Clear All
Specifications Met Specifications Met | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
|
System of Measurement System of Measurement |
|---|
|
For ID For ID |
|---|
Retaining Ring Type Retaining Ring Type |
|---|
 | Internal |
Ring OD Ring OD |
|---|
|
Material Material |
|---|
|
Finish Finish |
|---|
|
Ring Thickness Ring Thickness |
|---|
For Groove Diameter For Groove Diameter |
|---|
|
Minimum Hardness Minimum Hardness |
|---|
|
Thrust Load Capacity Thrust Load Capacity |
|---|
|
Magnetic Properties Magnetic Properties |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Passivation Passivation |
|---|
|
Container Type Container Type |
|---|
|
For Bore Type For Bore Type |
|---|
|
Container Length Container Length |
|---|
|
For Shaft End Type For Shaft End Type |
|---|
|
Container Depth Container Depth |
|---|
|
Container Width Container Width |
|---|
|
Container Features Container Features |
|---|
|
Internal Retaining Rings
Squeeze these rings to place them in the groove inside a bore or housing. Ring OD is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings.
1060-1090 spring steel and spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chromate plated finishes have some corrosion resistance, and zinc chromate plated finishes have good corrosion resistance.
DIN 1.4122 stainless steel rings withstand wear caused by abrasion, similar to 400 series stainless steel. Rings are passivated for added protection against corrosion.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
Metric
For Groove | Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For ID, mm | Dia., mm | Wd., mm | OD, mm | Thick., mm | Min. Hardness | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
Black-Phosphate 1060-1090 Spring Steel | |||||||||||
| 8 | 8.4 | 0.9 | 8.7 | 0.8 | Rockwell C44 | 450 | Magnetic | DIN 472 | 50 | 000000000 | 00000 |
| 9 | 9.4 | 0.9 | 9.8 | 0.8 | Rockwell C44 | 450 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 10 | 10.4 | 1.1 | 10.8 | 1 | Rockwell C44 | 890 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 11 | 11.4 | 1.1 | 11.8 | 1 | Rockwell C44 | 890 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 12 | 12.5 | 1.1 | 13 | 1 | Rockwell C44 | 890 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 13 | 13.6 | 1.1 | 14.1 | 1 | Rockwell C47 | 940 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 14 | 14.6 | 1.1 | 15.1 | 1 | Rockwell C44 | 1,010 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 15 | 15.7 | 1.1 | 16.2 | 1 | Rockwell C47 | 1,120 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 16 | 16.8 | 1.1 | 17.3 | 1 | Rockwell C44 | 1,230 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 17 | 17.8 | 1.1 | 18.3 | 1 | Rockwell C47 | 1,340 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 18 | 19 | 1.1 | 19.5 | 1 | Rockwell C44 | 1,460 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 19 | 20 | 1.1 | 20.5 | 1 | Rockwell C47 | 1,520 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 20 | 21 | 1.1 | 21.5 | 1 | Rockwell C44 | 1,610 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 21 | 22 | 1.1 | 22.5 | 1 | Rockwell C47 | 1,700 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 22 | 23 | 1.1 | 23.5 | 1 | Rockwell C44 | 1,790 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 23 | 24.1 | 1.3 | 24.6 | 1.2 | Rockwell C47 | 1,790 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 24 | 25.2 | 1.3 | 25.9 | 1.2 | Rockwell C44 | 3,120 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 25 | 26.2 | 1.3 | 26.9 | 1.2 | Rockwell C47 | 3,280 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 26 | 27.2 | 1.3 | 27.9 | 1.2 | Rockwell C47 | 3,100 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 27 | 28.4 | 1.3 | 29.1 | 1.2 | Rockwell C47 | 2,990 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 28 | 29.4 | 1.3 | 30.1 | 1.2 | Rockwell C44 | 2,990 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 29 | 30.4 | 1.3 | 31.1 | 1.2 | Rockwell C47 | 3,050 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 30 | 31.4 | 1.3 | 32.1 | 1.2 | Rockwell C44 | 3,080 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 31 | 32.7 | 1.3 | 33.4 | 1.2 | Rockwell C47 | 3,100 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 32 | 33.7 | 1.3 | 34.4 | 1.2 | Rockwell C44 | 3,100 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 33 | 34.7 | 1.3 | 35.5 | 1.2 | Rockwell C47 | 3,210 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 34 | 35.7 | 1.6 | 36.5 | 1.5 | Rockwell C44 | 5,890 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 35 | 37 | 1.6 | 37.8 | 1.5 | Rockwell C47 | 6,040 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 36 | 38 | 1.6 | 38.8 | 1.5 | Rockwell C44 | 5,930 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 37 | 39 | 1.6 | 39.8 | 1.5 | Rockwell C47 | 6,090 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 38 | 40 | 1.6 | 40.8 | 1.5 | Rockwell C44 | 6,340 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 39 | 41 | 1.6 | 42 | 1.5 | Rockwell C47 | 6,470 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 40 | 42.5 | 1.85 | 43.5 | 1.75 | Rockwell C44 | 10,000 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 41 | 43.5 | 1.85 | 44.5 | 1.75 | Rockwell C47 | 10,110 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 42 | 44.5 | 1.85 | 45.5 | 1.75 | Rockwell C47 | 10,000 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 43 | 45.5 | 1.85 | 46.5 | 1.75 | Rockwell C47 | 10,000 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 44 | 46.5 | 1.85 | 47.5 | 1.75 | Rockwell C47 | 9,730 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 45 | 47.5 | 1.85 | 48.5 | 1.75 | Rockwell C44 | 9,680 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 46 | 48.5 | 1.85 | 49.5 | 1.75 | Rockwell C47 | 9,640 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 47 | 49.5 | 1.85 | 50.5 | 1.75 | Rockwell C47 | 9,770 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 48 | 50.5 | 1.85 | 51.5 | 1.75 | Rockwell C47 | 9,710 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 50 | 53 | 2.15 | 54.2 | 2 | Rockwell C44 | 13,600 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 52 | 55 | 2.15 | 56.2 | 2 | Rockwell C44 | 13,500 | Magnetic | DIN 472 | 1 | 000000000 | 000 |
| 53 | 56 | 2.15 | 57.2 | 2 | Rockwell C44 | 13,640 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 54 | 57 | 2.15 | 58.2 | 2 | Rockwell C44 | 13,500 | Magnetic | DIN 472 | 1 | 000000000 | 000 |
| 55 | 58 | 2.15 | 59.2 | 2 | Rockwell C44 | 13,500 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 56 | 59 | 2.15 | 60.2 | 2 | Rockwell C44 | 13,500 | Magnetic | DIN 472 | 1 | 000000000 | 000 |
| 57 | 60 | 2.15 | 61.2 | 2 | Rockwell C44 | 13,660 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 58 | 61 | 2.15 | 62.2 | 2 | Rockwell C44 | 13,600 | Magnetic | DIN 472 | 1 | 000000000 | 000 |
| 60 | 63 | 2.15 | 64.2 | 2 | Rockwell C44 | 13,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 62 | 65 | 2.15 | 66.2 | 2 | Rockwell C44 | 13,600 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 63 | 66 | 2.15 | 67.2 | 2 | Rockwell C44 | 13,660 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 64 | 67 | 2.15 | 68.2 | 2 | Rockwell C44 | 13,600 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 65 | 68 | 2.65 | 69.2 | 2.5 | Rockwell C44 | 27,200 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 67 | 70 | 2.65 | 71.5 | 2.5 | Rockwell C44 | 27,200 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 68 | 71 | 2.65 | 72.5 | 2.5 | Rockwell C44 | 26,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 70 | 73 | 2.65 | 74.5 | 2.5 | Rockwell C44 | 26,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 72 | 75 | 2.65 | 76.5 | 2.5 | Rockwell C44 | 26,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 75 | 78 | 2.65 | 79.5 | 2.5 | Rockwell C44 | 26,500 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 76 | 79 | 2.65 | 80.5 | 2.5 | Rockwell C44 | 26,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 78 | 81 | 2.65 | 82.5 | 2.5 | Rockwell C44 | 27,400 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 80 | 83.5 | 2.65 | 85.5 | 2.5 | Rockwell C44 | 26,900 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 82 | 85.5 | 2.65 | 87.5 | 2.5 | Rockwell C44 | 26,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 85 | 88.5 | 3.15 | 90.5 | 3 | Rockwell C44 | 45,100 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 88 | 91.5 | 3.15 | 93.5 | 3 | Rockwell C44 | 46,900 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 90 | 93.5 | 3.15 | 95.5 | 3 | Rockwell C44 | 44,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 92 | 95.5 | 3.15 | 97.5 | 3 | Rockwell C44 | 45,100 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 95 | 98.5 | 3.15 | 100.5 | 3 | Rockwell C44 | 43,800 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 98 | 101.5 | 3.15 | 103.5 | 3 | Rockwell C44 | 42,900 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 100 | 103.5 | 3.15 | 105.5 | 3 | Rockwell C44 | 42,200 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 105 | 109 | 4.15 | 112 | 4 | Rockwell C44 | 98,010 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 110 | 114 | 4.15 | 117 | 4 | Rockwell C44 | 93,200 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 115 | 119 | 4.15 | 122 | 4 | Rockwell C44 | 91,940 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 120 | 124 | 4.15 | 127 | 4 | Rockwell C44 | 89,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 125 | 129 | 4.15 | 132 | 4 | Rockwell C44 | 86,550 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 130 | 134 | 4.15 | 137 | 4 | Rockwell C44 | 84,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 135 | 139 | 4.15 | 142 | 4 | Rockwell C44 | 80,480 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 140 | 144 | 4.15 | 147 | 4 | Rockwell C44 | 78,600 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 145 | 149 | 4.15 | 152 | 4 | Rockwell C44 | 75,530 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 150 | 155 | 4.15 | 158 | 4 | Rockwell C44 | 73,200 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 155 | 160 | 4.15 | 164 | 4 | Rockwell C44 | 72,830 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 160 | 165 | 4.15 | 169 | 4 | Rockwell C44 | 72,100 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 165 | 170 | 4.15 | 174.5 | 4 | Rockwell C44 | 71,710 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 170 | 175 | 4.15 | 179.5 | 4 | Rockwell C44 | 78,400 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 175 | 180 | 4.15 | 184.5 | 4 | Rockwell C44 | 78,900 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 180 | 185 | 4.15 | 189.5 | 4 | Rockwell C44 | 78,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 185 | 190 | 4.15 | 194.5 | 4 | Rockwell C44 | 78,450 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 190 | 195 | 4.15 | 199.5 | 4 | Rockwell C44 | 76,400 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 200 | 205 | 4.15 | 209.5 | 4 | Rockwell C44 | 73,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 210 | 216 | 5.15 | 222 | 5 | Rockwell C40 | 135,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 220 | 226 | 5.15 | 232 | 5 | Rockwell C40 | 129,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 230 | 236 | 5.15 | 242 | 5 | Rockwell C40 | 123,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 240 | 246 | 5.15 | 252 | 5 | Rockwell C40 | 118,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 250 | 256 | 5.15 | 262 | 5 | Rockwell C40 | 113,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 260 | 268 | 5.15 | 275 | 5 | Rockwell C40 | 120,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 270 | 278 | 5.15 | 285 | 5 | Rockwell C40 | 116,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 280 | 288 | 5.15 | 295 | 5 | Rockwell C40 | 112,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 290 | 298 | 5.15 | 305 | 5 | Rockwell C40 | 108,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 300 | 308 | 5.15 | 315 | 5 | Rockwell C40 | 104,000 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
Black-Phosphate Spring Steel | |||||||||||
| 13 | 13.6 | 1.1 | 14.1 | 1 | Rockwell C44 | 940 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 15 | 15.7 | 1.1 | 16.2 | 1 | Rockwell C44 | 1,120 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 17 | 17.8 | 1.1 | 18.3 | 1 | Rockwell C44 | 1,340 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 19 | 20 | 1.1 | 20.5 | 1 | Rockwell C44 | 1,520 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 21 | 22 | 1.1 | 22.5 | 1 | Rockwell C44 | 1,700 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 23 | 24.1 | 1.3 | 24.6 | 1.2 | Rockwell C44 | 1,790 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 25 | 26.2 | 1.3 | 26.9 | 1.2 | Rockwell C44 | 3,280 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 26 | 27.2 | 1.3 | 27.9 | 1.2 | Rockwell C44 | 3,100 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
Zinc-Chromate-Plated 1060-1090 Spring Steel | |||||||||||
| 8 | 8.4 | 0.9 | 8.7 | 0.8 | Rockwell C47 | 450 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 9 | 9.4 | 0.9 | 9.8 | 0.8 | Rockwell C47 | 450 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 10 | 10.4 | 1.1 | 10.8 | 1 | Rockwell C47 | 890 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 11 | 11.4 | 1.1 | 11.8 | 1 | Rockwell C47 | 890 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 12 | 12.5 | 1.1 | 13 | 1 | Rockwell C47 | 890 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 14 | 14.6 | 1.1 | 15.1 | 1 | Rockwell C47 | 1,010 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 15 | 15.7 | 1.1 | 16.2 | 1 | Rockwell C47 | 1,120 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 16 | 16.8 | 1.1 | 17.3 | 1 | Rockwell C47 | 1,230 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 17 | 17.8 | 1.1 | 18.3 | 1 | Rockwell C47 | 1,340 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 18 | 19 | 1.1 | 19.5 | 1 | Rockwell C47 | 1,460 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 19 | 20 | 1.1 | 20.5 | 1 | Rockwell C47 | 1,520 | Magnetic | DIN 472 | 50 | 000000000 | 0000 |
| 20 | 21 | 1.1 | 21.5 | 1 | Rockwell C47 | 1,610 | Magnetic | DIN 472 | 50 | 000000000 | 00000 |
| 21 | 22 | 1.1 | 22.5 | 1 | Rockwell C47 | 1,700 | Magnetic | DIN 472 | 50 | 000000000 | 00000 |
| 22 | 23 | 1.1 | 23.5 | 1 | Rockwell C47 | 1,790 | Magnetic | DIN 472 | 50 | 000000000 | 00000 |
| 23 | 24.1 | 1.3 | 24.6 | 1.2 | Rockwell C47 | 1,790 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 24 | 25.2 | 1.3 | 25.9 | 1.2 | Rockwell C47 | 3,120 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 25 | 26.2 | 1.3 | 26.9 | 1.2 | Rockwell C47 | 3,280 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 26 | 27.2 | 1.3 | 27.9 | 1.2 | Rockwell C47 | 3,100 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 28 | 29.4 | 1.3 | 30.1 | 1.2 | Rockwell C47 | 2,990 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 30 | 31.4 | 1.3 | 32.1 | 1.2 | Rockwell C47 | 3,080 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 32 | 33.7 | 1.3 | 34.4 | 1.2 | Rockwell C47 | 3,100 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 34 | 35.7 | 1.6 | 36.5 | 1.5 | Rockwell C47 | 5,890 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 36 | 38 | 1.6 | 38.8 | 1.5 | Rockwell C47 | 5,930 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 38 | 40 | 1.6 | 40.8 | 1.5 | Rockwell C47 | 6,340 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 40 | 42.5 | 1.85 | 43.5 | 1.75 | Rockwell C47 | 10,000 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 45 | 47.5 | 1.85 | 48.5 | 1.75 | Rockwell C47 | 9,680 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 50 | 53 | 2.15 | 54.2 | 2 | Rockwell C44 | 13,600 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 55 | 58 | 2.15 | 59.2 | 2 | Rockwell C44 | 13,500 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 60 | 63 | 2.15 | 64.2 | 2 | Rockwell C44 | 13,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 65 | 68 | 2.65 | 69.2 | 2.5 | Rockwell C44 | 27,200 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 70 | 73 | 2.65 | 74.5 | 2.5 | Rockwell C44 | 26,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 75 | 78 | 2.65 | 79.5 | 2.5 | Rockwell C44 | 26,500 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 80 | 83.5 | 2.65 | 85.5 | 2.5 | Rockwell C44 | 26,900 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 85 | 88.5 | 3.15 | 90.5 | 3 | Rockwell C44 | 45,100 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 90 | 93.5 | 3.15 | 95.5 | 3 | Rockwell C44 | 44,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
DIN 1.4122 Stainless Steel | |||||||||||
| 8 | 8.4 | 0.9 | 8.7 | 0.8 | Rockwell C47 | 450 | Magnetic | DIN 472 | 10 | 000000000 | 00000 |
| 9 | 9.4 | 0.9 | 9.8 | 0.8 | Rockwell C47 | 450 | Magnetic | DIN 472 | 10 | 000000000 | 00000 |
| 10 | 10.4 | 1.1 | 10.8 | 1 | Rockwell C47 | 890 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 11 | 11.4 | 1.1 | 11.8 | 1 | Rockwell C47 | 890 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 12 | 12.5 | 1.1 | 13 | 1 | Rockwell C47 | 890 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 13 | 13.6 | 1.1 | 14.1 | 1 | Rockwell C47 | 940 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 14 | 14.6 | 1.1 | 15.1 | 1 | Rockwell C47 | 1,010 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 15 | 15.7 | 1.1 | 16.2 | 1 | Rockwell C47 | 1,120 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 16 | 16.8 | 1.1 | 17.3 | 1 | Rockwell C47 | 1,230 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 17 | 17.8 | 1.1 | 18.3 | 1 | Rockwell C47 | 1,340 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 18 | 19 | 1.1 | 19.5 | 1 | Rockwell C47 | 1,460 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 19 | 20 | 1.1 | 20.5 | 1 | Rockwell C47 | 1,520 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 20 | 21 | 1.1 | 21.5 | 1 | Rockwell C47 | 1,610 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 21 | 22 | 1.1 | 22.5 | 1 | Rockwell C47 | 1,700 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 22 | 23 | 1.1 | 23.5 | 1 | Rockwell C47 | 1,790 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 23 | 24.1 | 1.3 | 24.6 | 1.2 | Rockwell C47 | 1,790 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 24 | 25.2 | 1.3 | 25.9 | 1.2 | Rockwell C47 | 3,120 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 25 | 26.2 | 1.3 | 26.9 | 1.2 | Rockwell C47 | 3,280 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 26 | 27.2 | 1.3 | 27.9 | 1.2 | Rockwell C47 | 3,100 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 28 | 29.4 | 1.3 | 30.1 | 1.2 | Rockwell C47 | 2,990 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 30 | 31.4 | 1.3 | 32.1 | 1.2 | Rockwell C47 | 3,080 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 32 | 33.7 | 1.3 | 34.4 | 1.2 | Rockwell C47 | 3,100 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 34 | 35.7 | 1.6 | 36.5 | 1.5 | Rockwell C47 | 5,890 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 36 | 38 | 1.6 | 38.8 | 1.5 | Rockwell C47 | 5,930 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 38 | 40 | 1.6 | 40.8 | 1.5 | Rockwell C47 | 6,340 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 40 | 42.5 | 1.85 | 43.5 | 1.75 | Rockwell C47 | 10,000 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 45 | 47.5 | 1.85 | 48.5 | 1.75 | Rockwell C47 | 9,680 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 50 | 53 | 2.15 | 54.2 | 2 | Rockwell C47 | 13,600 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 55 | 58 | 2.15 | 59.2 | 2 | Rockwell C47 | 13,500 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 60 | 63 | 2.15 | 64.2 | 2 | Rockwell C47 | 13,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 65 | 68 | 2.65 | 69.2 | 2.5 | Rockwell C47 | 27,200 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 70 | 73 | 2.65 | 74.5 | 2.5 | Rockwell C47 | 26,700 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 75 | 78 | 2.65 | 79.5 | 2.5 | Rockwell C47 | 26,500 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 80 | 83.5 | 2.65 | 85.5 | 2.5 | Rockwell C47 | 26,900 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 85 | 88.5 | 3.15 | 90.5 | 3 | Rockwell C47 | 45,100 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 90 | 93.5 | 3.15 | 95.5 | 3 | Rockwell C47 | 44,700 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 95 | 98.5 | 3.15 | 100.5 | 3 | Rockwell C47 | 43,800 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 100 | 103.5 | 3.15 | 105.5 | 3 | Rockwell C47 | 42,200 | Magnetic | DIN 472 | 1 | 000000000 | 00000 |
Heavy-Duty Internal Retaining Rings
Thicker and stronger than standard internal retaining rings, these withstand greater thrust loads. They are made from spring steel, so squeeze them with retaining ring pliers to install and remove them. Their black-phosphate finish won’t corrode in dry environments. All meet DIN 472, an international standard for retaining ring specifications.
Ring OD is measured with the ring uninstalled. Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
For Groove | Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For ID, mm | Dia., mm | Wd., mm | OD, mm | Thick., mm | Min. Hardness | Thrust Load Cap., lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
Metric | |||||||||||
Black Phosphate 1060-1090 Spring Steel | |||||||||||
| 20 | 21 | 1.6 | 21.5 | 1.5 | Rockwell C47 | 3,640 | Magnetic | DIN 472 | 25 | 000000000 | 00000 |
| 22 | 23 | 1.6 | 23.5 | 1.5 | Rockwell C47 | 4,040 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 28 | 29.4 | 1.6 | 30.1 | 1.5 | Rockwell C47 | 4,670 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 30 | 31.4 | 1.6 | 32.1 | 1.5 | Rockwell C47 | 4,810 | Magnetic | DIN 472 | 25 | 000000000 | 00000 |
| 32 | 33.7 | 1.6 | 34.4 | 1.5 | Rockwell C47 | 4,810 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 35 | 37 | 1.85 | 37.8 | 1.75 | Rockwell C47 | 8,220 | Magnetic | DIN 472 | 25 | 000000000 | 0000 |
| 38 | 40 | 1.85 | 40.8 | 1.75 | Rockwell C47 | 8,610 | Magnetic | DIN 472 | 10 | 000000000 | 00000 |
| 40 | 42.5 | 2.15 | 43.5 | 2 | Rockwell C47 | 13,100 | Magnetic | DIN 472 | 10 | 000000000 | 00000 |
| 45 | 47.5 | 2.15 | 48.5 | 2 | Rockwell C47 | 12,700 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 52 | 55 | 2.65 | 56.2 | 2.5 | Rockwell C47 | 21,200 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 55 | 58 | 2.65 | 59.2 | 2.5 | Rockwell C47 | 21,200 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 60 | 63 | 3.15 | 64.2 | 3 | Rockwell C47 | 30,700 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 62 | 65 | 3.15 | 66.2 | 3 | Rockwell C47 | 30,700 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 63 | 66 | 3.15 | 67.2 | 3 | Rockwell C47 | 30,700 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 64 | 67 | 3.15 | 68.2 | 3 | Rockwell C47 | 30,700 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 65 | 68 | 3.15 | 69.2 | 3 | Rockwell C47 | 39,100 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 70 | 73 | 3.15 | 74.5 | 3 | Rockwell C47 | 38,400 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
Single-Turn Spiral Internal Retaining Rings
Slide these rings into place by hand with a single twist for applications with high thrust loads. Ring OD is measured with the ring uninstalled.
1060-1090 spring steel rings are an economical choice with good strength.
18-8 stainless steel rings have good corrosion resistance.
DIN 472 rings meet international standards for groove specifications in retaining rings.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
Metric
For Groove | Ring | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For ID, mm | Dia., mm | Wd., mm | OD, mm | Thick., mm | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
1060-1090 Spring Steel | ||||||||||
| 14 | 14.6 | 1.1 | 14.74 | 0.94 | 2,560 | Magnetic | DIN 472 | 10 | 000000000 | 00000 |
| 15 | 15.7 | 1.1 | 15.85 | 0.94 | 2,740 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 16 | 16.8 | 1.1 | 16.9 | 0.94 | 2,920 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 17 | 17.8 | 1.1 | 17.97 | 0.94 | 3,110 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 18 | 19 | 1.1 | 19.18 | 0.94 | 3,290 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 19 | 20 | 1.1 | 20.25 | 0.94 | 3,470 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 20 | 21 | 1.1 | 21.2 | 0.94 | 3,650 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 22 | 23 | 1.1 | 23.22 | 0.94 | 4,020 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 24 | 25.2 | 1.3 | 25.4 | 1.15 | 5,370 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 25 | 26.2 | 1.3 | 26.45 | 1.15 | 5,600 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 26 | 27.2 | 1.3 | 27.46 | 1.15 | 5,820 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 28 | 29.4 | 1.3 | 29.68 | 1.15 | 6,270 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 30 | 31.4 | 1.3 | 31.79 | 1.15 | 6,720 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 32 | 33.7 | 1.3 | 33.93 | 1.15 | 7,170 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 34 | 35.7 | 1.6 | 36.04 | 1.44 | 9,060 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 35 | 37 | 1.6 | 37.35 | 1.44 | 9,320 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 36 | 38 | 1.6 | 38.36 | 1.44 | 9,590 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 38 | 40 | 1.6 | 40.44 | 1.44 | 10,100 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 40 | 42.5 | 1.85 | 42.86 | 1.69 | 12,500 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 45 | 47.5 | 1.85 | 47.88 | 1.69 | 14,000 | Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 50 | 53 | 2.15 | 53.5 | 1.93 | 16,900 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 55 | 58 | 2.15 | 58.55 | 1.93 | 18,600 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 60 | 63 | 2.15 | 63.6 | 1.93 | 20,300 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 65 | 68 | 2.65 | 68.7 | 2.41 | 26,100 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 70 | 73 | 2.65 | 73.64 | 2.41 | 28,200 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 75 | 78 | 2.65 | 78.75 | 2.41 | 30,200 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
18-8 Stainless Steel | ||||||||||
| 13 | 13.6 | 1.1 | 13.73 | 0.94 | 2,380 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 14 | 14.6 | 1.1 | 14.74 | 0.94 | 2,560 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 15 | 15.7 | 1.1 | 15.85 | 0.94 | 2,740 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 16 | 16.8 | 1.1 | 16.9 | 0.94 | 2,920 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 17 | 17.8 | 1.1 | 17.97 | 0.94 | 3,110 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 18 | 19 | 1.1 | 19.18 | 0.94 | 3,290 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 19 | 20 | 1.1 | 20.25 | 0.94 | 3,470 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 20 | 21 | 1.1 | 21.2 | 0.94 | 3,650 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 22 | 23 | 1.1 | 23.22 | 0.94 | 4,020 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 24 | 25.2 | 1.3 | 25.4 | 1.15 | 5,370 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 25 | 26.2 | 1.3 | 26.45 | 1.15 | 5,600 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 26 | 27.2 | 1.3 | 27.46 | 1.15 | 5,820 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 28 | 29.4 | 1.3 | 29.68 | 1.15 | 6,270 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 30 | 31.4 | 1.3 | 31.79 | 1.15 | 6,720 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 32 | 33.7 | 1.3 | 33.93 | 1.15 | 7,170 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 34 | 35.7 | 1.6 | 36.04 | 1.44 | 9,060 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 35 | 37 | 1.6 | 37.35 | 1.44 | 9,320 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 36 | 38 | 1.6 | 38.36 | 1.44 | 9,590 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 38 | 40 | 1.6 | 40.44 | 1.44 | 10,100 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 40 | 42.5 | 1.85 | 42.86 | 1.69 | 12,500 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 45 | 47.5 | 1.85 | 47.88 | 1.69 | 14,000 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 50 | 53 | 2.15 | 53.5 | 1.93 | 16,900 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 55 | 58 | 2.15 | 58.55 | 1.93 | 18,600 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 60 | 63 | 2.15 | 63.6 | 1.93 | 20,300 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 65 | 68 | 2.65 | 68.7 | 2.41 | 26,100 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 70 | 73 | 2.65 | 73.64 | 2.41 | 28,200 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 75 | 78 | 2.65 | 78.75 | 2.41 | 30,200 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 80 | 83.5 | 2.65 | 84.3 | 2.41 | 32,200 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 85 | 88.5 | 3.15 | 89.35 | 2.91 | 39,300 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 90 | 93.5 | 3.15 | 94.7 | 2.91 | 41,600 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 95 | 98.5 | 3.15 | 99.62 | 2.91 | 43,900 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 100 | 103.5 | 3.15 | 104.5 | 2.91 | 46,300 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
Heavy Duty Spiral Internal Retaining Rings
Thicker than standard spiral rings, these rings withstand greater forces. Wind them into place with two turns and they make 360° contact with the bore, so they’re best for high thrust loads. No tools required. Ring OD is measured with the ring uninstalled.
1060-1090 spring steel rings are an economical choice with good strength.
18-8 stainless steel rings have good corrosion resistance.
DIN 472 rings meet an international standard for retaining ring groove specifications.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
Metric
For Groove | Ring | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For ID, mm | Dia., mm | Wd., mm | OD, mm | Thick., mm | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
1060-1090 Spring Steel | ||||||||||
| 13 | 13.6 | 1.1 | 13.72 | 0.99 | 3,020 | Magnetic | DIN 472 | 10 | 000000000 | 00000 |
| 14 | 14.6 | 1.1 | 14.75 | 0.99 | 3,260 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 15 | 15.7 | 1.1 | 15.85 | 0.99 | 3,490 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 16 | 16.8 | 1.1 | 16.97 | 0.99 | 3,720 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 17 | 17.8 | 1.1 | 17.98 | 0.99 | 3,960 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 18 | 19 | 1.1 | 19.18 | 0.99 | 4,190 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 19 | 20 | 1.1 | 20.19 | 0.99 | 4,420 | Magnetic | DIN 472 | 10 | 000000000 | 0000 |
| 20 | 21 | 1.1 | 21.21 | 0.99 | 4,660 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 22 | 23 | 1.1 | 23.23 | 0.99 | 5,120 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 24 | 25.2 | 1.3 | 25.45 | 1.14 | 5,590 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 25 | 26.2 | 1.3 | 26.45 | 1.14 | 5,820 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 26 | 27.2 | 1.3 | 27.48 | 1.14 | 6,060 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 28 | 29.4 | 1.3 | 29.69 | 1.14 | 6,520 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 30 | 31.4 | 1.3 | 31.71 | 1.14 | 6,990 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 32 | 33.7 | 1.3 | 34.04 | 1.14 | 7,460 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 34 | 35.7 | 1.6 | 36.07 | 1.44 | 10,000 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 35 | 37 | 1.6 | 37.38 | 1.44 | 10,300 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 36 | 38 | 1.6 | 38.39 | 1.44 | 10,600 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 38 | 40 | 1.6 | 40.41 | 1.44 | 11,100 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 40 | 42.5 | 1.85 | 42.93 | 1.69 | 13,800 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 45 | 47.5 | 1.85 | 47.98 | 1.69 | 15,500 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 50 | 53 | 2.15 | 53.54 | 1.93 | 19,700 | Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 55 | 58 | 2.15 | 58.57 | 1.93 | 21,700 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 60 | 63 | 2.15 | 63.63 | 1.93 | 23,600 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 65 | 68 | 2.65 | 68.67 | 2.41 | 30,500 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 70 | 73 | 2.65 | 73.67 | 2.41 | 32,800 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 75 | 78 | 2.65 | 78.68 | 2.41 | 35,200 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 80 | 83.5 | 2.65 | 84.19 | 2.41 | 37,500 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 85 | 88.5 | 3.15 | 89.2 | 2.91 | 48,100 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 90 | 93.5 | 3.15 | 94.21 | 2.91 | 51,000 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 95 | 98.5 | 3.15 | 99.24 | 2.91 | 53,800 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 100 | 103.5 | 3.15 | 104.29 | 2.91 | 56,600 | Magnetic | DIN 472 | 1 | 000000000 | 0000 |
18-8 Stainless Steel | ||||||||||
| 13 | 13.6 | 1.1 | 13.72 | 0.99 | 3,020 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 0000 |
| 14 | 14.6 | 1.1 | 14.75 | 0.99 | 3,260 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 15 | 15.7 | 1.1 | 15.85 | 0.99 | 3,490 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 16 | 16.8 | 1.1 | 16.97 | 0.99 | 3,720 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 17 | 17.8 | 1.1 | 17.98 | 0.99 | 3,960 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 18 | 19 | 1.1 | 19.18 | 0.99 | 4,190 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 19 | 20 | 1.1 | 20.19 | 0.99 | 4,420 | May Be Mildly Magnetic | DIN 472 | 5 | 000000000 | 00000 |
| 20 | 21 | 1.1 | 21.21 | 0.99 | 4,660 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 22 | 23 | 1.1 | 23.23 | 0.99 | 5,120 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 24 | 25.2 | 1.3 | 25.45 | 1.14 | 5,590 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 25 | 26.2 | 1.3 | 26.45 | 1.14 | 5,820 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 26 | 27.2 | 1.3 | 27.48 | 1.14 | 6,060 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 28 | 29.4 | 1.3 | 29.69 | 1.14 | 6,520 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 30 | 31.4 | 1.3 | 31.71 | 1.14 | 6,990 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 32 | 33.7 | 1.3 | 34.04 | 1.14 | 7,460 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 34 | 35.7 | 1.6 | 36.07 | 1.44 | 10,000 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 35 | 37 | 1.6 | 37.38 | 1.44 | 10,300 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 36 | 38 | 1.6 | 38.39 | 1.44 | 10,600 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 38 | 40 | 1.6 | 40.41 | 1.44 | 11,100 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 40 | 42.5 | 1.85 | 42.93 | 1.69 | 13,800 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 45 | 47.5 | 1.85 | 47.98 | 1.69 | 15,500 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 50 | 53 | 2.15 | 53.54 | 1.93 | 19,700 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 0000 |
| 55 | 58 | 2.15 | 58.57 | 1.93 | 21,700 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 60 | 63 | 2.15 | 63.63 | 1.93 | 23,600 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 65 | 68 | 2.65 | 68.67 | 2.41 | 30,500 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 70 | 73 | 2.65 | 73.67 | 2.41 | 32,800 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 75 | 78 | 2.65 | 78.68 | 2.41 | 35,200 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 80 | 83.5 | 2.65 | 84.19 | 2.41 | 37,500 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 85 | 88.5 | 3.15 | 89.2 | 2.91 | 48,100 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 90 | 93.5 | 3.15 | 94.21 | 2.91 | 51,000 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 95 | 98.5 | 3.15 | 99.24 | 2.91 | 53,800 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
| 100 | 103.5 | 3.15 | 104.29 | 2.91 | 56,600 | May Be Mildly Magnetic | DIN 472 | 1 | 000000000 | 00000 |
Internal Retaining Ring Assortments
Pull ring ends together with retaining ring pliers and place into the bore of a shaft or housing. Release to spring into the groove. All are magnetic.
Black-phosphate steel retaining rings resist corrosion in dry environments.
| Number of Pieces | Sizes Included | Container Type | Specifications Met | Each | |
Metric | |||||
|---|---|---|---|---|---|
Black-Phosphate Steel | |||||
| 240 | For 8 mm to 32 mm ID | Plastic Box | DIN 472 | 000000000 | 000000 |