Search Results
Current Current |
|---|
Wire Connection Type Wire Connection Type |
|---|
 |  |
| Screw Terminals | Wire Leads |
Material Material |
|---|
|
Wire Lead Covering Material Wire Lead Covering Material |
|---|
|
Watt Density Watt Density |
|---|
|
|
Heaters for Extrusion- and Injection-Molding Barrels
Heat resins, raw materials, and food with these heaters that fit around extrusion and injection-molding barrels. All require a temperature switch or controller (sold separately) to regulate heat output.
Note: The heater must be sized to fit tightly around the barrel to prevent air gaps that lead to inefficient heating and premature failure.
| For Barrel OD | Wd. | Wattage, W | Max. Heat Output, °F | Wire Connection Type | Material | Current, A | Each | |
120V AC, Single Phase | ||||||||
|---|---|---|---|---|---|---|---|---|
With Mica Insulation | ||||||||
| 3" | 1 1/2" | 400 | 900° | Screw Terminals | Steel | 3.3 | 00000000 | 000000 |
| 3 1/2" | 1 1/2" | 500 | 900° | Screw Terminals | Steel | 4.2 | 00000000 | 00000 |
| 3 1/2" | 2" | 650 | 900° | Screw Terminals | Steel | 5.4 | 00000000 | 00000 |
| 4" | 1" | 400 | 900° | Screw Terminals | Steel | 3.3 | 00000000 | 00000 |
| 4" | 2" | 550 | 900° | Screw Terminals | Steel | 4.6 | 00000000 | 00000 |
| 4" | 4" | 1,250 | 900° | Screw Terminals | Steel | 10.4 | 00000000 | 00000 |
| 4 1/2" | 2 1/2" | 1,000 | 900° | Screw Terminals | Steel | 8.3 | 00000000 | 00000 |
| 5" | 1 1/2" | 700 | 900° | Screw Terminals | Steel | 5.8 | 00000000 | 00000 |
| 6" | 1 1/2" | 850 | 900° | Screw Terminals | Steel | 7.1 | 00000000 | 00000 |
| 6" | 2" | 1,200 | 900° | Screw Terminals | Steel | 10 | 00000000 | 00000 |
| 7" | 1 1/2" | 1,000 | 900° | Screw Terminals | Steel | 8.3 | 00000000 | 00000 |
| 8" | 2" | 1,500 | 900° | Screw Terminals | Steel | 12.5 | 00000000 | 00000 |
| 9" | 1 1/2" | 1,200 | 900° | Screw Terminals | Steel | 10 | 00000000 | 00000 |
| 10" | 1 1/2" | 1,300 | 900° | Screw Terminals | Steel | 10.8 | 00000000 | 00000 |
| 12" | 2" | 1,700 | 900° | Screw Terminals | Steel | 14.2 | 00000000 | 000000 |
| 14" | 1 1/2" | 1,600 | 900° | Screw Terminals | Steel | 13.3 | 00000000 | 000000 |
240V AC, Single Phase | ||||||||
With Mica Insulation | ||||||||
| 3" | 1 1/2" | 400 | 900° | Screw Terminals | Steel | 1.7 | 00000000 | 00000 |
| 3 1/2" | 1 1/2" | 500 | 900° | Screw Terminals | Steel | 2.1 | 00000000 | 00000 |
| 3 1/2" | 2" | 650 | 900° | Screw Terminals | Steel | 2.7 | 00000000 | 00000 |
| 4" | 1" | 400 | 900° | Screw Terminals | Steel | 1.7 | 00000000 | 00000 |
| 4" | 2" | 550 | 900° | Screw Terminals | Steel | 2.3 | 00000000 | 00000 |
| 4" | 4" | 1,250 | 900° | Screw Terminals | Steel | 5.2 | 00000000 | 00000 |
| 4 1/2" | 2 1/2" | 1,000 | 900° | Screw Terminals | Steel | 4.2 | 00000000 | 00000 |
| 5" | 1 1/2" | 700 | 900° | Screw Terminals | Steel | 2.9 | 00000000 | 00000 |
| 6" | 1 1/2" | 850 | 900° | Screw Terminals | Steel | 3.5 | 00000000 | 00000 |
| 6" | 2" | 1,200 | 900° | Screw Terminals | Steel | 5 | 00000000 | 00000 |
| 7" | 1 1/2" | 1,000 | 900° | Screw Terminals | Steel | 4.2 | 00000000 | 00000 |
| 8" | 2" | 1,500 | 900° | Screw Terminals | Steel | 6.3 | 00000000 | 00000 |
| 9" | 1 1/2" | 1,800 | 900° | Screw Terminals | Steel | 5 | 00000000 | 00000 |
| 10" | 1 1/2" | 1,300 | 900° | Screw Terminals | Steel | 5.4 | 0000000 | 00000 |
| 12" | 2" | 2,300 | 900° | Screw Terminals | Steel | 7.1 | 00000000 | 000000 |
| 14" | 1 1/2" | 1,900 | 900° | Screw Terminals | Steel | 7.9 | 00000000 | 000000 |
Heaters for Nozzles
With Mica Insulation
With Mineral Insulation
Often used with extrusion, injection, and blow-molding machinery, these heaters clamp around nozzles to keep material warm for consistent discharge. They require a temperature switch or controller (sold separately) to regulate heat output.
Heaters with mineral insulation heat up faster than heaters with mica insulation.
Note: The heater must be sized to fit tightly around the barrel to prevent air gaps that lead to inefficient heating and premature failure.
Wire Lead | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Nozzle OD | Wd. | Wattage, W | Max. Heat Output, °F | Lg. | OD | Covering Material | Material | Current, A | Each | |
120V AC, Single Phase | ||||||||||
With Mica Insulation | ||||||||||
| 1" | 1" | 100 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.8 | 00000000 | 000000 |
| 1" | 1 1/2" | 150 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 00000 |
| 1" | 2" | 200 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.7 | 00000000 | 00000 |
| 1 1/2" | 1" | 150 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 00000 |
| 1 1/2" | 1 1/2" | 300 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 2.5 | 00000000 | 00000 |
| 1 1/2" | 2" | 300 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 2.5 | 00000000 | 00000 |
| 2" | 1 1/2" | 300 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 2.5 | 00000000 | 00000 |
| 2 1/2" | 1 1/2" | 350 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 2.9 | 00000000 | 00000 |
With Mineral Insulation | ||||||||||
| 1" | 1" | 150 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.3 | 00000000 | 00000 |
| 1" | 1 1/2" | 200 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.7 | 00000000 | 00000 |
| 1 1/2" | 1" | 225 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.9 | 00000000 | 00000 |
| 1 1/2" | 1 1/2" | 350 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 2.9 | 00000000 | 00000 |
| 1 1/2" | 2" | 400 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 3.3 | 00000000 | 00000 |
| 2" | 1 1/2" | 425 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 3.5 | 00000000 | 00000 |
| 2 1/2" | 1 1/2" | 525 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 4.4 | 00000000 | 00000 |
240V AC, Single Phase | ||||||||||
With Mica Insulation | ||||||||||
| 1" | 1" | 100 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.4 | 00000000 | 00000 |
| 1" | 1 1/2" | 150 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.6 | 00000000 | 00000 |
| 1" | 2" | 200 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.8 | 00000000 | 00000 |
| 1 1/2" | 1" | 150 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 0.6 | 00000000 | 00000 |
| 1 1/2" | 1 1/2" | 300 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 00000 |
| 1 1/2" | 2" | 300 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 00000 |
| 2" | 1 1/2" | 300 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.3 | 00000000 | 00000 |
| 2 1/2" | 1 1/2" | 350 | 1200° | 12" | 0.08" | Fiberglass | 430 Stainless Steel | 1.5 | 00000000 | 00000 |
With Mineral Insulation | ||||||||||
| 1" | 1 1/2" | 200 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 0.8 | 00000000 | 00000 |
| 1 1/2" | 1" | 225 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 0.9 | 00000000 | 00000 |
| 1 1/2" | 1 1/2" | 350 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.5 | 00000000 | 00000 |
| 1 1/2" | 2" | 400 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.7 | 00000000 | 00000 |
| 2" | 1 1/2" | 425 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 1.8 | 00000000 | 00000 |
| 2 1/2" | 1 1/2" | 525 | 1200° | 12" | 0.22" | Stainless Steel | 430 Stainless Steel | 2.2 | 00000000 | 00000 |
Bolt- and Clamp-Mount Heaters for Plates, Molds, and Dies
Also known as strip and disc heaters, these bolt or clamp onto flat metal parts to heat the surface through direct contact. All require a temperature switch or controller (sold separately) to regulate heat output.
Disc heaters should be attached to flat surfaces with mounting clamps (sold separately). Four are recommended for each heater.
Full Disc Heaters with Iron Sheath
Screw Terminal | 120V AC, Single Phase | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wattage, W | Watt Density, W/sq. in. | OD | Thick. | Max. Heat Output | Thread Size | Ht. | Mount. Hole Dia. | No. of Clamps Recommended | Each | |
| 200 | 11 | 3 1/4" | 11/32" | Not Rated | 6-32 | 7/16" | 5/16" | 4 | 0000000 | 000000 |
| 400 | 21 | 3 1/4" | 11/32" | Not Rated | 6-32 | 7/16" | 5/16" | 4 | 0000000 | 00000 |
| 400 | 24 | 3 1/4" | 5/16" | Not Rated | 6-32 | 7/16" | 13/64" | 4 | 0000000 | 00000 |
| Mounting Clamps for Disc Heaters | 0000000 | Each | 000000 |
Ring Disc Heaters with Chrome-Plated Steel Sheath
Screw Terminal | 120V AC, Single Phase | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wattage, W | Watt Density, W/sq. in. | Current, A | OD | ID | Thick. | Max. Heat Output, °F | Thread Size | Ht. | No. of Clamps Recommended | Each | |
| 200 | 12 | 1.7 | 3" | 7/8" | 1/4" | 1200° | 10-32 | 9/16" | 4 | 0000000 | 000000 |
| 300 | 18 | 2.5 | 3" | 7/8" | 1/4" | 1200° | 10-32 | 9/16" | 4 | 0000000 | 00000 |
| 500 | 19 | 4.2 | 4" | 1 11/16" | 5/16" | 1200° | 10-32 | 9/16" | 4 | 0000000 | 00000 |
| 660 | 12 | 5.5 | 6 1/8" | 3" | 5/16" | 1200° | 10-32 | 9/16" | 4 | 0000000 | 00000 |
| 1,000 | 19 | 8.3 | 6 1/8" | 3" | 5/16" | 1200° | 10-32 | 9/16" | 4 | 0000000 | 00000 |
| 1,800 | 19 | 15 | 11" | 8 1/2" | 5/16" | 1200° | 10-32 | 9/16" | 4 | 0000000 | 000000 |
| Mounting Clamps for Disc Heaters | 0000000 | Each | 000000 |
V-Belts
