Specifications Met Specifications Met | Show |
---|
|
Specifications Met Specifications Met | Hide |
---|
|
System of Measurement System of Measurement |
---|
|
For OD For OD |
---|
|
For Groove Diameter For Groove Diameter |
---|
|
|
|
Retaining Ring Style Retaining Ring Style |
---|
![]() | ![]() |
Standard | Side Mount |
Material Material |
---|
|
Finish Finish |
---|
|
Ring OD Ring OD |
---|
Ring Thickness Ring Thickness |
---|
|
|
For Groove Width For Groove Width |
---|
|
|
Minimum Hardness Minimum Hardness |
---|
|
Thrust Load Capacity Thrust Load Capacity |
---|
|
Magnetic Properties Magnetic Properties |
---|
|
Passivation Passivation |
---|
|
E-Style Side-Mount External Retaining Rings Included E-Style Side-Mount ExternalRetaining Rings Included |
---|
Container Type Container Type |
---|
|
For Shaft End Type For Shaft End Type |
---|
|
Container Features Container Features |
---|
|
Also known as E-style rings, these rings have three prongs that make contact with the shaft and provide a wider shoulder than other external rings for a larger retaining surface. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side of the shaft. Ring OD is measured with the ring uninstalled.
1060-1090 spring steel and spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, a zinc yellow-chromate plated finish has some corrosion resistance, and a zinc-chromate plated finish has good corrosion resistance.
DIN 1.4122 stainless steel rings withstand wear caused by abrasion, similar to 400 series stainless steel. Rings are passivated for added protection against corrosion.
15-7 PH stainless steel rings have high strength with good corrosion resistance. Rings are passivated for added protection against corrosion.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
For technical drawings and 3-D models, click on a part number.
For Groove | Ring | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For OD, mm | Dia., mm | Wd., mm | OD, mm | Thick., mm | Min. Hardness | Thrust Load Capacity, lbs. | Magnetic Properties | Specifications Met | Pkg. Qty. | Pkg. | |
Black-Phosphate 1060-1090 Spring Steel | |||||||||||
3-4 | 2.3 | 0.64 | 5.9 | 0.6 | Rockwell C46 | 110 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
4-5 | 3.2 | 0.64 | 6.9 | 0.6 | Rockwell C46 | 140 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
5-7 | 4 | 0.74 | 8.85 | 0.7 | Rockwell C46 | 210 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
6-8 | 5 | 0.74 | 10.85 | 0.7 | Rockwell C46 | 250 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
7-9 | 6 | 0.74 | 11.8 | 0.7 | Rockwell C46 | 300 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
8-11 | 7 | 0.94 | 13.8 | 0.9 | Rockwell C46 | 400 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
9-12 | 8 | 1.05 | 15.75 | 1 | Rockwell C46 | 560 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
10-14 | 9 | 1.15 | 18.2 | 1.1 | Rockwell C46 | 670 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
11-15 | 10 | 1.25 | 19.7 | 1.2 | Rockwell C46 | 780 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
13-18 | 12 | 1.35 | 22.7 | 1.3 | Rockwell C46 | 1,050 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
16-24 | 15 | 1.55 | 28.7 | 1.5 | Rockwell C46 | 1,750 | Magnetic | DIN 6799 | 25 | 000000000 | 00000 |
20-31 | 19 | 1.8 | 36.5 | 1.75 | Rockwell C46 | 2,470 | Magnetic | DIN 6799 | 10 | 000000000 | 0000 |
25-38 | 24 | 2.05 | 43.5 | 2 | Rockwell C46 | 3,370 | Magnetic | DIN 6799 | 10 | 000000000 | 0000 |
32-42 | 30 | 2.55 | 51.3 | 2.5 | Rockwell C46 | 5,170 | Magnetic | DIN 6799 | 5 | 000000000 | 0000 |
Black-Phosphate Spring Steel | |||||||||||
1-1.4 | 0.8 | 0.24 | 1.95 | 0.2 | Rockwell C46 | 10 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
1.4-2 | 1.2 | 0.34 | 2.9 | 0.3 | Rockwell C46 | 20 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
2-2.5 | 1.5 | 0.44 | 3.9 | 0.4 | Rockwell C46 | 40 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
2.5-3 | 1.9 | 0.54 | 4.4 | 0.5 | Rockwell C46 | 70 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
Zinc-Chromate-Plated 1060-1090 Spring Steel | |||||||||||
2.5-3 | 1.9 | 0.54 | 4.4 | 0.5 | Rockwell C46 | 70 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
3-4 | 2.3 | 0.64 | 5.9 | 0.6 | Rockwell C46 | 110 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
4-5 | 3.2 | 0.64 | 6.9 | 0.6 | Rockwell C46 | 140 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
5-7 | 4 | 0.74 | 8.85 | 0.7 | Rockwell C46 | 210 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
6-8 | 5 | 0.74 | 10.85 | 0.7 | Rockwell C46 | 250 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
7-9 | 6 | 0.74 | 11.8 | 0.7 | Rockwell C46 | 300 | Magnetic | DIN 6799 | 100 | 000000000 | 0000 |
8-11 | 7 | 0.94 | 13.8 | 0.9 | Rockwell C46 | 400 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
9-12 | 8 | 1.05 | 15.75 | 1 | Rockwell C46 | 560 | Magnetic | DIN 6799 | 100 | 000000000 | 00000 |
10-14 | 9 | 1.15 | 18.2 | 1.1 | Rockwell C46 | 670 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
11-15 | 10 | 1.25 | 19.7 | 1.2 | Rockwell C46 | 780 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
13-18 | 12 | 1.35 | 22.7 | 1.3 | Rockwell C46 | 1,050 | Magnetic | DIN 6799 | 50 | 000000000 | 00000 |
16-24 | 15 | 1.55 | 28.7 | 1.5 | Rockwell C46 | 1,750 | Magnetic | DIN 6799 | 10 | 000000000 | 0000 |
20-31 | 19 | 1.8 | 36.5 | 1.75 | Rockwell C46 | 2,470 | Magnetic | DIN 6799 | 10 | 000000000 | 0000 |
25-38 | 24 | 2.05 | 43.5 | 2 | Rockwell C46 | 3,370 | Magnetic | DIN 6799 | 10 | 000000000 | 00000 |
32-42 | 30 | 2.55 | 51.3 | 2.5 | Rockwell C46 | 5,170 | Magnetic | DIN 6799 | 5 | 000000000 | 0000 |
15-7 PH Stainless Steel | |||||||||||
25-38 | 24 | 2.05 | 43.5 | 2 | Rockwell C44 | 3,370 | Magnetic | DIN 6799 | 1 | 000000000 | 0000 |
DIN 1.4122 Stainless Steel | |||||||||||
1.4-2 | 1.2 | 0.34 | 2.9 | 0.3 | Not Rated | 20 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
2-2.5 | 1.5 | 0.44 | 3.9 | 0.4 | Not Rated | 40 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
2.5-3 | 1.9 | 0.54 | 4.4 | 0.5 | Not Rated | 70 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
3-4 | 2.3 | 0.64 | 5.9 | 0.6 | Rockwell C44 | 110 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
4-5 | 3.2 | 0.64 | 6.9 | 0.6 | Rockwell C44 | 140 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
5-7 | 4 | 0.74 | 8.85 | 0.7 | Rockwell C44 | 210 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
6-8 | 5 | 0.74 | 10.85 | 0.7 | Rockwell C44 | 250 | Magnetic | DIN 6799 | 50 | 000000000 | 0000 |
7-9 | 6 | 0.74 | 11.8 | 0.7 | Rockwell C44 | 300 | Magnetic | DIN 6799 | 25 | 000000000 | 0000 |
8-11 | 7 | 0.94 | 13.8 | 0.9 | Rockwell C44 | 400 | Magnetic | DIN 6799 | 25 | 000000000 | 0000 |
9-12 | 8 | 1.05 | 15.75 | 1 | Rockwell C44 | 560 | Magnetic | DIN 6799 | 10 | 000000000 | 0000 |
10-14 | 9 | 1.15 | 18.2 | 1.1 | Rockwell C44 | 670 | Magnetic | DIN 6799 | 10 | 000000000 | 0000 |
11-15 | 10 | 1.25 | 19.7 | 1.2 | Rockwell C44 | 780 | Magnetic | DIN 6799 | 5 | 000000000 | 0000 |
13-18 | 12 | 1.35 | 22.7 | 1.3 | Rockwell C44 | 1,050 | Magnetic | DIN 6799 | 5 | 000000000 | 0000 |
16-24 | 15 | 1.55 | 28.7 | 1.5 | Rockwell C44 | 1,750 | Magnetic | DIN 6799 | 1 | 000000000 | 0000 |
20-31 | 19 | 1.8 | 36.5 | 1.75 | Rockwell C47 | 2,470 | Magnetic | DIN 6799 | 1 | 000000000 | 0000 |
![]() | ![]() C-Style |
![]() E-Style |
Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface. All are magnetic.
Black-phosphate steel retaining rings resist corrosion in dry environments.
Number of Pieces | Sizes Included | Retaining Ring Style | Container Type | Specifications Met | Each | |
Metric | ||||||
---|---|---|---|---|---|---|
Black-Phosphate Steel | ||||||
300 | For 3 mm to 20 mm OD | E | Plastic Box | DIN 6799 | 000000000 | 000000 |
These assortments include pliers to install external and internal rings. Made from black-phosphate steel, these rings resist corrosion in dry environments and are magnetic.
Number of Pieces | Includes | Tools Included | Container Type | Specifications Met | Each | |
Metric | ||||||
---|---|---|---|---|---|---|
Black-Phosphate Steel | ||||||
380 | 120 External Retaining Rings (For 8 mm to 20 mm OD) 120 Internal Retaining Rings (For 8 mm to 20 mm ID) 140 E-Style Side-Mount External Retaining Rings (For 3 mm to 12 mm OD) | External/Internal Ring Pliers | Plastic Box | DIN 6799 | 000000000 | 0000000 |