and 1/4"-20 threads for connecting to a tripod.

These tools have front and back digital displays, as well as horizontal and vertical vials. Internal memory stores angle measurements, and a calculator determines the exact angles of cuts. Displays will shut off automatically when not in use.

Identify worn tire treads before they cause an accident. These gauges measure the depth of your tire tread with such precision you'll be able to note changes in tread depth as thin as a single sheet of foil.

Measure depths up to 8” by combining multiple extension rods. These gauges are three times more accurate than our standard electronic depth gauges with extension rods. They have an LCD screen that makes measurements easy to read. Often used during manufacturing, they help make sure drilled holes and machined slots meet design specifications and fit in assemblies. Simply press them against the bottom of a hole or slot and push a button to measure—no fine adjustments needed. Or start measuring at any point by pushing the zero-set button. These gauges have built-in memory to store measurements and an SPC data output. Connect them to a computer or data processor to analyze data and monitor measurements in real time.

To save battery power, these gauges automatically turn off after 20 minutes of inactivity. With zero-position memory, also known as absolute (ABS) positioning, they retain their measuring position when they’re turned off.

An LCD display helps you read depth measurements of drilled holes and machined slots. These gauges are often used for quality control in manufacturing plants and laboratories. Store data internally or use the SPC data output to connect to a computer or data processor. This allows you to analyze data and monitor measurements in real time. The zero-set button lets you start measuring at any point. With zero-position memory, also known as absolute (ABS) positioning, these gauges retain their measuring position when the scale is off. To save battery life, they turn off after 30 minutes of inactivity.

Connect multiple extension rods to measure depths up to 22". Often used during manufacturing, these gauges measure drilled holes and machined slots to ensure parts meet design specifications and fit in assemblies. Measurements are easy to read and displayed on an LCD screen. These gauges have a zero-set button, so you can start measuring at any point.

Measure the depth of anything from drilled holes to machined grooves—these gauges display readings and send data to Bluetooth-enabled devices without any additional effort. View findings on your computer or data processor to track trends over time. These gauges have internal data storage and an SPC data output. Zero-position memory, also known as absolute (ABS) positioning, retains the gauge’s measuring position even when turned off.

IP67 rated for protection from dust and temporary water submersion. These gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. All are IP67 rated for protection from dust and temporary water submersion. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.

Precisely measure shallow holes, slots, and recesses without any fine adjustments. Simply press these gauges against the bottom surface and push a button to measure. The LCD display makes measurements easy to read. Shaped to fit your palm, these gauges are also comfortable to hold and position. Store measurements on the gauge or wirelessly send them to a computer or data processor up to 30 ft. away using the built-in transmitter. With SPC data output, you can remotely analyze data and monitor measurements in real time.

A zero-set button lets you start measuring at any point. With zero-position memory, also known as absolute (ABS) positioning, these gauges retain their measuring position when the scale is off. To save battery life, they turn off after 20 minutes of inactivity.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.