Color Color |
---|
Container Type Container Type |
---|
![]() | ![]() |
Aerosol Can | Can |
![]() | ![]() |
Bag | Pen |
![]() | |
Pail |
For Use On For Use On |
---|
Type Type |
---|
|
Container Size Container Size |
---|
|
|
|
Composition Composition |
---|
|
Appearance Appearance |
---|
|
|
Formulation Formulation |
---|
|
|
Maximum Temperature Maximum Temperature |
---|
|
Touch Dry Time Touch Dry Time |
---|
|
|
|
Overall Dry Time Overall Dry Time |
---|
|
|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Paint Type Paint Type |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
For Topcoat Composition For Topcoat Composition |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Primer Type Primer Type |
---|
|
About Paint and Protective Coatings
More
Paint for Metal


Paint metal surfaces to stop rust from starting and prevent existing rust from spreading. Scrape rusty areas clean before application. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life and corrosion resistance of paint.
Acrylic paint is water-based and can be cleaned up with soap and water. It’s also known as latex paint. Paint with a 7-day overall dry time resists weather and mild chemicals once fully dry.
Silicone paint stops corrosion on high-temperature surfaces, such as smokestacks, incinerators, heaters, and heat exchangers. To apply paint with a 2-hour overall dry time, spray paint on, and then increase the temperature two to three times (450° to 650° F), allowing surface to cool between firings.
Paint in an aerosol can does not require a primer.
Apply paint in a one-gallon can with a brush, roller, or sprayer.
Safety-color paint comes in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety red indicates danger and is often used on fire protection equipment, containers for flammable liquid, and switches on machinery. Safety orange indicates hazards and is often used on warning signs, construction equipment, and unguarded edges. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons. Safety green indicates general safety and is often used to identify first aid kits and other medical equipment and to explain safety procedures. Safety blue is used on “out of order,” “employees only,” and other general-information signs. Safety purple indicates radiation hazards, especially when used with safety yellow.
Paint that cannot be sold to the regions listed exceeds local regulatory limits on VOC (volatile organic compounds).
Paint | Primer | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container | Dry Time | Each | Each | ||||||||||||||
Size, gal. | Net Weight, oz. | Composition | Touch | O'all | Approx. Coverage @ Thick. | Max. Temp., °F | For Use On | Primer Required For Use On | Cannot Be Sold To | Choose a Color (Appearance) | 1-5 | 6-Up | Choose a Color | 1-5 | 6-Up | ||
Silicone—Aerosol Can | |||||||||||||||||
__ | 11 | Solvent Based | 30 min. | 2 hrs. | 20 sq. ft. @ 1 mil | 1200° | Steel, Stainless Steel | __ | __ | 000000 | 000000 | 00000 | __ | 000000 | 00 | 00 | |
Alkyd—Aerosol Can | |||||||||||||||||
__ | 15 | Solvent Based | 20 min. | 24 hrs. | 15 sq. ft. @ 1 mil | 200° | Aluminum, Steel, Iron, Masonry, Concrete, Wood | Iron, Masonry, Concrete, Wood | __ | Aluminum (Gloss), Black (Flat), Black (Gloss), Black (Semi-Gloss), Brown (Gloss), Dark Blue (Gloss), Dark Gray (Gloss), Dark Green (Gloss), Dark Red (Gloss), Light Gray (Gloss), Safety Blue (Gloss), Safety Green (Gloss), Safety Purple (Gloss), Safety Red (Gloss), Safety Yellow (Gloss), Safety Orange (Gloss), Tan (Gloss), White (Flat), White (Gloss) | 000000 | 00000 | 00000 | 000000 | 000000 | 000000 | |
Silicone—Can | |||||||||||||||||
1 | __ | Solvent Based | 2 hrs. | 24 hrs. | 270 sq. ft. @ 2 mil | 1000° | Steel, Stainless Steel | Steel, Stainless Steel | __ | 000000 | 000000 | 00 | 0000000 | 000000 | 00 | ||
Acrylic—Can | |||||||||||||||||
1 | __ | Water Based | 45 min. | 7 days | 150 sq. ft. @ 2 mil | 200° | Aluminum, Brass, Bronze, Copper, Steel, Iron, Galvanized Iron, Galvanized Steel | __ | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 00000 | 00 | __ | 000000 | 00 | 00 |
Touch-Up Paint Pens for Metal


Prep, paint, and seal small scratches on metal surfaces with these pens.
Black pens have a beveled abrasive tip to remove rust and clean the surface. They have a roller-ball tip for precision paint application and a brush tip for general use. Once the paint dries, use the foam tip to apply the clear coat included in the pen’s base.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Composition | Formulation | Touch | O'all, min. | Max. Temp., °F | For Use Outdoors | For Use On | Color (Appearance) | Each | |
0.3 | Solvent Based | Acrylic Lacquer | 30 sec. | 1 | Not Rated | No | Aluminum, Steel, Iron | White (Gloss) | 00000000 | 000000 |
0.5 | Solvent Based | Lacquer | 20 min. | 30 | 95 | No | Steel, Iron | Black (Flat) | 0000000 | 00000 |
0.5 | Solvent Based | Lacquer | 20 min. | 30 | 95 | No | Steel, Iron | Black (Gloss) | 0000000 | 00000 |
Low-Odor Paint for Metal
Use this low-VOC paint in enclosed spaces to stop rust from starting and prevent existing rust from spreading. It resists weather, salt spray, mild chemicals, and abrasion. Apply with a brush, roller, or sprayer.
Safety-color paint comes in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety red indicates danger and is often used on fire protection equipment, containers for flammable liquid, and switches on machinery. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons. Safety blue is used on “out of order,” “employees only,” and other general-information signs.
Paint that cannot be sold to Canada is subject to product restrictions.


Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Formulation | Touch, hrs. | O'all, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Use Outdoors | For Use On | Cannot Be Sold To | Color (Appearance) | Each | |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Black (Flat) | 00000000 | 0000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Black (Gloss) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Black (Satin) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Gray (Gloss) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Gray (Satin) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Safety Blue (Gloss) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Safety Red (Gloss) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Safety Yellow (Gloss) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Silver (Gloss) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Silver (Satin) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Tan (Gloss) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | Tan (Satin) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | White (Gloss) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | White (Satin) | 00000000 | 000000 |
1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | Canada | Dark Green (Gloss) | 0000000 | 000000 |
5 | Solvent Based | Alkyd | 6 | 24 | 1,500 sq. ft. @ 2 mil | 120° | Yes | Steel | __ | White (Satin) | 00000000 | 000000 |
Powder-Coating Touch-Up Paint for Metal

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.
Dry Time | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Composition | Formulation | Touch, hrs. | O'all, hrs. | Approx. Coverage @ Thick. | Spray Position | Max. Temp., °F | For Use Outdoors | For Use On | Choose a Color (Appearance) | 1-5 | 6-Up | |
16 | Solvent Based | Acrylic | 4 | 24 | 144 sq. ft. @ 2 mil | Upright | 120° | Yes | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Galvanized Iron, Galvanized Steel, Titanium, Silver | 000000 | 000000 | 000000 |
Hammered-Texture Paint for Metal


Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading. Paint cannot be sold to the regions listed due to local regulatory limits on VOCs (volatile organic compounds).
Paint in an aerosol can dries quickly to prevent dust and debris from adhering.
Apply paint in a one-quart can with a brush, roller, or sprayer.
Container | Dry Time | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, qt. | Net Weight, oz. | Composition | Formulation | Touch, min. | O'all, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Use Outdoors | For Use On | Cannot Be Sold To | Choose a Color (Appearance) | 1-5 | 6-Up | |
Aerosol Can | ||||||||||||||
__ | 12 | Solvent Based | Alkyd | 15 | 24 | 4 sq. ft. @ 1 mil | 200° | Yes | Aluminum, Steel, Iron, Wood | Canada | 00000000 | 000000 | 000000 | |
Can | ||||||||||||||
1 | __ | Solvent Based | Alkyd | 30 | 24 | 75 sq. ft. @ 1 mil | 200° | Yes | Aluminum, Steel, Iron | Canada; Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 00000000 | 00000 | 00 |
Drip-Free Paint for Metal

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries. For best results, use a primer with new or rusted metal and with new wood.
Dry Time | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Composition | Formulation | Touch, min. | O'all, min. | Approx. Coverage @ Thick. | Spray Position | Max. Temp., °F | For Use Outdoors | For Use On | Choose a Color (Appearance) | 1-5 | 6-Up | |
12 | Water Based | Acrylic Lacquer | 12 | 30 | 15 sq. ft. @ 1 mil | Upright | 150° | Yes | Aluminum, Steel, Iron, Wood | 000000 | 000000 | 000000 |
Galvanizing Zinc Coatings for Metal


These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion. They're designed for outdoor use, but can also be used indoors in well-ventilated areas.
Coatings with 99% zinc withstand temperatures up to 750° F.
Apply coatings in a can with a brush, roller, or sprayer.
Coatings that cannot be sold to Canada are restricted by product labeling requirements. Coatings that cannot be sold to the Los Angeles area, CA, CO, CT, DE, MD, NY, RI, and UT are restricted by VOC regulations.
Container | Dry Time | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Net Weight | Composition | Material Composition, Zinc | Touch, min. | Overall, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | Application Temp. Range, °F | Specifications Met | For Use On | Color (Appearance) | Cannot Be Sold To | Pkg. Qty. | Each | |
__ | 12 oz. | Solvent Based | 10% | 10 | 24 | 19 sq. ft. @ 1 mil | 150° | 60° to 90° | __ | Steel, Iron | Chrome (Gloss) | __ | __ | 0000000 | 000000 |
Pkg. | |||||||||||||||
__ | 12 oz. | Solvent Based | 10% | 10 | 24 | 19 sq. ft. @ 1 mil | 150° | 60° to 90° | __ | Steel, Iron | Chrome (Gloss) | __ | 12 | 00000000 | 000000 |
Each | |||||||||||||||
Aerosol Can Coatings | |||||||||||||||
__ | 13 oz. | Solvent Based | 93% | 15 | 24 | 24 sq. ft. @ 1 mil | 150° | 50° to 90° | MIL-P-21035 | Steel, Iron | Gray (Flat) | __ | __ | 000000 | 00000 |
__ | 13 oz. | Solvent Based | 65% | 15 | 24 | 13 sq. ft. @ 1 mil | 150° | 60° to 80° | __ | Steel, Iron | Gray (Satin) | __ | __ | 000000 | 00000 |
__ | 14 oz. | Solvent Based | 99% | 5 | 24 | 50 sq. ft. @ 1 mil | 750° | 60° to 90° | __ | Steel, Iron | Gray (Satin) | Canada | __ | 000000 | 00000 |
Pkg. | |||||||||||||||
__ | 13 oz. | Solvent Based | 93% | 15 | 24 | 24 sq. ft. @ 1 mil | 150° | 50° to 90° | MIL-P-21035 | Steel, Iron | Gray (Flat) | __ | 12 | 00000000 | 000000 |
__ | 13 oz. | Solvent Based | 65% | 15 | 24 | 13 sq. ft. @ 1 mil | 150° | 60° to 80° | __ | Steel, Iron | Gray (Satin) | __ | 12 | 00000000 | 000000 |
Each | |||||||||||||||
Can Coatings | |||||||||||||||
1 qt. | __ | Solvent Based | 93% | 20 | 48 | 105 sq. ft. @ 2 mil | 150° | 50° to 90° | MIL-P-21035 | Steel, Iron | Gray (Flat) | __ | __ | 0000000 | 00000 |
1 qt. | __ | Solvent Based | 65% | 15 | 72 | 40 sq. ft. @ 2 mil | 350° | 60° to 80° | __ | Steel, Iron | Gray (Satin) | __ | __ | 000000 | 00000 |
1 gal. | __ | Solvent Based | 99% | 5 | 24 | 500 sq. ft. @ 2 mil | 750° | 60° to 90° | __ | Steel, Iron | Gray (Satin) | CA, CO, CT, DE, MD, NY, RI, UT | __ | 00000000 | 000000 |
1 gal. | __ | Solvent Based | 93% | 20 | 72 | 435 sq. ft. @ 2 mil | 150° | 60° to 80° | MIL-P-21035 | Steel, Iron | Gray (Flat) | __ | __ | 0000000 | 000000 |
1 gal. | __ | Solvent Based | 65% | 20 | 72 | 175 sq. ft. @ 2 mil | 150° | 60° to 80° | __ | Steel, Iron | Gray (Satin) | Los Angeles Area | __ | 00000000 | 000000 |
Pkg. | |||||||||||||||
1 qt. | __ | Solvent Based | 93% | 20 | 48 | 105 sq. ft. @ 2 mil | 150° | 50° to 90° | MIL-P-21035 | Steel, Iron | Gray (Flat) | __ | 4 | 00000000 | 000000 |
Epoxy Coatings for Metal


Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight. They cannot be sold to the regions listed because they exceed local regulatory limits on VOC (volatile organic compounds).
Apply coatings in a two-gallon can with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
Safety-color coatings come in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons.
Epoxy Coatings for Metal | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container | Dry Time | Thinners | |||||||||||||
Size, gal. | Net Weight, oz. | Composition | Touch | Overall, hrs. | Approx. Coverage @ Thick. | Application Time After Mixing, hrs. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Cannot Be Sold To | Each | Each | ||
Aerosol Can Coatings | |||||||||||||||
__ | 12 | Solvent Based | 20 min. | 48 | 3 sq. ft. @ 1 mil | __ | 150° | 65° to 90° | Steel, Iron, Drywall, Wood | CA | 000000 | 000000 | 000000 | 00 | |
Can Coatings | |||||||||||||||
2 | __ | Solvent Based | 8 hrs. | 16 | 220 sq. ft. @ 5 mil | 2.5 | 300° | 50° to 100° | Steel, Iron, Masonry, Concrete | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 000000 | 000000 | 0000000 | 000000 |
Powder Coatings

More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system. Apply directly to unpainted metal and heat-cure in an oven for a smooth, baked-on finish. Before using this powder on aluminum, completely clear the surface of any aluminum oxides.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Composition | Touch, min. | Overall, min. | Approx. Coverage @ Thick. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Choose a Color (Appearance) | Each | |
16 | Solvent Based | 10 | 10 | 68 sq. ft. @ 2 mil | 350° | 50° to 80° | Aluminum, Brass, Bronze, Copper, Steel, Titanium, Iron | 0000000 | 000000 |
Touch-Up Plastic Coating Pens for Metal

Seal out moisture on scratched painted metal.
Dry Time | |||||||||
---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Composition | Formulation | Touch, min. | O'all, hrs. | For Use Outdoors | For Use On | Color | Each | |
0.5 | Solvent Based | Acrylic | 30 | 24 | Yes | Steel, Iron | Clear | 0000000 | 000000 |
Plastic Coatings for Nonferrous Metal

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.
Dry Time | Each | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Composition | Touch, min. | O'all, hrs. | Approximate Coverage @ Thickness | Max. Temp., °F | Application Temp. Range, °F | For Use Outdoors | For Use On | Color (Appearance) | 1-11 | 12-Up | |
Lacquer | ||||||||||||
12 | Solvent Based | 5 | 8 | 10 sq. ft. @ 1 mil | 150° | 60° to 80° | No | Brass, Bronze, Copper, Silver | Clear (Gloss) | 00000000 | 000000 | 000000 |
12 | Solvent Based | 5 | 8 | 10 sq. ft. @ 1 mil | 160° | 60° to 80° | Yes | Brass, Bronze, Copper, Silver | Clear (Gloss) | 00000000 | 00000 | 00000 |
Plastic Coatings for Metal

Tough and long-lasting, these flexible coatings protect against rust and corrosion.
Dry Time | Each | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Composition | Touch, min. | O'all, hrs. | Approximate Coverage @ Thickness | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | 1-11 | 12-Up | |
Acrylic | |||||||||||
12 | Solvent Based | 5 | 24 | 14 sq. ft. @ 1 mil | 150° | 55° to 80° | Steel, Iron, Wood | Clear (Gloss) | 000000 | 00000 | 00000 |
12 | Solvent Based | 5 | 24 | 15 sq. ft. @ 1 mil | 150° | 55° to 80° | Steel, Iron, Wood | Clear (Flat) | 000000 | 0000 | 0000 |
Polyurethane Coatings

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Touch, hrs. | O'all, hrs. | Approximate Coverage @ Thickness | Mix Ratio | Application Time After Mixing, hrs. | Max. Temp., °F | Application Temp. Range, °F | For Use Outdoors | For Use On | Choose a Color (Appearance) | Each | |
1 | Solvent Based | 2.5 | 8 | 230 sq. ft. @ 5 mil | 4:1 | 2.5 | 200° | 40° to 120° | Yes | Steel, Iron, Concrete | 00000000 | 0000000 |
Materials for High-Vacuum Thin Film Coatings


Coat knobs, handles, mirrors, and other objects with a micron-thin, decorative finish. 99.999% or 99.88% elementally pure, these metals vaporize when heated with low-voltage current inside a high-vacuum environment. The material then coats the object one atom at a time. Also known as physical vapor deposition (PVD), this process allows for super-thin coatings that are more consistent, wear resistant, and corrosion resistant than coatings created through other methods. Hold and heat the material in a material holder.
All materials will coat metal and plastic with a silvery-white color. Aluminum has a dull appearance. Nickel has a slightly shiny appearance and adds wear resistance to your part. Silver has a shiny appearance and adds corrosion resistance.
Dia. | Lg. | Wd. | Thick. | For Color | For Appearance | Material Composition | Certification | Each | |
25 g | |||||||||
---|---|---|---|---|---|---|---|---|---|
Hook | |||||||||
Aluminum | |||||||||
__ | 1 1/8" | 5/32" | 1/16" | Silver | Dull | 99.88% Aluminum, 0.12% Other | __ | 0000000 | 000000 |
Pellet | |||||||||
Aluminum | |||||||||
1/8" | 1/8" | __ | __ | Silver | Dull | 99.999% Aluminum, 0.001% Other | Material Test Report and Traceable Lot Number | 0000000 | 00000 |
Nickel | |||||||||
1/8" | 1/8" | __ | __ | Silver | Shiny | 99.999% Nickel, 0.001% Other | Material Test Report and Traceable Lot Number | 0000000 | 000000 |
Silver | |||||||||
1/8" | 1/8" | __ | __ | Silver | Shiny | 99.999% Silver, 0.001% Other | Material Test Report and Traceable Lot Number | 0000000 | 000000 |
100 g | |||||||||
Hook | |||||||||
Aluminum | |||||||||
__ | 1 1/8" | 5/32" | 1/16" | Silver | Dull | 99.88% Aluminum, 0.12% Other | __ | 0000000 | 00000 |
Pellet | |||||||||
Aluminum | |||||||||
1/8" | 1/8" | __ | __ | Silver | Dull | 99.999% Aluminum, 0.001% Other | Material Test Report and Traceable Lot Number | 0000000 | 000000 |
Nickel | |||||||||
1/8" | 1/8" | __ | __ | Silver | Shiny | 99.999% Nickel, 0.001% Other | Material Test Report and Traceable Lot Number | 0000000 | 000000 |
Silver | |||||||||
1/8" | 1/8" | __ | __ | Silver | Shiny | 99.999% Silver, 0.001% Other | Material Test Report and Traceable Lot Number | 0000000 | 000000 |
Coatings for Wood
Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.

Container | Dry Time | Each | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Composition | Approx. Coverage @ Thick. | Touch, min. | Overall, min. | Application Temp. Range, °F | Max. Temp., °F | For Use On | Color (Appearance) | 1-11 | 12-Up | |
12 | Aerosol Can | Solvent Based | 8 sq. ft. @ 1 mil | 15 | 60 | 50° to 90° | 160° | Brass, Copper, Steel, Iron, Ceramic, Glass, Wood | Transparent Yellow (Semi-Gloss) | 000000 | 000000 | 000000 |

Container | Dry Time | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Composition | Approx. Coverage @ Thick. | Touch, min. | Overall, hrs. | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
11 | Aerosol Can | Solvent Based | 17 sq. ft. @ 1 mil | 30 | 4 | 40° to 80° | Steel, Iron, Wood | Clear (Gloss) | 000000 | 00000 |
Heavy Duty Epoxy Primers for Metal

Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings. The two parts are contained in the same can; after activating, epoxy is usable for up to four days.
Primers for Metal

Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings. Apply with a brush, roller, or sprayer.
Acrylic primers are available in two colors. Choose gray primer for light-colored topcoats; red for dark topcoats.
Polyurethane primers can be applied in environments with high humidity or extreme temperatures. Surface must be visibly dry and free of frost and ice.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Formulation | Touch, min. | Overall Dry Time, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Topcoat Composition | For Use On | Choose a Color | Each | |
1 | Water Based | Acrylic | 30 | 4 | 372 sq. ft. @ 2 mil | 200° | Water Based | Aluminum, Steel, Iron, Galvanized Iron, Galvanized Steel | 000000 | 000000 | |
1 | Solvent Based | Polyurethane | 30 | 4 | 510 sq. ft. @ 2 mil | 250° | Solvent Based | Aluminum, Steel, Iron, Galvanized Iron, Galvanized Steel | Silver | 0000000 | 000000 |
Corrosion-Inhibiting Primers for Metal

These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Composition | Touch, min. | Overall, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Topcoat Composition | For Use On | Color | Pkg. Qty. | Each | |
Each | |||||||||||
12 | Solvent Based | 10 | 48 | 10 sq. ft. @ 1 mil | 350° | Solvent Based, Water Based | Aluminum, Steel, Iron, Galvanized Iron, Galvanized Steel | Green | 6 | 000000000 | 000000 |
12 | Solvent Based | 10 | 48 | 10 sq. ft. @ 1 mil | 350° | Solvent Based, Water Based | Aluminum, Steel, Iron, Galvanized Iron, Galvanized Steel | Yellow | 6 | 000000000 | 00000 |
Pkg. | |||||||||||
Pkg. | |||||||||||
12 | Solvent Based | 10 | 48 | 10 sq. ft. @ 1 mil | 350° | Solvent Based, Water Based | Aluminum, Steel, Iron, Galvanized Iron, Galvanized Steel | Green | 6 | 000000000 | 00000 |
12 | Solvent Based | 10 | 48 | 10 sq. ft. @ 1 mil | 350° | Solvent Based, Water Based | Aluminum, Steel, Iron, Galvanized Iron, Galvanized Steel | Yellow | 6 | 000000000 | 00000 |
Weld-Through Primers for Metal


Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.
Apply primers in a can with a brush or sprayer. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Net Weight, oz. | Composition | Touch, min. | Overall, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Topcoat Composition | For Use On | Color | Cannot Be Sold To | Each | |
Aerosol Can | ||||||||||||
__ | 12 1/2 | Solvent Based | 15 | 24 | __ | 250° | Solvent Based, Water Based | Aluminum, Steel, Iron | Gray | __ | 0000000 | 000000 |
Can | ||||||||||||
1 | __ | Solvent Based | 45 | 4 | 455 sq. ft. @ 2 mil | 120° | Solvent Based, Water Based | Steel, Iron | Black | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 00000 |
1 | __ | Solvent Based | 45 | 4 | 455 sq. ft. @ 2 mil | 120° | Solvent Based, Water Based | Steel, Iron | Gray | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 00000 |
Self-Healing Primers for Metal

Extend the life of your paint and coatings on damage-prone metal surfaces. When scratched or worn, these primers release small capsules of uncured primer to provide continued corrosion resistance. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
Primers cannot be sold to the listed regions due to regulatory limits on VOCs (volatile organic compounds).
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Touch, hrs. | Overall, hrs. | Approx. Coverage @ Thick. | Application Time After Mixing, min. | Max. Temp., °F | For Topcoat Composition | For Use On | Color | Cannot Be Sold To | Each | |
1 | Solvent Based | 8 | 14 | 200 sq. ft. @ 5 mil | 180 | 100° | Solvent Based, Water Based | Aluminum, Brass, Bronze, Copper, Steel, Iron, Galvanized Iron, Galvanized Steel | Gray | CT, DE, MD, NY, RI, UT, CA, CO | 000000 | 0000000 |
Filling Primers

These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings. Choose gray for light-color topcoats; red for medium-color topcoats; and black for dark topcoats.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Composition | Touch, min. | Overall, min. | Approx. Coverage @ Thick. | Max. Temp., °F | For Topcoat Composition | For Use On | Color | Pkg. Qty. | Each | |
Each | |||||||||||
11 | Solvent Based | 30 | 60 | 14 sq. ft. @ 1 mil | 250° | Solvent Based | Steel, Iron, Composites, Fiberglass, Wood | Black | 6 | 0000000 | 000000 |
11 | Solvent Based | 30 | 60 | 12 sq. ft. @ 1 mil | 200° | Solvent Based | Steel, Iron, Composites, Fiberglass, Wood | Gray | 6 | 0000000 | 00000 |
11 | Solvent Based | 30 | 60 | 14 sq. ft. @ 1 mil | 200° | Solvent Based | Steel, Iron, Composites, Fiberglass, Wood | Red | 6 | 0000000 | 00000 |
Pkg. | |||||||||||
Pkg. | |||||||||||
11 | Solvent Based | 30 | 60 | 14 sq. ft. @ 1 mil | 250° | Solvent Based | Steel, Iron, Composites, Fiberglass, Wood | Black | 6 | 00000000 | 00000 |
11 | Solvent Based | 30 | 60 | 12 sq. ft. @ 1 mil | 200° | Solvent Based | Steel, Iron, Composites, Fiberglass, Wood | Gray | 6 | 00000000 | 00000 |
11 | Solvent Based | 30 | 60 | 14 sq. ft. @ 1 mil | 200° | Solvent Based | Steel, Iron, Composites, Fiberglass, Wood | Red | 6 | 00000000 | 00000 |
Stain-Resistant Primers

Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
Acrylic primer can be applied directly to metal. It resists corrosion, mold, and mildew. Apply with a brush, pad, roller, or sprayer.
Shellac primer seals in odors and has the best stain-blocking ability of any of the primers we offer. It also seals knots and sap in wood. Apply with a brush, roller, or sprayer.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Touch, min. | Overall | Approx. Coverage @ Thick. | Max. Temp., °F | For Topcoat Composition | For Use On | Color | Each | |
Acrylic Primers | ||||||||||
1 | Water Based | 30 | 7 days | 300 sq. ft. @ 2 mil | 90° | Solvent Based, Water Based | Aluminum, Brass, Bronze, Copper, Steel, Plastic, Composites, Fiberglass, Concrete, Drywall | Gray | 000000 | 000000 |
Shellac Primers | ||||||||||
1 | Solvent Based | 20 | 45 min. | 250 sq. ft. @ 2 mil | 200° | Solvent Based, Water Based | Aluminum, Plastic, Fiberglass, Masonry, Concrete, Drywall, Wood | White | 000000 | 00000 |