Use these guns to dispense two-part adhesives. Do not use them with 3M dual cartridges.

Dispense two-part adhesives with compressed air. Use these guns only with 3M dual cartridges.

To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.

Use these plungers with a 3M dispensing gun for adhesives in dual cartridges.

Dispense small amounts of two-part adhesives.

Similar to a caulk gun, these guns are good for small jobs.

Thread these holders onto a gun to hold an adhesive cartridge.

Fill these cartridges with one-part adhesive.

Palm triggers make long-term operation more comfortable.

For use in high-volume production applications, these guns use electric heat to melt the adhesive and compressed air to keep it flowing.

Dispense 3M hot-melt adhesives with these guns.

Use these guns in heat-sensitive applications and on delicate materials. They have a temperature setting of 250° F.

These guns use polyurethane hot-melt cartridges for stronger bonds than other hot-melt adhesives.

Don't be tethered by a cord—take these guns where they're needed.

For easy cleanup, these trowels are disposable. They have V- or square-shaped notches.

Each pull of the trigger dispenses a set amount of liquid, making these guns useful for repeated dispensing applications.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Turn a small tube of grease into a dispenser.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Dispense grease with the highest-pressure-rated gun we offer.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.

Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.

Deliver small amounts of grease with only a light push against the lubrication point.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Dispense from grease guns into grease fittings and bare lubrication points.

Convert dispensing tips with male threads into quick-disconnect couplings.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

A display allows you to monitor how much grease is dispensed.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

Dispense grease using compressed air.

Pull the trigger on these oilers for easier one-hand operation than standard hand-held oil dispensers.

A needle dispensing tip provides fine control for lubricating small parts.

Deliver a mist of oil using shop air.

These dispensers have an opening for filling without removing the nozzle.