DIN 6880 Machine Keys | McMaster-Carr

Clear All

	Specifications Met Specifications Met	Show

DIN

DIN 6880

	Specifications Met Specifications Met	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	System of Measurement System of Measurement

Metric

	Width Width

	Height Height

	Length Length

305mm

1,000mm

	Material Material

Steel

Stainless Steel

Brass

	Finish Finish

Zinc Plated

	Tolerance Rating Tolerance Rating

Undersized

Oversized

	Key Type Key Type

	Straight

	Minimum Hardness Minimum Hardness

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

DFARS Specialty Metals
Compliant

Forward

How can we improve?

200 Products

Machine Key Stock

Cut this square or rectangular key stock to length to create a straight machine key. Straight keys are the most common type of key. Machine keys are often the same material and as hard or harder than the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.

Steel key stock is an economical choice with good strength. 4140 alloy steel key stock has greater strength and toughness after hardening than carbon steel, making it useful for high-stress applications. Zinc-plated steel key stock resists corrosion in wet environments.

Stainless steel key stock is more corrosion resistant than steel key stock. 18-8 stainless steel key stock offers a balance of strength and corrosion resistance. It may be mildly magnetic. 304 stainless steel key stock offers a good balance of strength, corrosion resistance, and machinability. 316 stainless steel key stock has the best corrosion resistance of our stainless steel key stock and may be mildly magnetic.

Brass key stock is corrosion resistant and nonmagnetic. Brass is softer than other metals, so it's often used for shear keys.

Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway. Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.

Key stock that meets DIN 6880 conforms to DIN standards for undersized keys.

For technical drawings and 3-D models, click on a part number.

1018-1045 Carbon Steel

		Tolerance
Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Minimum Hardness	Specifications Met		Each
305mm Lg.
2mm × 2mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
3mm × 3mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
3mm × 5mm	Undersized	-0.060mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
4mm × 4mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
4mm × 6mm	Undersized	-0.075mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
4mm × 7mm	Undersized	-0.030mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
5mm × 5mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
5mm × 8mm	Undersized	-0.030mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
6mm × 6mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
6mm × 10mm	Undersized	-0.030mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
6mm × 12mm	Undersized	-0.075mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
6mm × 14mm	Undersized	-0.075mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
7mm × 7mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
7mm × 8mm	Undersized	-0.090mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
7mm × 18mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
8mm × 8mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
8mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
8mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
8mm × 20mm	Undersized	-0.090mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
9mm × 14mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
10mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
10mm × 16mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
11mm × 18mm	Undersized	-0.110mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
12mm × 12mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
12mm × 20mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
14mm × 14mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
14mm × 22mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
14mm × 25mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
16mm × 16mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
16mm × 28mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
18mm × 18mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
18mm × 32mm	Undersized	-0.110mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
20mm × 20mm	Undersized	-0.052mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
20mm × 36mm	Undersized	-0.130mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
22mm × 22mm	Undersized	-0.052mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
22mm × 40mm	Undersized	-0.130mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
25mm × 45mm	Undersized	-0.130mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
28mm × 50mm	Undersized	-0.130mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
1,000mm Lg.
2mm × 2mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
3mm × 3mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
3mm × 5mm	Undersized	-0.060mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
4mm × 4mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
4mm × 6mm	Undersized	-0.075mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
4mm × 7mm	Undersized	-0.030mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
5mm × 5mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	0000
5mm × 8mm	Undersized	-0.030mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
6mm × 6mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
6mm × 10mm	Undersized	-0.030mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
6mm × 12mm	Undersized	-0.075mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
6mm × 14mm	Undersized	-0.075mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
7mm × 7mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
7mm × 8mm	Undersized	-0.090mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
8mm × 8mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
8mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
8mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
9mm × 14mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
10mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
10mm × 16mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
11mm × 18mm	Undersized	-0.110mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
12mm × 12mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
12mm × 20mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
14mm × 14mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
14mm × 22mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
14mm × 25mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	000000
16mm × 16mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
16mm × 28mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	000000
18mm × 18mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
18mm × 32mm	Undersized	-0.110mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B87	DIN 6880	000000000	000000
20mm × 20mm	Undersized	-0.052mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	00000
20mm × 36mm	Undersized	-0.130mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B87	DIN 6880	000000000	000000
22mm × 22mm	Undersized	-0.052mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B87	DIN 6880	000000000	000000
22mm × 40mm	Undersized	-0.130mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B87	DIN 6880	000000000	000000
25mm × 45mm	Undersized	-0.130mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B87	DIN 6880	000000000	000000

4140 Alloy Steel

		Tolerance
Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Minimum Hardness	Specifications Met		Each
305mm Lg.
2mm × 2mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
4mm × 4mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B90	DIN 6880	000000000	0000
5mm × 5mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B90	DIN 6880	000000000	0000
6mm × 6mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B90	DIN 6880	000000000	0000
7mm × 8mm	Undersized	-0.090mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B90	DIN 6880	000000000	0000
8mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
8mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
9mm × 14mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
11mm × 18mm	Undersized	-0.110mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
12mm × 12mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
1,000mm Lg.
2mm × 2mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B90	DIN 6880	000000000	0000
4mm × 4mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B90	DIN 6880	000000000	0000
5mm × 5mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
6mm × 6mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
7mm × 8mm	Undersized	-0.090mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
8mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
8mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000
9mm × 14mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B90	DIN 6880	000000000	00000

Zinc-Plated 1018-1045 Carbon Steel

		Tolerance
Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Minimum Hardness	Specifications Met		Each
305mm Lg.
4mm × 4mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
5mm × 5mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	0000
5mm × 8mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	0000
6mm × 6mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	0000
6mm × 10mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
6mm × 12mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
6mm × 14mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
7mm × 7mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	0000
7mm × 8mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	0000
7mm × 16mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
7mm × 18mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
8mm × 8mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	0000
8mm × 10mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	0000
8mm × 12mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	0000
8mm × 20mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
9mm × 14mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
9mm × 22mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
10mm × 10mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
10mm × 12mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
10mm × 16mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
11mm × 18mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
12mm × 12mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
12mm × 20mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
14mm × 14mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
14mm × 22mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
14mm × 25mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
16mm × 16mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
16mm × 28mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
18mm × 18mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
18mm × 32mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
20mm × 20mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
20mm × 36mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
22mm × 22mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
22mm × 40mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
25mm × 25mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000
25mm × 28mm	Oversized	0.000mm to 0.076mm	0.000mm to 0.076mm	Rockwell B87	DIN 6880	000000000	00000

18-8 Stainless Steel

		Tolerance
Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Minimum Hardness	Specifications Met		Each
305mm Lg.
3mm × 3mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Not Rated	DIN 6880	000000000	000000
4mm × 4mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Not Rated	DIN 6880	000000000	00000
5mm × 5mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Not Rated	DIN 6880	000000000	0000
6mm × 6mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Not Rated	DIN 6880	000000000	00000
8mm × 8mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Not Rated	DIN 6880	000000000	00000

304 Stainless Steel

		Tolerance
Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Minimum Hardness	Specifications Met		Each
305mm Lg.
2mm × 2mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B80	DIN 6880	000000000	000000
4mm × 6mm	Undersized	-0.075mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
6mm × 10mm	Undersized	-0.030mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
7mm × 8mm	Undersized	-0.090mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
8mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
8mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
9mm × 14mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
1,000mm Lg.
2mm × 2mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
3mm × 5mm	Undersized	-0.060mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
4mm × 4mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
4mm × 6mm	Undersized	-0.075mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
5mm × 5mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
6mm × 6mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
7mm × 8mm	Undersized	-0.090mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
8mm × 8mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
8mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
8mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B80	DIN 6880	000000000	00000
9mm × 14mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B80	DIN 6880	000000000	000000

316 Stainless Steel

		Tolerance
Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Minimum Hardness	Specifications Met		Each
305mm Lg.
2mm × 2mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
3mm × 3mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
3mm × 3mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B86	DIN 6880	000000000	0000
4mm × 4mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
4mm × 6mm	Undersized	-0.075mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
5mm × 5mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B86	DIN 6880	000000000	0000
6mm × 6mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
7mm × 7mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
7mm × 8mm	Undersized	-0.090mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
8mm × 8mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
8mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
8mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
9mm × 14mm	Undersized	-0.090mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
10mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
10mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
10mm × 16mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
11mm × 18mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
12mm × 12mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
12mm × 20mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
14mm × 14mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
14mm × 22mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B86	DIN 6880	000000000	000000
14mm × 25mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
16mm × 16mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B86	DIN 6880	000000000	00000
16mm × 28mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
18mm × 32mm	Undersized	-0.110mm to 0.000mm	-0.062mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
1,000mm Lg.
3mm × 3mm	Undersized	-0.025mm to 0.000mm	-0.025mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
3mm × 5mm	Undersized	-0.060mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
4mm × 4mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
5mm × 5mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
6mm × 6mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
7mm × 7mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
7mm × 8mm	Undersized	-0.090mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
8mm × 8mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
8mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
8mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
9mm × 14mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
10mm × 10mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B85	DIN 6880	000000000	00000
10mm × 12mm	Undersized	-0.036mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
10mm × 16mm	Undersized	-0.090mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
11mm × 18mm	Undersized	-0.110mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
12mm × 12mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
14mm × 14mm	Undersized	-0.043mm to 0.000mm	-0.043mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
14mm × 22mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
14mm × 25mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000
16mm × 28mm	Undersized	-0.110mm to 0.000mm	-0.052mm to 0.000mm	Rockwell B85	DIN 6880	000000000	000000

360 Brass

		Tolerance
Ht. × Wd.	Tolerance Rating	Ht.	Wd.	Minimum Hardness	Specifications Met		Each
305mm Lg.
3mm × 3mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B35	DIN 6880	000000000	000000
4mm × 4mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B35	DIN 6880	000000000	00000
5mm × 5mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B35	DIN 6880	000000000	00000
6mm × 6mm	Undersized	-0.030mm to 0.000mm	-0.030mm to 0.000mm	Rockwell B35	DIN 6880	000000000	00000
8mm × 8mm	Undersized	-0.036mm to 0.000mm	-0.036mm to 0.000mm	Rockwell B35	DIN 6880	000000000	00000