DIN Rails
Mount terminal blocks, power supplies, relays, and other control and distribution devices on walls and other flat surfaces and in enclosures.
For technical drawings and 3-D models, click on a part number.
Stops and Spacers for DIN Rails
Position terminal blocks, relays, and other components mounted to DIN rails with these stops and spacers. They are often used to create space between components for cooling, make wiring easier, and organize electrical panels and cabinets.
Stops stay fixed in place when you attach them to a DIN rail, keeping your components from sliding along the rail. For the most secure hold, use screw-on stops. As you tighten the screw, it wedges into place against the DIN rail.
Group markers mount onto stops—label them for easy identification.
Mounting Brackets for DIN Rails
Use these brackets for extra mounting space behind DIN rail to accommodate wiring and bulky items. Brackets with multiple DIN rail mounting holes hold several DIN rails on one set of brackets, so you don’t need to drill as many holes in your enclosure.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For DIN Rail Trade Size | Ht., mm | Wd., mm | Dp., mm | Top Dp., mm | Material | Mounting Fasteners Included | Dia. | No. of | DIN Rail Mounting Fasteners Included | DIN Rail Mounting Hole Size (No. of) | Pkg. Qty. | Each | |
Angled | |||||||||||||
| DIN 3, DIN 2, DIN 1 | 80 | 25 | 50 | 25 | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 97 | 18 | 48 | 32 | Zinc-Plated Steel | No | 4.3 mm | 2 | No | 4.3 mm (1) | __ | 0000000 | 00000 |
Straight | |||||||||||||
| DIN 3, DIN 2, DIN 1 | 80 | 20 | 25 | __ | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 0000 |
| DIN 3, DIN 2, DIN 1 | 80 | 20 | 50 | __ | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 0000 |
| DIN 3, DIN 2, DIN 1 | 80 | 20 | 70 | __ | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 0000 |
| DIN 3, DIN 2, DIN 1 | 80 | 20 | 90 | __ | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 0000 |
| Pkg. | |||||||||||||
| DIN 3, DIN 2, DIN 1 | 121 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (2), M5 × 0.8 mm (3) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 171 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (4), M5 × 0.8 mm (5) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 201 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (5), M5 × 0.8 mm (6) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 221 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (6), M5 × 0.8 mm (7) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 271 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (8), M5 × 0.8 mm (9) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 321 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (10), M5 × 0.8 mm (11) | 2 | 0000000 | 00000 |
DIN-Rail Cutters
Pull the lever on these cutters to make smooth cuts in steel and aluminum DIN rail without leaving a bur. To cut the same length over and over, slide the stop along the ruler and clamp in place. Cutters mount to your workbench.
Cutters with hole punch stamp an oblong hole. Turn the die to cut a hole parallel or perpendicular to the rail.
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cutting Trade Size (Height × Depth × Overall Depth) | Height | Width | Length | Handle Length | Ruler Length | Mounting Fasteners Included | Number of | Diameter | Features | Each | |
| DIN 3 Rail (35 × 7.5 mm) DIN 3 Rail (35 × 15 mm) DIN 2 Rail (15 × 5.5 mm) DIN 1 Rail (32 × 15 mm) | 47" | 6" | 54" | 40" | 39"/100 cm | No | 4 | 0.39" | 12 × 6.4 mm Hole Punch | 0000000 | 000000000 |