Add faucets to oil dispensing stations for increased utility.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.

These dispensers have an opening for filling without removing the nozzle.

A needle dispensing tip provides fine control for lubricating small parts.

Use suction to remove old lubricant from gear boxes and transmissions.

Control the flow of oil to a single lubrication point.

Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow.

Connect a tube fitting and tubing to the dispenser outlet to access hard-to-reach lubrication points.

Serve multiple lubrication points from a single location.

A solenoid automatically starts and stops flow to dispense lubricant while equipment is running.

Dispense from grease guns into grease fittings and bare lubrication points.

These rigid nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

Dispense from grease guns into grease fittings and bare lubrication points.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

Use compressed air to dispense grease.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.

Dispense small amounts of grease with this compact gun.

Dispense small amounts of grease with one of these compact guns.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Deliver small amounts of grease with only a light push against the lubrication point.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

A display allows you to monitor how much grease is dispensed.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Use with Snap-Loc hose to assemble and disassemble components.

This hose is made of steel.

Draw coolant from your existing tank.

These dispensers have a reservoir and controls for coolant flow.

Draw coolant from your existing tank.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

These nozzles handle coolant pressure up to 150 psi.

These nozzles handle coolant pressure up to 150 psi.

Adjust the flow while dispensing liquid chemicals.

Control the flow while dispensing diesel fuel with these nozzles.

Dispense and control the flow of coolant with these nozzles.

Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.

Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized.

These flexible needles can be cut to length.

The needles in these sets connect to adhesive cartridges, grease guns, and other dispensers with threaded connections.

Often used to spread adhesives when attached to syringes and dispensers with a luer lock connection.

Add a straw to an aerosol can for precise applications or replace a lost or clogged straw.

Push or pull the faucet handle to open; release the handle and the faucet automatically shuts off.

Primarily used on drums, these faucets can also be used on tanks, carboys, and other containers.

The gauge provides an instant visual check of liquid levels in your drum without interfering with the use of the faucet.

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Rotate the handle to dispense a continuous flow of liquid.

A 316 stainless steel housing makes these pumps resistant to coolants such as ethylene glycol.

Push the plunger to pump water, cleaners, and chemicals.

Extract water from valve boxes, meter pits, and other small spaces.

These pumps have a discharge hose for transfer applications and a vacuum breaker that drains the hose to prevent siphoning. A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

Rotate the handle to dispense a continuous flow of liquid.

Made with polypropylene components, these pumps withstand highly corrosive diesel exhaust fluid while preventing it from crystallizing.

For low-effort dispensing, these pumps have a lever handle that maximizes output with each stroke. Use them to pump lubricating oil, such as motor oil.

Including nozzles and connectors, these pumps come with everything you need to start pumping.

These pumps are C-UL listed for use in environments with flammable gases and combustible dust. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene.

A nozzle and hose allow you to dispense directly into your container. For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

The foot pedal allows hands-free operation.

With a nozzle and hose, these pumps allow you to dispense directly into your container. They move liquid by pressurizing the drum, so they have few moving parts prone to wear and tear.